|
|
|
Discussion
Need help!! EQ6 Turbo no ch 6&7 power led..
I did the reset and turned off the ign kill and when I power up channel 6 and 7 aren't lighting up. I went through the reset and still no workie (technical error). I've searched on here some and can't find anything.
PAU Ultimate Biplane DA-100 ch1) Throttle Hitec 7955 ch2) Left wing a)lower wing b) upper wing Futaba 9155's ch3) Elevator a) right b) left Hitec 7955 ch4) NOT IN USE ch5) EDR ign kill ch6) right wing a)lower wing b) upper wing Futaba 9155's ch7) Harris smoke pump ch8) Rudder Hitec 7950 |
|
|
|
|
ok, so I swapped channel 2 for channel 6 and when i unplug channel 6 from the receiver both lights come on. I moved the right wing to channel 7 on the smartfly and now all control services work but as soon as i plug in the signal wire for channel 6 the lights for 6 & 7 go out.
|
|
||
Phoenix, AZ
Joined Sep 2006
447 Posts
|
Quote:
|
|
|
|
|
WoW, Very quickly is an understatement!! sent out on Wed, back in the plane on Monday. Thanks so very much. Now on with the filming...
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
Thread Tools | |