what size is the extra 300 ,100 cc ?

Yes, I believe it is. It is good looking to!

Kb can I make room for one more airplane ? Took a look see at hh and it is nice

Originally Posted by frank99

Kb can I make room for one more airplane ? Took a look see at hh and it is nice

FRANK!

I think he got in touch with customer service and not Product Support which would have been the correct people to talk to.



A.C. Glenn
Team Horizon Hobby
Team Hacker Motors
Team Thunder Power
Horizon Hobby Employee

Originally Posted by Robotech

FRANK!

Rotflmao!!!!!!

The H9 Extra 300 is 35% and is a great flyer, I have a DLE111 in mine. I think I need to move out aileron push rods to 1 1/4 hole to get a better roll rate on the Sukhoi. Other than that it flys super, for what few flights I have on it. I just haven't got to the field enough with the Sukhoi.
Rick

So how does this Suk fly on the 150? Maybe anyone with the RE3s installed as well?

Originally Posted by jraycut

So how does this Suk fly on the 150? Maybe anyone with the RE3s installed as well?

I was wondering the same thing. I have a DA 150 with MTW110's from my old plane and was thinking of getting RE3's for it.

A 150 on re3's is awesome. My bud has one and it weighs 38.5 lbs on this setup. Two servo's each wing, one on each stab, and two for the rudder in the tail. He usess a 3bld 28.5 12s mezzy as well. More than enough power. From what I've seen the 150's are matching or flat out beating the 170's when run with re3's. That's if the 170 doesn't have re3's as well. The 150 on re3's have been turning most props 6000 and up. Spinns the 3bld at 6100. Sounds like an f1 car. I have the same setup in my sbach, it's bullet proff and reliable.

Thanks Scott! That's good to hear.

I'll try and get some video for you this week end of the plane. really nice plane.

Mine is flying with a DA150 and RE3's, the power is awesome. uplines are great. Flies through the intermediate and advanced sequences without an issue.

Any other way to hinge the rudder? This little POS wire hinge thing does't work worth a crap. The wire won't fit in my drill, the PET jelly makes thing really slick, One of the hinges in the rudder is pushed in so far it won't let the rest of them align. Beginning to think this was all a huge mistake.

Originally Posted by Kevin B

Any other way to hinge the rudder? This little POS wire hinge thing does't work worth a crap. The wire won't fit in my drill, the PET jelly makes thing really slick, One of the hinges in the rudder is pushed in so far it won't let the rest of them align. Beginning to think this was all a huge mistake.

If one of the hinges is too far from the line up, you might be able to deflect the rudder to one side or the other to help get it in line. If that doesn't do it, then you could try to heat that hinge since most of these ARF's are put together with a glue gun type adhesive. If that still won't do it, the cut that hinge out of the way and keep going. I'd try heat and pull on it gently first. Good luck man.