About to get a Mejzlik 29x10S for 3dub 110 as the 28x10 rips badly in the air and seem not efficient.
has anyone tried to fit a 29x10s on a TruTurn 4.5" with a Menz cut spinner?? will it fit?

and what about the new 29 EVO?? is it going to be too much on regular muffs??

Originally Posted by saitofa100

About to get a Mejzlik 29x10S for 3dub 110 as the 28x10 rips badly in the air and seem not efficient.
has anyone tried to fit a 29x10s on a TruTurn 4.5" with a Menz cut spinner?? will it fit?

and what about the new 29 EVO?? is it going to be too much on regular muffs??

I used a PT 25X12-3 on my 3W-110 in a 35% H9 extra-----mostly IMAC flying.

Originally Posted by saitofa100

About to get a Mejzlik 29x10S for 3dub 110 as the 28x10 rips badly in the air and seem not efficient.
has anyone tried to fit a 29x10s on a TruTurn 4.5" with a Menz cut spinner?? will it fit?

and what about the new 29 EVO?? is it going to be too much on regular muffs??

I have the menz cut on my graphtec spinner and the 29x10s was way to wide to fit it.

Originally Posted by saitofa100

About to get a Mejzlik 29x10S for 3dub 110 as the 28x10 rips badly in the air and seem not efficient.
has anyone tried to fit a 29x10s on a TruTurn 4.5" with a Menz cut spinner?? will it fit?

and what about the new 29 EVO?? is it going to be too much on regular muffs??

The 29x10S Mej will not fit a spinner with a Menz cut, it's very wide at the hub much like a Biela..

You can either hack the h*ll out of your spinner or if you're running a Tru-Turn they already have a pattern for the 29x10S Mej so you can just buy a new cone which is what I did, and then I've never run the 29x10S 'cause I'm so pleased with the way the 28x12 Mej performs on my DA-120...

i have a 4.5" chromed tru turn so i don't know if i want to hack it. can anyone that has the 29x10s can tell me the width of the prop where the yellow line on the caliper in the picture??

Its about 1.950"

Thanks all for the info, i think i'm gonna go with the new 28x10 EVO instead that has more efficiancy and less rpm.