Have a problem getting my EQ 10 with the wing servos, I have two that are functioning in the proper direction but Ive got the other that is backwards and I can seem to get the one to reverse. What am I doing wrong?

You'll have to dig into the manual but each servo has a position on one of those dials.

Yeah you set/ reversed, servo A on that Channel, but not Servo B.

Hi,
To reverse a servo you power the unit up normally with the Function switch on zero (0). Then you set the channel number you want to reverse the servos on. Then you select the servo you want to reverse on the function switch, A=5, B=6, C=7, D=8. The LED flashes slow for normal and fast for reversed. To turn enable reverse you push the increment button until the LED blinks fast. To disable reverse you push the decrement button. When you are done you should return the function to zero.

Originally Posted by rcheliman

Have a problem getting my EQ 10 with the wing servos, I have two that are functioning in the proper direction but Ive got the other that is backwards and I can seem to get the one to reverse. What am I doing wrong?

Thanks I'll give that a try and let you know how it works out. Thanks