50% CUB BY BILL HEMPEL (NEW VIDEO)

[Wesse]

Can´t fly like Bill but I´m very happy to see this Big man´s Cub in Nall

[mike chandley]

Bill,
Are the 260s in the container with the cubs?
I am debating hard right now on another 260. I would hate to be without one.

[mike chandley]

Bill,
I have contacted Gerhard also about ordering me a 34X14 Fuchs 3-blade without the holes for the 342. I think it may work for us. I will keep you posted.

[toc pilot]

	Quote: Originally Posted by mike chandley
	Bill, I have contacted Gerhard also about ordering me a 34X14 Fuchs 3-blade without the holes for the 342. I think it may work for us. I will keep you posted.

Hi Mike,

I am sorry I did not get back with you. THe company I had making props has turned out to be a bad experience for me. The propellers were fine but the guy has some serious health issues. He is now appearently in the hospital. The props I have already paid for should be shipped within 3 weeks I am told. Because these props are paid for, I will wait until I get them before he gets the "your fired" notice.

I have a new propeller manufactuer and I have NEW 2-blade and 3-blade props coming. These propellers will be the same size as what I have being made with the original propeller company. The new company has a much better finish on the props but cost me about 20% more to produce.

Bottom line, I got screwed and I am in the process of fixing the issue. I will have props but not soon enough. I believe the prop you ordered through AI should work. As soon as I get mine in stock, I will let everyone know!

I am truely sorry for this un-profesional delay.

Bill Hempel

[toc pilot]

	Quote: Originally Posted by mike chandley
	Bill, Are the 260s in the container with the cubs? I am debating hard right now on another 260. I would hate to be without one.

I have 6 new 2008 scheme Extra 260's. 3 of them are pre-sold. I will take one for myself to replace the one I am flying now. There are only 2 avialable at this time.

I will keep you posted.

Bill Hempel

[authomassen]

Hi Bill!

Do you know the size of the box? I'll have to pick mine up in Oslo, and that's 375 miles from home. Don't want to do that drive twice because I bring a too small trailer the first time.

I remember you saying earlier in the thread that you use 1.5" airwild servoarms on all surfaces, but what do you use for the rudder pull-pull? And what should the drop be on the headers when using a 3W 157/170 amd canisters?

Thanks!
Audun

[mike chandley]

	Quote: Originally Posted by toc pilot
	Hi Mike, I am sorry I did not get back with you. THe company I had making props has turned out to be a bad experience for me. The propellers were fine but the guy has some serious health issues. He is now appearently in the hospital. The props I have already paid for should be shipped within 3 weeks I am told. Because these props are paid for, I will wait until I get them before he gets the "your fired" notice. I have a new propeller manufactuer and I have NEW 2-blade and 3-blade props coming. These propellers will be the same size as what I have being made with the original propeller company. The new company has a much better finish on the props but cost me about 20% more to produce. Bottom line, I got screwed and I am in the process of fixing the issue. I will have props but not soon enough. I believe the prop you ordered through AI should work. As soon as I get mine in stock, I will let everyone know! I am truely sorry for this un-profesional delay. Bill Hempel

It is ok! I do not mind the 20% more.

Fuchs is making my prop now and I will have it in 3-5 weeks I guess. It is close to $400, so yours looks good at $200

When do you expect the 260s to show up to you, and how long will it take for you to ship all these monsters out?

[snap a saurus]

	Quote: Originally Posted by mike chandley
	how long will it take for you to ship all these monsters out?

Good question

[toc pilot]

Well.... As soon as I get the planes I will start shipping them out. The only thing is, I will have to inspect them all prior to shipment to make sure they are all good! All of the boxes will need to be turned around and shipped.


Once I get confirmation the planes are on the water, I will request all customers get their final payment in, this will definatley reduce the turn-around time for the shipment. I expect it will take a week to get all the planes shipped.

I hope to post soon the container has shipped! Keep your fingers crossed we get that shipment out soon!

BH

[toc pilot]

The planes are shipping!

Ok, International orders that are having thier airplanes shipped direct from China will get their planes within a few days! Those planes are being shipped out TODAY!

For the rest of us, The container will leave Tuesday. China has admitted to delays and have come up with a small problem regarding the Cub....... They can not supply the cotter pins or the rubber gromments for the cowling. I told them to ship the planes anyway, I will have to supply those items seperatley. No big deal. So, the Cubs will ship on Tuesday.

