Originally Posted by hone1er

Thanks guys, i'll check out the different options.

I have used the EQ6 in the past and it is worth the money IMHO. There is an EQ6 Turbo for sale in the swap shop if you could use one with a regulator on it. It is super simple to set up the dual aileron servos with the EQ6.

Where can I get the biggest lipo for my a9?

Rudder is changing its center position when I go back and forth between low and high rates and it's enough to really mess up the trim in flight. Pretty sure it did not do this when new though not sure just how long its had this problem. Doesn't seem to be a problem on any other channel but it does occur on the 3 different models I had at the field today. I've gone through all the menus and can't find anything out of the ordinary. I don't have any conditions set up nor am I using any mixes.

I have a very stable and up to now working well set up so my software hasn't been updated in a while either.

Anyone else ever have this or have any specific menu items to take another look at?

thx.

look at the ost setting in the rates. That should be it. it is the offset.

Originally Posted by mchadwick63

look at the ost setting in the rates. That should be it. it is the offset.

Guess what? The OST was set to 0 in every model so that shouldn't have been the problem, I guess. But I went ahead and decided to USE the OST to actually try and fix the problem and it works so thanks! I also tested a different plane and found one that this rudder recentering didn't occur when switching dual rates on the rudder so I still don't really know what the root cause is because I think that rules out a general rudder dual rate bug in the TX software or some electro/mechanical issue in the dual rate switch itself.

Here is all the video you need to understand about common and single trim and anything else you want to know.
http://www.helifreak.com/showthread.php?t=223607

Heads up..

"Hey guys... just wanted to give you a heads up that there is a bug in this new version on the software. Hopefully we'll have it ironed out shortly but for now, when asked if you want to upgrade to the new version just say "No."
If you have updated it then send us an email (service at hitecrcd.com) and we can send you the older version in a .zip file. - Mike. "

Alan T.
Alan's Hobby, Model & RC FAQ Web Links

Originally Posted by A.T.

Heads up..

"Hey guys... just wanted to give you a heads up that there is a bug in this new version on the software. Hopefully we'll have it ironed out shortly but for now, when asked if you want to upgrade to the new version just say "No."
If you have updated it then send us an email (service at hitecrcd.com) and we can send you the older version in a .zip file. - Mike. "

Alan T.
Alan's Hobby, Model & RC FAQ Web Links

FYI: The bug in the HPP-22 software V1.15(1) is fixed. - Mike

Alan T.
Alan's Hobby, Model & RC FAQ Web Links

Got a question. How can I eliminate the need to enter a password every time I turn on the transmitter ?

Thanks.

Go to the "system" menu, touch the "info." button, touch the "password" button, enter your current password, then enter a blank password twice. It should show "password inhibited" once you've turned the function off. Exit out.

Originally Posted by myfivezees

Got a question. How can I eliminate the need to enter a password every time I turn on the transmitter ?

Thanks.

Thanks a bunch. That did the trick!!!

Hello,
i bought an aurora9 15 days ago;
Yesterday i updated it with Hpp22 ans (version 1.15. ) Updating of transmitter works fine, the standart receiver as well, but the spectra module does not update. When turning on the TX and touching the yes icon, the PC screen shows 3 photographs repeating all the time (they show how to do the procedure) but the update of spectra is not done.

The systeme works with the optima 9 receiver.(servo mouves)

But as i want to use the minima receiver, I need to uptdate the spectra midule to 3.0

Do you have an idea how i can manage this?

thank you verry much

UweS

I use the module in a Futaba transmitter, and I updated it directly from the Hpp22 with no problem.

Originally Posted by UweS

Hello, i bought an aurora9 15 days ago;
Yesterday i updated it with Hpp22 ans (version 1.15. ) Updating of transmitter works fine, the standart receiver as well, but the spectra module does not update. When turning on the TX and touching the yes icon, the PC screen shows 3 photographs repeating all the time (they show how to do the procedure) but the update of spectra is not done.
The systeme works with the optima 9 receiver.(servo mouves)
But as i want to use the minima receiver, I need to uptdate the spectra midule to 3.0
Do you have an idea how i can manage this?
thank you verry much UweS

1. Check transmitter battery is fully charged and that the module is fully inserted.
2. Remove and replace the lead firmly into both socket P-1 of the HPP-22 and socket on the module.
Have seen errors when lead is not fully pushed into sockets, plugs are very tight first few uses.
Follow on screen instructions and as under sub section
HPP-22 and Firmware
Hitec HPP-22 2.4GHz Programmer - Manual, FAQ - How to Install & Use
..(includes Screenshots & Current Firmware Versions for all related Units).
HPP-22 Clinic - Video by 2 brothers Hobby
Hitec HPP-22 - Replacement Leads, Extensions and DIY Access to Transceivers buried in models.
Hitec Programmers - Download Software for HPP-21 & HPP-21+ for Digital Servos.
Hitec Programmers - Download Station for HPP-22 - Enables update to Aurora 9, Optic Sport, Spectra 2.4Ghz Modules and Optima Transceivers.
HFP-20, HPP-21 & HPP-21+ - Manuals.
HPP-22 Firmware Upgrade History, now V 1.15(1) 21 Nov 2013.

in need, email or phone direct :
Hitec Warranty & Service - homepage.
Note: Hitec USA only services North/South America and Canada.
"Hitec USA customer service department is available Monday through Friday*
from 7am- 4:30 pm Pacific time. Reach us at 858.748.8440 or
service@hitecrcd.com any time you have a question"
• If you are from a country that is outside North and South America, please contact the
Hitec distributor in your country for service.

ex Hitec USA Support Forum Sticky:
Aurora 9, AFHSS 2.4Ghz Module, Transceivers_Receivers & Telemetry,
- FAQ, Setups & Tips {Individual Links often updated}

Alan T.
Alan's Hobby, Model & RC FAQ Web Links
.

Hello,
thank Your for this information. But unfortunately I did not find the needed answer. The connections are joined for shure. Did You hear about this problem before? Any Idea what I can do?