Originally Posted by anders e

Keno, you dont need two or 7980. i have one 7950 on my 35% edge. I have done highspeed snaps without problems

I just want to be on the safe side....

Originally Posted by BR289

We have some NICE Futaba Graphics for it too.... on my desk waiting!

Can you define "it"? If "it" refrences MY airplane, how thoughtful of you. Can I bring you some SUPER-NICE JR DSMX graphics for your airplane?

Regarding servos, the 8911 and 7950s are not overkill by any means, but will do the job with no problem.

Of course you mean the Futaba BLS152 or BLS157 or 9156 or 9157

I have no problem with those servos, but am really happy with the 8911HVs. Last year's XFC was won using those..

Originally Posted by danielph

Can you define "it"? If "it" refrences MY airplane, how thoughtful of you. Can I bring you some SUPER-NICE JR DSMX graphics for your airplane?

Regarding servos, the 8911 and 7950s are not overkill by any means, but will do the job with no problem.

Yes, sure! They would look great with some black lines running through them!
You wouldn't be the first though as my longtime "Friend" who shall remain nameless did that to me a few times!

I am tempted to post more, but don't want this to turn into a JR vs. Futaba thread with an Extreme Flight name.

Lets put it this way. If you have the best airframe available (Extreme Flight), it really doesn't matter if you have JR or Futaba servos!

Originally Posted by danielph

I am tempted to post more, but don't want this to turn into a JR vs. Futaba thread with an Extreme Flight name.

Lets put it this way. If you have the best airframe available (Extreme Flight), it really doesn't matter if you have JR or Futaba servos!

Uh, yes it does!

Father Hinson.....separate your boys.
Jeff

... and to think I am the oldest here....

Originally Posted by danielph

We are running a single servo on the rudder. Just make sure that it has a minimum of 400 oz/in of torque. I'm running a JR 8911 and my brother will be using a Hitec 7950TH.

Ahem? I don't believe you are doing anything at the moment on this plane!

Just messing with ya, Daniel.

I am running a single Futaba 157HV (about 530 oz-in) and can not force the rudder to blowback under any conditions. I highly recommend that servo. That said, you'd probably be fine with a little lower torque servo as well, as I also noticed no blowback on Chris's Extra.

RJ

Originally Posted by BR289

Yes, sure! They would look great with some black lines running through them!
You wouldn't be the first though as my longtime "Friend" who shall remain nameless did that to me a few times!

If this happens at the Nall, I didn't do it....

Any release date yet?
This is supposed to be my competition airframe, but it seems like I have to renew my plans if it doesnt get available soon.....

Originally Posted by hpapilot

Ahem? I don't believe you are doing anything at the moment on this plane!

Just messing with ya, Daniel.

Forgive me o lucky one... I was referring to my experience with the inferior 120cc Extra that I'm currently flying. LOL

Originally Posted by Chris Todd

If this happens at the Nall, I didn't do it....

when this plane comes Out im about to Order the new Hangar 9 extra 300 To replace my H9 260 That i sell, but if the Extreme flight comes Out in the Next few week i wait to order, someone Knows this?

my last to big planes was H9 the 260 and my Last one the SUkhoi 26 mm se so im very happy with the brand and Quality but i can give a shot to a extreme flight Plane