|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
What I think the hot ticket might be is header kits. First you start with the flange and a 1" straight tube and then flex tube is added to make the needed bend for almost any airframe.
Planebender |
|
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
|
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
|
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
|
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
|
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
I'm sure it will be awesome. If you are interested just PM Me.
Thank you Planebender |
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
With the 120 we tryed almost zero load (27X10th) to a Medium load (28X10) Mejlik to a good size load (29X10S) Mejlik. Also tryed the Vess 28B. The Vess 28B was a little loud but made a ton of power. The smoothest was by far the 29X10S. Hope this helps.
Planebender |
|
|
Yuba City CA. USA
Joined Oct 2007
13 Posts
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
I have a Krill Yak 55m with a DA-170. It had ks95 Canisters on it, we could not get that thing to run worth a darn. loaded up on takeoff and would not transition during manuvers. Was almost imposible to hover with no throttle responce. I was very unhappy to the point of wanting to dump the airplane. I watched Dave Sulivan fly his 260 with Pro Flow cans and was impressed. So we pulled off the Ks 95's on my Krill, Installed the new Pro Flow cans on it and MAN what a difference was like a new plane,throttle responce was very smooth with no hesitation. Hovers like a dream now. I know what cans I will be using in the future. PRO FLOW !!
|
|
|||||
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
Thanks Bob, I'm glad they worked well for you.
For all you DA-85 users out there, Here are a couple of short Video clips of a DA-85 with a Pro Flow 3D Canister with a 10.5" Header. You be the judge here. Smoothest 85 I have ever seen run.
Planebender<O</O<O</O |
||||
|
||
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
Quote:
Thanks, Travis |
|
|
||
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
Quote:
Planebender |
|
|
||
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
Quote:
That has to be the best running 85 I have heard to date. |
|
|
|
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
Video soon to come. I just installed the 170cc size Pro Flow 3D cans on my buddy Bryans slick and they did exactly what Dave said they'd do. No zero loading up on the low end and the midrange is smooth as glass. And for the sound guys they do sound awesome. On another note the cans and the engine preform very nicely on the mej 30X12 that I'm running on the plane.
|
|
|
United States, CA, Torrance
Joined Oct 2007
18 Posts
|
Re: FG EXCLUSIVE: PRO FLOW 3-D CANNISTERS
Hey Dave..... We've had four different exhaust systems on that Python. We started out with a greeves pipe and stock header, then switched to an RE-3 with a 14" header. That produced insane power, but was just too loud so we switched it to an MTW 110 canister. That combination was very quiet, still had excellent power, but still didn't have the mid-range we wanted. Your canister obviously did the trick........ We didn't even change the needles yesterday; just put on the ProFlo, cut the header down to 10.5", and you can see the results. The video tells the tale. This combination is a keeper!! Thanks Brother, Dave and James.......
|
Currently Active Users Viewing This Thread: 5 (0 members and 5 guests) | |
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Poll | Another Flight Line at Triple Tree | Spats | General Discussion | 25 | 07-30-2015 07:37 PM |