MAJOR 2.4 Ghz Spread Spectrum Release! A FlyingGiants Exclusive!

[madmax]

Gents, FG's stance on these photos is somewhat the same as Rob's - who knows when these photos were taken in the product development cycle, or by who. It is my understanding that there were only a small handfull of these prototypes in the states specifically for testing. I'm not convinced that these pics are shopped, but even if they are, what we could be seeing are debug/diagnostic ports, or a number of other possibilities. Heck, it might even be a trainer cable.

Bottom line is this -I can assure you that there is no conspiracy here, or SpektrumGate occuring. If Horizon finds that this is the best way to gain the best performance for MZ modules, then good for us consumers. If it is revealed later on that the modules require additional data from the DSC, and you already placed an order and do not like the setup, I have no doubt that Horizon will allow you to cancel your order right quick.

In the meantime, let's forgoe any unnecessary drama in regarding this topic. Thanks dudes.

MD

[Judge]

Bummer. I wanted a good conspiracy theory to keep things lively.

Are you sure that the devious Paul Beard and those scallywags at Horizon didn't do the Photoshop thing from behind the fence on top of the Grassy Knoll while filming a phoney moon landing in a studio in Los Angeles?? Can you PROVE IT??? Well, can you???

[madmax]

	Quote: Originally Posted by Judge
	Bummer. I wanted a good conspiracy theory to keep things lively. Are you sure that the devious Paul Beard and those scallywags at Horizon didn't do the Photoshop thing from behind the fence on top of the Grassy Knoll while filming a phoney moon landing in a studio in Los Angeles?? Can you PROVE IT??? Well, can you???

LOLOL! I highly doubt it.

[catman3070]

Here is some info for everyone with a MZ.

I was at the WRAM Show today, and spoke with the gentlemen from team Futaba regarding this info. They advised with that with the 12 and 14 the module doesn't work like the rest of them. The actual parts controlling frequency is all internal. They also wouldn't comment on upcoming radio changes, but they did say that they don't plan on out dating all the MZ radios.

So myself I am going to wait and see what the Toledo show brings. I believe that Horizon jumped the gun on this wanting to get everyone to jump on their wagon first.

[fun_fly_3d]

it could also be the shadow from the Antenna wire could it not? that is what i thought when I saw it.

just my dumb@$$ guess. it has been proven to not be worth a ***** on other threads . J'K.

Brian

P.S. i hope i don't offend anyone with this post!

[knighttwister]

	Quote: Originally Posted by JimC-MD
	Is $40 that big of a deal for something like this? For $239 you get the module and the same RX that would be in the DX7 package.

radio, servo matching etc.etc.

[aviti]

This advancement is great but it's starting to look like computers. You get the latest release and a few months later something much better is available. I'm having a hard time deciding when to pull the trigger. I hate to upgrade 3 or 4 planes with Spektrum receivers only to find out JR has a new high end transmitter that only works with JR SS receivers. I wish we knew what else was right around the corner....

[Elmo]

Hi All,

I have been reading/Following Flying Giants For awhile now ... it is the very least to say you guys are just Awesome A big Thank you !

I noticed in a previous post Andy asked a good Question about having two Receivers / Bat's on a 40%'er ,,,

My question is having a similar setup 2 bat's 2 receivers, how much current can AR9000 handle ? Another reason for having two receivers was to split the Current load. ( not uncommon to have two 4000mAH batteries)

Of course their is the " Power Expander/Emcotec/Duralite " Route but I like the KISS method... I'd put my cash down in a flash for two AR9000's , Imagine 2X Ar9000 with added Satellite rx's = total 8 Rx's i'd feel safe !


Thank You Spectrum !!!

Guglielmo Teoli ( Elmo )

[madmax]

Hey Elmo! I remember you buddy! Don't be a stranger bro!

[spektrumrc]

	Quote: Originally Posted by rob10000
	I'd like the Spectrum reps to comment on the apparent editing of the pictures of the 12/14MZ module. I'd accept that these pictures are of a protoype that didn't make the final cut. However, Horizon is accepting pre-orders for a stated late April delievery. Is that module going to have a 2nd cord like the pictures suggest, or have they eliminated it?

The MZ module does have a connection to the DSC interface. We have been trying to eliminate it but have not been sucessful so far.

Paul

[catman3070]

	Quote: Originally Posted by spektrumrc
	The MZ module does have a connection to the DSC interface. We have been trying to eliminate it but have not been sucessful so far. Paul

If you read my previous post it explains why it can't be eliminated.

Frequency change must be done internally by Futaba service center.

[wings19]

Regarding the AR6100 receiver... Would it work in my 47" Extreme Flight electric Yak? It's not quite a foamy or park flyer. I think the constraint is range?

[OverTemp]

Hey Folks,

Any word on whether or not you can use 1x7000 and 1x9000 at the same time, or do they both have to be the same type of RX?

Thanks

[spektrumrc]

	Quote: Originally Posted by wings19
	Regarding the AR6100 receiver... Would it work in my 47" Extreme Flight electric Yak? It's not quite a foamy or park flyer. I think the constraint is range?

I would use the AR7000 in this application. It's not a question of range but multipath reflections from the internal componenets such as the motor and battery.

The dual receiver in the AR7000 will always be able to resolve them..
Paul

[spektrumrc]

	Quote: Originally Posted by OverTemp
	Hey Folks, Any word on whether or not you can use 1x7000 and 1x9000 at the same time, or do they both have to be the same type of RX? Thanks

They both have to be the same.

Paul