Ok guys, I have never used a 3 blade prop and know nothing about them but want one for a DA60 in a EF edge for IMAC competition. What do I need?

No opinions?

Why do you need a 3 blade? IMAC doesn't dictate it, if its noise put a canister on.

3 blade props look cool.............. I'm flying a Biela 25X10 3 blade on my Yak SP-55M with a DLE-111. I haven't noticed a performance hit with the three blade versus a 27X10 two blade.

Look at a Biela 21X10, maybe a 22X10 if your DA-60 is strong. I'm breaking in an EME-60 right now that is on an Extra 300; once I get a few gallons through the engine most likely I'll put the Biela 21X10 on it.

I believe Troy Built Models has what your looking for.
RutnBuc

Thanks at least now I know what to look for. I already have a Proflow on it.

Hum, aarestor, if you are worried about noise, maybe it's time to go electric!

i posted this last week:
https://www.flyinggiants.com/forums/...ad.php?t=82101
the prop i am using is for a da 60. but now it is on my 50
and when i took her to club, i got 5900 rpm. not bad, just pitts muffler. once she was up in air, could hardly hear her, very very quiet.

2-Blades 24x823x1023x822x1222x1024x10 3-Blades 22x1022x12

Originally Posted by reelcoolfish

Hum, aarestor, if you are worried about noise, maybe it's time to go electric!

Don't need quiet I just have a 3 blade spinner and have never tried a 3 blade prop and always thought they looked cool.

I have a 22x10 on order and when I get it I will see how it compares to the 24B I have on it now.

Keep us updated, you have me interested in this as well.

Kendal would look funny with 3 eyes...lo

Originally Posted by Kbaerg

Keep us updated, you have me interested in this as well.

Will do. Looks like we might be coming to SF on the 20th.

3 blade on my trainer