Pitts Python

[luv2flyguy]

Is anyone on here flying the Pitts Python, either the QQ or the Bob Trueworthy 41%, I'm interested in mostly the Trueworthy model. Thanks in advance.

[dubd]

There are quite a few threads on FG regarding the QQ Python. I found some information on Bob Trueworthy's plane here: http://www.bigairplanes.com/

[grossy]

I'm flying this one http://www.chmodel.com/ProductShow.asp?ArticleID=188

Love it. Has a 3MM 53cc up front and flys like a dream.

Check out his web site, Chang is the manufacture. They are well priced.

Cheers
Grossy

[MadMonkey]

	Quote: Originally Posted by grossy
	I'm flying this one http://www.chmodel.com/ProductShow.asp?ArticleID=188 Love it. Has a 3MM 53cc up front and flys like a dream. Check out his web site, Chang is the manufacture. They are well priced. Cheers Grossy

Sorry to bring this back up, but I was wondering if there's a US distributor for these planes yet... anybody have more info on them?

[snap a saurus]

	Quote: Originally Posted by luv2flyguy
	Is anyone on here flying the Pitts Python, either the QQ or the Bob Trueworthy 41%, I'm interested in mostly the Trueworthy model. Thanks in advance.

I have a Bob Trueworthy 41 % Pitts Python and it's my favorite airplane.

[MikeC3D]

Hey Eli, is that a stock kit , or has it been modified like the one he did for QQ?


MikeC

[snap]

Snap a Saurus, that is one awsome looking plane!

[snap a saurus]

Thanks, it's not like QQ's plane nor it is stock, the mods are clipped wings and a single seat, I also have the 2 seat canopy, the Python is a one seater.
I have had it for a while, I fly it occasionally, it's a hangar queen but still my favorite.

[zzw26n]

Elie,

Can you give us the spec's; when was it built, Engine, Covering & Paint?

[snap a saurus]

	Quote: Originally Posted by zzw26n
	Eli, Can you give us the spec's; when was it built, Engine, Covering & Paint?

Hi Ward
Here is a thread when I test flew it but that was with the 2 seater canopy, I later switched to a 1 seat.
I also had the spinner and prop painted since.

http://www.flyinggiants.com/forums/f...itts-12-a.html

Built Summer of 2006
Builder is Tom Mikalauskus from Ohio a great builder.
Wingspan a little over 100 inches
Engine is a DA 150 with K&S 1090 tuned pipes with plenty of power.
Covering is Ultracote with printed graphics by Bryan Zang from Aerographics.
Paint, I am not sure but it is very nice.

[zzw26n]

Thanks Elie,

What a sweet Plane ....... looks like a Toledo Winner.

[Hinckley Bill]

Elie,

I've got the 41% kit and was looking at either the 3W200 or 3W242 ... would you consider the additional hp a good investment for the extra weight?

Bill

[MikeC3D]

What is the weight of the Pitts?

[snap a saurus]

	Quote: Originally Posted by Hinckley Bill
	Elie, I've got the 41% kit and was looking at either the 3W200 or 3W242 ... would you consider the additional hp a good investment for the extra weight? Bill

Hi Bill
I don't think you need a 200 or a 240, I have crazy power with my setup, you will have the added weight and added cost with the 200, 240, if you use the 1090 pipes with the 150 you will have plenty of power, trust me, I wish I had a video to show you the pulling power, I have to admit the pipes make a big difference, I will have it at the Joe Nall.
The plane is light for the size.

[snap a saurus]

	Quote: Originally Posted by MikeC3D
	What is the weight of the Pitts?

Mike
I did not weigh the Pitts but I would guess it's 45 to 47 Lbs.