123 inch Extreme Flight Extra 300 !!!!!! SWEEEET

[Flatlandman]

The complainers will soon get there wishes. With all the crap this and other companies are getting with new coming products they will soon not tell the public any thing until they are ready for shipping. How would you like to find out that EF just came out with a 170cc yak 2 weeks after you buy something else. But if they give us the heads up that they're working on a 170cc yak and have delays which will happen 90% of the time on new product people on these sites get the panties all bunched up . So choose what you want to happen, know whats coming just dont know when or get blind sided buy a wonderful new product days after you blew the wad on some thing else. I choose to know whats coming w/ no real complaining rather than hope something is coming.

[mxcop]

	Quote: Originally Posted by ditchit
	Did that but with the horns already glued in its not easy to do. On a couple of horns the new holes don't align as well as they should. When you spend this kind of money you want it perfect. All EF have to do is put the different horns in separate bags or at least put a note in the kit. It's not obvious to someone who hasn't flown a multi-servo per aileron model before. Still . What bugs me is that EF won't even quote me a price for sending me new ailerons even though I think it is cr@p they don't put instructions in such an expensive kit.

How have you asked for the part price quote? Did you do it by email or phone? When did you do it? You should never glue multiple parts into or onto a surface without first checking to make sure the parts are all the same size and the holes line up, the blame goes to you on that one. If you have any questions regarding the building of the plane you can contact Extreme Flight, PM me and I'll answer it for you or check out the build thread here on this site. Considering you are one of a very small amount of people that have the plane I would be pretty happy.

Lee

[ditchit]

Everybody is entitled to an opinion Lee. I just respectfully don't agree with yours. I think it was a reasonable assumption that all the aileron horns were the same, and other experienced builders in my area think the same. There is another experienced pilot over here with a 123 who saw the difference in hole position but has put the horn pairs at the wrong ends of the ailerons!

I did dry fit each horn to ensure it was seated properly but just didn't see the difference. Sure, we all make mistakes but it wouldn't happen if there had just been a tiny bit of guidance. It's probably the only bit of the assembly that's possible to get wrong and that is a credit to EFs design of the kit. I emailed EF late last week and got a reply suggesting I re-drill holes. My preference is for new parts. I want the airframe to be perfect and I personally don't want to risk the model on a horn that has been weakened by another hole being drilled.

[mxcop]

Ditchit, check your PM, hope this will help ease your feelings....

Lee

[ditchit]

Appreciate that Lee. Thankyou.

[Rush7]

All I can say is that I am totally hapumped about the 123" EF Extra. The way EF planes fly it has never mattered to me how long it takes for them to come out.

They are the best ARF on the market period.

[Rush7]

Oops double post.....dumb phone.

[Sukhoikid]

Was wondering the ailerons are not already glued in?

[danielph]

I believe that they are, but could be wrong.

[Rush7]

	Quote: Originally Posted by Sukhoikid
	Was wondering the ailerons are not already glued in?

If I am not mistaking the hinges are all glued in but they pocket type hinges so the pin can be removed and you can remove the aileron. The elevator and thr rudder are the same.

[mxcop]

	Quote: Originally Posted by Rush7
	If I am not mistaking the hinges are all glued in but they pocket type hinges so the pin can be removed and you can remove the aileron. The elevator and thr rudder are the same.

You're right

Lee

[Sukhoikid]

	Quote: Originally Posted by mxcop
	You're right Lee

Ok I must have misread another thread about the ailerons not lining up?

Cant wait to get my hands on one and fly it that is for sure!

Maybe Wayne will let me 3D it..... he he he....

[wmat7039]

	Quote: Originally Posted by Sukhoikid
	Ok I must have misread another thread about the ailerons not lining up? Cant wait to get my hands on one and fly it that is for sure! Maybe Wayne will let me 3D it..... he he he....

http://www.flyinggiants.com/forums/s...6&postcount=51

Hey Kevin...you are too dangerous.... Won't let you touch this one...
Wayne

[Sukhoikid]

	Quote: Originally Posted by wmat7039
	http://www.flyinggiants.com/forums/s...6&postcount=51 Hey Kevin...you are too dangerous.... Won't let you touch this one... Wayne

hey wayne the funny thing is when I did break a plane in the air I was doing IMAC and not 3D lol!

[exeter_acres]

Yes...they are pocket hinges... all surfaces are removable....