Fliton Extra 330 mini setup??

[Shawnlh]

I have the Fliton Extra 330 mini on the way, and I want to make sure that the motor, esc, battery, and servos I have in mind will work well for 3D flying. I was wanting to get the Hacker A30-28s/X-30 ESC combo, along with a Thunder Power Pro Lite 3s 11.1v 2100 lipo, and the new Hitec HS-65HB servos. I'm new to electric power so I'd like to get some input from you guys. If you have experience with these parts and have any advice, let me here you.

Thanks
Shawn

[bodywerks]

A bit too heavy, IMO. I ran a Hacker A20-20L, 10X4.7, 20 amp ESC, and TP1320 3-cell prolites and came in at 21 ounces. For a good wingloading, this is where you need to be. The vertical wasn't rocketship, but would power out of a hover. I had the A30-28 and TP 2100 in a Katana mini at 26 ounces, and vertical performance was better, but not good enough to justify adding that 4-5 ounces of extra weight to such a small plane. Also, if the HS 56's are lighter (I can't remember), go with those.

[Davide]

	Quote: Originally Posted by Shawnlh
	I have the Fliton Extra 330 mini on the way, and I want to make sure that the motor, esc, battery, and servos I have in mind will work well for 3D flying. I was wanting to get the Hacker A30-28s/X-30 ESC combo, along with a Thunder Power Pro Lite 3s 11.1v 2100 lipo, and the new Hitec HS-65HB servos. I'm new to electric power so I'd like to get some input from you guys. If you have experience with these parts and have any advice, let me here you. Thanks Shawn

this is an awesome setup! with that you'll have plenty of power and vertical climbs will rocks! if you want save weight go with bodywerks' setup