OMG!!!! That's the best video ever!!! Fantastic job guys, that vid deserves an award.

Speechless....

HOLY CRAP! Where do I get one of those FG bikini's? Nice work HR!!! We need to hook up with Brett for a brew in HB sometime

Originally Posted by madmax

HOLY CRAP! Where do I get one of those FG bikini's? Nice work HR!!! We need to hook up with Brett for a brew in HB sometime

When you order the Jesky,does the Hot Chick come in a separate box??

No Max, you can't wear one of those bikini's...

Help ........

Those with FG AJ Fliton Extra, what method is used to hold the hatch down? rubber bands? mine has slots and hooks. Not sure, nothing in directions?

Ward,

The slots and hooks thing is explained in the addendum part of the instructions.
Inside the fuse there are two rods that sit vertically on each side of the fuse right over the slot where the wing hooks slide in. Bend the rods forward, slide the wing in and then let the rod snap back into the hook part of the wing.

Originally Posted by zzw26n

Help ........

Those with FG AJ Fliton Extra, what method is used to hold the hatch down? rubber bands? mine has slots and hooks. Not sure, nothing in directions?

Wayne,

What method is used to hold the Canopy & Hatch? I just saw a picture that showed a carbon rod & rubber bands.

Damn Ward, sorry. I misread your post.

The Hatch hold down is also on the adendum. I used the rod with two collars on it. One on each end. The rubber bands go around the rod in the fuse and are just used to hold pressure on the rod.
You pull the rod forward allowing the slots in the hatch to slip in, push the hatch down and re-lease the rod. The rubber bands help the rod slide back to engage the hooks.

Is that clear enough or you want a pic? Its hard to type it out but its really simple..

Originally Posted by Wayne

Damn Ward, sorry. I misread your post.

The Hatch hold down is also on the adendum. I used the rod with two collars on it. One on each end. The rubber bands go around the rod in the fuse and are just used to hold pressure on the rod.
You pull the rod forward allowing the slots in the hatch to slip in, push the hatch down and re-lease the rod. The rubber bands help the rod slide back to engage the hooks.

Is that clear enough or you want a pic? Its hard to type it out but its really simple..

Wayne,

Thanks! and N726AC was kind enough to take a picture for me, thanks, picture worth a thousand words.
I must of lost the adendum, had the parts and it's put together. How do you guys like the method?

Works great, there was mention in the ademdum about modifying
one of the hooks on the hatch to make it a one handed operation.

I'm waiting for a weather break to fly mine. Has anyone used a 11.1v 3-cell 2200mah / 6 oz. battery with their set-up? Mine would be a little on the tail-heavy side. A 11.1v 4-cell puts on the nose-heavy side.

Any input is appreciated .........

Ward

For 3-D stuff, balance on or slightly aft of the wing tube, with the canopy off.

And a "heads up",,,, the Katana MD wing tube is a drop in after shortening about 21mm. It is available from Atlanta Hobbys for about $8.
http://www.atlantahobby.com/shopexd.asp?id=6758

HIGHLY RECOMENDED !

Originally Posted by N726AC

For 3-D stuff, balance on or slightly aft of the wing tube, with the canopy off.

And a "heads up",,,, the Katana MD wing tube is a drop in after shortening about 21mm. It is available from Atlanta Hobbys for about $8.
http://www.atlantahobby.com/shopexd.asp?id=6758

HIGHLY RECOMENDED !

Thanks! What battery pack and motor did you end up with?