Sweet!, just ordered "some" stuff!

[3D_Kid]

OK, I just ordered these things: Extreme Flight 47" E Yak (Black and Yelow) Complete 3S Combo, Berg 7 channel receiver, some Deans ultra plugs, Bantam eStation BC8 Charger/Balancer, Woot!! I can't wait!! This bird will be fun, will post pics when I get my thing in next week. Maybe even a build thread and a review of the BC8 Charger! Comments appreciated, Thanks,

The Kid

[3D_Kid]

The complete 3S Combo comes with:

Yak 54-E ARF
Torque 2814/820 brushless motor
Airboss 45 Sensorless ESC
4 X HiTec HS-65 servos
3 servo extensions
APC 14x7E prop
FlightPower 2170 3S1P Lithium Polymer Battery
Deans Connectors

ordered 2 more 14x7E props as well.

[UflyWhat]

I'm interested in how this combo works out

thanks

[3D_Kid]

	Quote: Originally Posted by UflyWhat
	I'm definetly interested in how this combo turns out, thanks

No problem, gladly will post pics with my cameraphone (not too bad of resolution; 1.2 MP) And might do a build thread of the plane and review of the charger. The BC8 eStation from Bantam comes with software to do batt. analyzing. I wonder if it will work on Vista, I hope so. This will be my first electric. Mostly got to do flying around school and home without the mess. Thanks,

The Kid

[3D_Kid]

charger:

[3D_Kid]

plane:

[Propstriker]

I have been flying this EF Yak on the same combo you are going to use, for about 6 months now. The only difference is the battery, I use thunderpower 2100's. I'm very happy with the performance, it flys like a big bird. It will hover at about 3/4 throttle and pull out is just OK. The only complaint I have, the gear is way to soft, it bends back at the slightest rough spot on our grass runway, and the wheels break at the spokes when flown off of asphalt. And the landings have been so nice and slow! Other than that, I love the way it flys!

I'd like to replace the gear with carbon, I think I heard graphtech is producing a set.

[3D_Kid]

	Quote: Originally Posted by Propstriker
	The only complaint I have, the gear is way to soft, it bends back at the slightest rough spot on our grass runway, and the wheels break at the spokes when flown off of asphalt. And the landings have been so nice and slow! Other than that, I love the way it flys! I'd like to replace the gear with carbon, I think I heard graphtech is producing a set.

I should be good, I'm on a grass runway.

[leblanc]

Thats awesome to hear!! I was thinking of this plane for my next project on 4 cell, and actually was thinking of a new charger, how many batteries can that charger charge at once? Just one?

Let me know!!

Thanks

LB

[3D_Kid]

It can only charge one battery at once, but that is not a big deal to me, most chargers now only have one output anyways. Batteries charge quick nowdays anyways.

[3D_Kid]

here's the specs:

Specifications:
Operating voltage
DC 11~18 volts
Idling current
approx. 100mA
Charge/discharge power
max. 150/30W
NiCd/MH
1~27 cells
LiIo/LiPo/LiFe
1~8 series
Pb
2~36V
Charge current
0.1 to 7.0A
Discharg current
0.1 to 5.0A
No. of cycle
1 to 5 times
Battery data memory
up to 10 data
Weight
1000g
Dimension
160x120x40 mm

User's manual (7947KB)


User's setting-up parameters
Lithium battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity
5 to 20mV
NiMH Delta-peak voltage sensitivity
5 to 20mV
Battery temperature cut-off
20 to 80C or OFF
Waste time between charge/discharge
1 to 60 min.
Trickle charge mode
ON/OFF, up to 200mA
Integral timer limit for safety
10 to 720 min.or OFF
Maximum charging capacity limit for safety
10 to 9990mAh or OFF
Key beep and buzzer sound
ON/OFF
Input power low alert
10 to 11V
LCD back-light brightness
1 to 100 steps



- Optimized operating software
When charging or discharging, BC8 has an 'AUTO' function that sets the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.

- High-power and high-performance circuit
BC8 employs the circuit that has maximum output power of 150W. As a result it can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.

- Individual voltage balancer for Lithium batteries inside
BC8 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.



** When the 'Balance charge' mode being performed, the balancing adapter should be connected to the balancing tab of battery pack, as well as the charger's charging lead should be connected to the output of battery pack.
And also, please pay attention to the polarity of the battery pack's output which goes to the charger's output. If it is reversed, the short-circuit can be happened on the battery pack.

- Balance individual cells on discharge
BC8 also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

- Accept various types of Lithium battery
BC8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

- Data store/load
For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- PC based analysis using USB communication
For technical expert, BC8 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

- Back-light LCD screen
You can adjust the brightness of LCD display

- Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat

[3D_Kid]

Woot!! guess what, my charger already shipped!! Ordered it 1:22 today said it shipped 4:40 today!! Wow what great service! http://www.rcaccessory.com/ is definitely the way to go!! Free shipping on orders over $150 in the US as well. Plus I got a free Vinyl logo thrown in for free.

[leblanc]

thats awesome to know!!

LB

[UflyWhat]

I've bought plenty of cables, switches, batteries, ect.. from rcaccessory.com. Good to hear others with the same success!

[RC Accessory]

I just came across this thread. If anyone has any questions on the e-Station line of chargers, please let me know.

Evan Chapkis
RC Accessory, Inc.
Auth US Bantam Importer