I have the EQ 10 and am getting ready to order the batteries for this unit, I will be using A123's on both sides that are 4 cell each, 6.6v and are 4600Mah. My question is what size battery lead should I have the vendor use from the batteries that go to the Smart-Fly unit. I am running 16, JR 8711's and two JR 8411 on this system. I know lot of servos, on a 50% Hemple Edge 540

I would use the standard 16g wire.

Hi,
Standard 16ga wire is plenty. This generally comes standard with Deans connectors. Sometimes its even 14ga wire.

Originally Posted by rcheliman

I have the EQ 10 and am getting ready to order the batteries for this unit, I will be using A123's on both sides that are 4 cell each, 6.6v and are 4600Mah. My question is what size battery lead should I have the vendor use from the batteries that go to the Smart-Fly unit. I am running 16, JR 8711's and two JR 8411 on this system. I know lot of servos, on a 50% Hemple Edge 540

Thanks just want to make sure with such and expensive airplane.