This is what I have to work with...

Aero-works 50cc Extra 260
DA50
Smart-fly PowerSystem Eq6 Plus
3 - batteries
Smart-fly ignition regulator
Ignition cut-off
Deluxe switch harness
Smart-fly switch

I understand that 2 batteries plug into the Smart-fly board but I want to make sure I wire the rest correctly. Please send a diagram or something I can use to do it right the first time.

Thanks

Charles - Louisiana

Hi Charles,
Since every system is so different we really do not have any diagrams.

You can call us or you can post some specific questions.

I am not sure what the Deluxe Switch Harness is, that is not our product. I also am not sure what "Smart-Fly switch" you have as we sell several types.

One item I can address, on the ignition the regulator should connect directly to the ignition module power. Basic ignition wiring is BATTERY->SWITCH(optional)->"Battery/Switch" Input of fiber-optic receiver/Ignition output of fiber-optic receiver->REGULATOR->IGNITION MODULE.

Any other connection questions I need you to ask me to address. Most of this can only hook up one way, its pretty straight forward in the instructions.

Originally Posted by chasnmich

This is what I have to work with...

Aero-works 50cc Extra 260
DA50
Smart-fly PowerSystem Eq6 Plus
3 - batteries
Smart-fly ignition regulator
Ignition cut-off
Deluxe switch harness
Smart-fly switch

I understand that 2 batteries plug into the Smart-fly board but I want to make sure I wire the rest correctly. Please send a diagram or something I can use to do it right the first time.

Thanks

Charles - Louisiana