SD 30% Yak

[Yak 54]

Hey I have a 30% SD Yak and a 3W 60CC engine and was wondering should I get the 5645 servos for it and if not any suggestions trying to stay under 50$ each

[Greyhoundman]

The 5645's will be fine for the elevator and ailerons, but you will need something more powerful for the rudder like a 5955 or 8611. On mine I run 8411's on ail and ele and 8611a on rudder. I have a 28% edge that I hve been running 5645's all around and had no problems except I was never satisfied with the rudder authority until I put a 5955 in there and its a night and day difference.

[Extra260]

Yeah cody, put do what he greyhound said. You will need a more powerfull servo on the rudder and this is for sure.

[adrian]

5955 for rudder minimum - its a wing not a rudder - lol- i used 5645 in the wings at first but later went with 5945 and it changed the whole plane - made it perfect so if you can put the best you can afford!!

[Yak 54]

I might go with 5955's not sure but any more suggestions?

[GmanBill]

I seem to prefer the Hitec TG's for my rudder servos, Just splerge on onw and run that 333oz badboy on your rudder at 6v, You wont have a problem. Check the prices out on all the high torque and high speed servos at http://www.troybuiltmodels.com/ Join there mailing list and you can get special pricing on servo's from the wonderful guys there.

[Yak 54]

I think I might put a 5955 on rudder and the rest 5645's exept for throttle mabye something a little cheaper is this a good idea?????

[Extra260]

Use a high speed on the throttle and what you were thinking on the others.

[Yak 54]

	Quote: Originally Posted by Yak 54
	I think I might put a 5955 on rudder and the rest 5645's exept for throttle mabye something a little cheaper is this a good idea?????

5955 on rudder and 5645 on the rest!

[luv2flyguy]

I'm using 5985's on ailerons and elevator and 5955 on the rudder, it's the bomb!

[Extra260]

	Quote: Originally Posted by Extra260
	Use a high speed on the throttle and what you were thinking on the others.

that is why I said what you were thinking!

[Yak 54]

oooooo should I use high speed needles on the others??

[cyoung450]

On my 30% YAK I am running 5955s on ailerons and rudder for the elevators I used 5985s and the throttle is a 5645. This is an awesome setup very crisp aileron authority and the new 5985s have a very similar case(strong) to the 5955s very good centering and power.

Conrad

[jonathanmanopla]

hi how are you alredy i buy a yak 54 30% of toc do you remember how much weight the plane when you buyed in the shippment i my weight is 27 lb the 2 boxes
thank