Mine is also pull pull, I like my Cg pretty far forward, I have tried it both locations and like I said for my Cg preference pull pull was my final choice.

Andrew

And trust me.. that guy above doesn't know anything about this airplane.

heh

Here is a movie with my friend Alf M Løvold that tests my 104 Slick enjoy

Alf flyr 104 3DHS slick med Mintor 110cc (8 min 36 sec)

His comment: it's like a huge 3d trainer:-D

Originally Posted by Dubble-D

Here is a movie with my friend Alf M Løvold that tests my 104 Slick enjoy

Alf flyr 104 3DHS slick med Mintor 110cc - YouTube

His comment: it's like a huge 3d trainer:-D

Nice vid. Thanks for sharing.

I am replacing my 7950 in rudder with a Futaba 9157… what Futaba is good to replace my stab servos?

Originally Posted by AeroSheldon

I am replacing my 7950 in rudder with a Futaba 9157… what Futaba is good to replace my stab servos?

You have two on the rudder? I put the 9157's in my Pilot Edge and like them so far. They are faster, but I still think the Hitec 7955's a perfect for Giant scale planes.

Why do you want to replace the stab servos? The Futaba 9157's would be fine.
The 9157's seem to have a tiny bit of play at neutral, but are quieter than the Hitec's and may center a little better? Just my opinion.


Cory

I'm having some trouble figuring out how I want to setup a manual choke on the DLE 111. Anyone have any suggestions/pics.

On my DA-120 which is more or less the same and the DLE-111 in this respect, I just ran a wire with a "Z" bend straight down and thru a piece of Tygon fuel line.

I ran a carbon pushrod as a straight shot from the choke, through the first firewall so it exits just in front of the landing gear so I didn't have to make more holes in the cowling. Does take a little more leaning down to get to, but worked sweet for me...

...my favorite choke setup though was in my 87, a bell-crank up in the fuse to exit near the fuel dots, etc.

Originally Posted by crash0001

I'm having some trouble figuring out how I want to setup a manual choke on the DLE 111. Anyone have any suggestions/pics.

I was having the same issue so I went with a choke servo and the set up was quite easy.

Originally Posted by theKM

...my favorite choke setup though was in my 87, a bell-crank up in the fuse to exit near the fuel dots, etc.

Never saw that one before, sounds like a cool setup.

Here is how I did my DA-60 choke. Finally, a use for those red Hitec servo arms nobody ever uses.

Originally Posted by ghoffman

Here is how I did my DA-60 choke. Finally, a use for those red Hitec servo arms nobody ever uses.

yup, exactly! ...it's not all that tough, and can let you put the choke in a pretty easy spot to get to.

Thought I would take a few pictures and share em' before dirtying her up with smoke oil and sod.

Originally Posted by JCFLYR

Thought I would take a few pictures and share em' before dirtying her up with smoke oil and sod.

Looks good.