THoughts?

Bill

[snap a saurus]

Hi Bill, if they ship Tuesday from China, when do we expect to see them?

[clivehodder]

	Quote: Originally Posted by toc pilot
	The planes are shipping! Ok, International orders that are having thier airplanes shipped direct from China will get their planes within a few days! Those planes are being shipped out TODAY! For the rest of us, The container will leave Tuesday. China has admitted to delays and have come up with a small problem regarding the Cub....... They can not supply the cotter pins or the rubber gromments for the cowling. I told them to ship the planes anyway, I will have to supply those items seperatley. No big deal. So, the Cubs will ship on Tuesday. THoughts? Bill

Bill,
Great news mate!............Just 1 question when you say shipping today, does that mean they would land in Australia from China soon like the next few days? (stupid question I know but I'm reaaaallllly keen)

Clive

Clive Hodder

[toc pilot]

Well, yes.

I have not received confrimation from China with the tracking numbers yet so I am thinking they 'meant' to ship them then. I will check agian tonight with China and let you guys know.

BH

Container can take between 12 day to 24 day to cross. Then it is Custom times and shipment from LA to Tucson. Hopefully things will be quick! I can do a quick turn for you guys for the NALL!
BH

[toc pilot]

GREAT NEWS!!!!

The 50% Cub has completed its first IMAC competition! The Cactus Classic was held in Phoenix this past weekend. My friend, Jeremy Valencia used the 50% Cub in his first IMAC contest. Jeremy has been flying Giant Scale stuff for only a few months when I offered this plane to him two weeks ago. With only a few practise flights before the contest Jeremy enter into the BASIC class and flew the Cub very well! I am very proud of his accomplishments and his 5th place finish out of 15 contestants. Great Job! There were 10 people that got beat by a 50% Cub! Yeah! lol.

The airplane was very well received at the contest with several people laughing at how big and beautiful the plane flew. I even heard a few judges laugh at how well the airplane performed as it was going into the 1 1/2 turn spin. chuckle, chuckle....

For the contest, I did a lot of work to help reduce the prototype's weight down to be easier to fly for the uplines. I removed the following items.

1- prop drill jig guid (used as 9 ounce weight in motor box)

2- aileron servos (10 ounces with wires and arms)

1- Rudder servo (5 ounces with wires and servo arm)

2- Scale 8.5" Cub wheels (replaced w/ 5.5" dubro's. 3 pounds difference)

Total weight savings for the contest was nearly 4.5 POUNDS!

Next weekend I will experiment with removing the 2lb dumb bell I have straped to the motor box and see how the CG feels. Anyway, the Cub flew very well and I am very proud of the plane/pilots accomplishments at this event. The "Cub" wheels are back on the plane and is ready for more flight testing this weekend. The plane now has 60+ flights on it and it keeps getting better.
Frank Noll (team Futaba Manager) made a suprise visit and was able to take the Cub around the patch for nearly 20 minutes Saturday afternoon. He was very impressed with the Cub and was heard giggling also to himself as he performed a Knife Edge Hover while facing into the 15 MPH wind! Great job Frank!

Just thought I would share this past weekend with all. If you were there and saw the Cub fly, please post your thoughts on this plane, thanks.

Bill Hempel

[SlowHuck]

	Quote: Originally Posted by toc pilot
	The 50% Cub has completed its first IMAC competition! The Cactus Classic was held in Phoenix this past weekend. My friend, Jeremy Valencia used the 50% Cub in his first IMAC contest. Jeremy has been flying Giant Scale stuff for only a few months when I offered this plane to him two weeks ago. With only a few practise flights before the contest Jeremy enter into the BASIC class and flew the Cub very well! I am very proud of his accomplishments and his 5th place finish out of 15 contestants. Great Job! There were 10 people that got beat by a 50% Cub! Yeah! lol.

This is great news! I have been obsessed with the notion of entering IMAC competition with a "non-traditional" airframe, specifically a clipped Cub.

My worry has been not so much that a Cub could not be able to execute the maneuvers as defined (the judging criteria is based on the geometry and accuracy of the lines, after all), but how it would present so differently than airframes optimized for aerobatics. That would seem to create a substantial challenge for the judges.

I'm all for big, lumbering aircraft that, rather than flying with scalpel-like precision, present more like the scale air-show characters that spectators can identify with. It would be good for IMAC and a great challenge for the pilots.

Big thumbs-up Bill!