Looking for Pitts S2S Plans

[grover]

Hi
I'm looking for a set of plans for a 1/3 scale or bigger Pitts s2s ?
Please Help me find a set

Greg Grover
QLD Australia

[grover]

Still looking
Please HELP
Greg

[MadDuc]

Hi Greg,

You may want to check this link: http://www.rcuniverse.com/forum/m_1563599/tm.htm

A lot of free plans, maybe you can find something there, since nothing has been posted here yet.

Good luck!

[grover]

Hi MadDuc
Thank you
I have looked on all the sites but have only found one set of plans for the Pitts S2S.
The plans are for a 25cu motor and are not the best to scale plans I have seen. They are not to scale at all.
The plans I'm looking for are Andy Sheber 1/3. I know that Bob Dively has a kit .It is just the cost of
shipping to OZ .

Greg

[MadDuc]

I found these on ebay:

http://cgi.ebay.de/Royal-PITTS-S-2-S...em360095585294
S2 special but 1/4 scale


I also found these plans of the Pitts 12 with a spam of 2.50m, would that be ok? Or does it really have to be a S2S? I believe I have downloaded free plans for a large scale Pitts 12 a while ago, had difficulty finding it, but if you would settle for a Pitts 12 I am willing to look a bit further.
http://cgi.ebay.de/Pitts-12-Bauplan-...3A1|240%3A1318

[grover]

Yes it does have be a Pitts S2S.
I'm looking at doing some mods to it to make a Jim LeRoy's Pitts Bulldog .
I have plans of the Pitts 12
thank you
The Royal Pitts s2s is out of scale to
I do have the plans from http://www.rcuniverse.com.

http://www.blackflight.com/pitts25/pitts-s2s-25.zip
You all so need tile print from http://www.blackflight.com
to print them out but printing 50 pages out is just too much ink and paper and I can't do any mods to the plans

Greg

[MadDuc]

http://plans.aerofred.com/

Have you checked this site already as well?

[grover]

Yes I did go to http://plans.aerofred.com/
I did find a Pitts S1S on there .

I can just hope some one has a set of Andy Sheber 1/3 plans that can scan for me .
I will pay for the plans of course .

Greg

[MadDuc]

Good luck!

[FLYINMIKE]

You May Want To Check Here : http://www.bobdivelymodels.com/

[grover]

Thanks FLYINMIKE

I did get onto Bill from http://www.bobdivelymodels.com/
He has the plans for a Pitts S2a .Bob Dively is the same as Andy Sheber plane
I have a set of Bob plans plus Mike Smart Pitts S1c plans coming.

So far I have the Plans for:
Airborne (Rodde' B Heslehurst) S2a ,
Royal Pitts S2a ,
Scratch a plane 1/4 scale Pitts S1c,
Pitts from www.blackflight.com.

a copy plans of a full size Pitts S1c with the S1S wings .
Plus some pages from full size Pitts S2b plans


Greg

Yes I'm turning into a PITTS NUT CASE

[Phrydaddy]

The Pilot Plans, which are designated S-2A, are actually as close to the S-2S as you may get. The Great Planes Pitts is actually made from Pilot Plans (or at least thats what Ive been told)
I have a buddy that flies a black Pitts with Flames on it , Hint
He claims that the Pilot Plans are Pretty Close.

[MODE 1]

maybe here
http://www.hostetlersplans.com/index.html#plans

[brycesteenburg]

grover, I have a Pilot Pitts s2a kit in the 1\3 scale. It is also missing the plans and the cowl. I have also been told that the Great Planes 1\3 Pitts is a direct copy of the Pilot Pitts. I asked on a few forums for anybody that had the plans to contact me, finally found a guy in the Denver area that had the plans and he sent them to me. I took pics of the plans and sent them back to him. I work off the pics of the plans from my computer. I am planning on completing this plane this winter and power it with a 70cc single and a 3 blade prop. I could send you the pics of the plans if you would like, just let me know.
Here is some pics of the fuse partially put together.

Bryce

[Phrydaddy]

Brycesteenburg,
Are the Pilot Plans you have 1/3rd scale or actually 1/3.5 scale which is actually around 28% ????
The Great Planes version which every one likes to call 1/3 is actually 1/3.5
Which Im pretty sure both the Pilot Eagle and the Pitts were as well.
I have a set of these plans blown up to 80" top span making it 33%. My problem is that the parts sheet I got was not quite up to Par with the rest of the plans. How good is the Parts sheet on your plans??
Cheers
Jim Freiberger