Carbob fiber spinner

[meloni.racing]

Hi everybody,

I need a carbon fiber spinner with a for my plane,
I've found those two spinner:

Pete models 4 1/4 inch $ 105
BB carbon fiber Spinner 4 1/8 $ 66

There is a significant difference in price, but somebody have tried the BB carbon spinner? (overall quality ecc....)

Thanks to all again

[dmcquinn]

Sorry but I only have the wrong half of the answer you're looking for. I have used Pete's model CF spinner (4 or 5 inches) and they are of high quality. I've not heard of the other brand.

[exeter_acres]

Nor I... Only used Petes or Mejzlik

[meloni.racing]

better than nothing.........

PETE MODEL is equal to high quality
BB with 40$less ?$$

Any other?

[Howard Mathis]

I have had three Petes carbon fiber spinners and all have worked great. I probly would not use anything else.

[Vic3D]

Pete models spinners are the most popular spinners and have performed great. I heard BB spinners are good, but they are not in stock, and I called the guy yesterday and he has no clue when he's getting them back in stock.

[Flatlandman]

Here are some that some; I have a 4.5" ordered. They are center bolted like Tru turn spinners.

http://azurehobbies.com/index.php?cP...c8f64e09e49fc8

[3drat]

	Quote: Originally Posted by meloni.racing
	Hi everybody, I need a carbon fiber spinner with a for my plane, I've found those two spinner: Pete models 4 1/4 inch $ 105 BB carbon fiber Spinner 4 1/8 $ 66 There is a significant difference in price, but somebody have tried the BB carbon spinner? (overall quality ecc....) Thanks to all again

hi mate i have used pete model & pa not bad at all but get a center bolt azure spinner you will love it very strong & carbon back plate
http://www.azurehobbies.com
c

[Jim Woodward]

	Quote: Originally Posted by Flatlandman
	Here are some that some; I have a 4.5" ordered. They are center bolted like Tru turn spinners. http://azurehobbies.com/index.php?cP...c8f64e09e49fc8

How did this spinner work out? Longevity?
Thanks,
Jim

[Flatlandman]

The first one was destroyed on my gen4 qq yak crash but was used for ~20 gallons. The second one I have I bout off buddy who crashed the plane it was on. This second one is still going om H9 35% 260; but I'm not sure how long he had it before I got it. My friend who I bout second one from has a larger version on his 40% with good results so far.

[smokin]

for now, the pete's seem to be THE cf spinners. i have had nothing but succes with them and have found the quality to be superb.

[Flatlandman]

Im to lazy I like the center bolt method.

[Jim Woodward]

I like the center bolt. I've had problems with the Pete's model circumfrential mounting. Specifically, the hole closest to the prop cutout seems to chip-out.
Jim

[dmichael]

	Quote: Originally Posted by Jim Woodward
	I like the center bolt. I've had problems with the Pete's model circumfrential mounting. Specifically, the hole closest to the prop cutout seems to chip-out. Jim

I have used them for years- first thing I do is replace button heads with socket head 4-40's and nylon washers. I get black washers at the local Ace Hardware. Works great.

[JoeAirPort]

I'm trying a CF 4" Azure hobbies center bolt on my EF Yak for the 1st time. They sure look cool and don't set you back too much. Also if you get one from Azure don't forget to buy a CM6 plug or two while you're at it. Pretty cheap in Canadian $.