I'm looking for a large psp prop balancer. Psp does not make them anymore. If anyone knows where I can find one, let me know please.
Keenergarrett@yahoo.com

why don't you just get a rig like this that you can hang off the end of the table? http://www.ebay.com/itm/Tru-Spin-Pro...item53f8b3ec77

I have one of those.
The psp is much better

You can make your own.

There should be a 1mm or so of gap between the magnets and the rod in between to let it spin as free as possible.

It has closed gap over time but putting a bar across of slightly larger will reset the position over time.

Where did you get magnets?

Just google disc magmets.

I used 1inch diameter x 0.5inch thick Neodymium magnets for that. Black cones are from the TF balancer.

Thanx

interesting.

Originally Posted by Keener

Thanx

BTW, the 1inch hole is best done using a foster bit on a drill press.

Pick one these http://www.fema-modelltechnik.de/Web...ucht_engl.html distributors http://www.fema-modelltechnik.de/Web...tributors.html
its highly easy & quick.

I don't think the model- tech is what I'm looking for

Here's their contact details give them a buzz they do direct sales & can set you up in a jiffy : http://www.pspmfg.com/ContactPSPMFG.html

Psp no longer makes that balancer. I did call them..

I was under the impression that they ddid custom work too this being there product they can always set you up. The only option left for you now is if can source it from one of their dealers having old stock or resale . If you have one then take it to a custom work shop & have it copied or if they can give you the plans for it. I have been using the fema one for quite some time for large props & would recommend you trying one out.