60% BH EXTRA, HOW BIG IS TOO BIG ?

[Slayer]

Elie, only one thing comes to mind,

B to da A to da D --- A to da double S !!!!!!!!!!!

[snap a saurus]

	Quote: Originally Posted by cbk07
	The thrust washer has a 1/2" square drive built into it....may have to rig up a starter driven by you moped Snap

You think my moped motor will turn the 342

	Quote: Originally Posted by heligrom
	Looking good there Elie!! that plane really is huge. over a gallon of fluids total on board. thats pretty ridiculous, what are we looking at for flight times?

I expect 10 minutes flights and should have plenty left.

	Quote: Originally Posted by 3D Meatshield
	I'll donate my shoulder to flip that monster- but only if I get a chance to snap-a-saurus that monster

Meat, I can use your shoulder but not sure about your fingers unless you're mode 1.

	Quote: Originally Posted by John Light
	Elie, Plane looks great. I will start on our stuff this week. It has taken me 2 weeks to get all our stuff ordered. It is not easy ordering 90 - 9157 servos and arms, 300 feet of servo wire, prolinks, 10 - receivers, 5 - royale power boxes and the list goes on. I am having trouble finding the sullivan 7 inch tires and the 10 -32 hardware. I may have to use 6 inch tires and make my own hardware. If you know where I can get some, let me know. I am still working on finding the 7 inch spinners. I did talk to my friend rick at tru-turn and he said he would make them if you guy's want to spend the money. It may be our only choice. Call me and we can talk about the prop selections and the way you mounted the engine. The rubber gromments may not be the best way to mount the engine. Just call me when you have time to talk John

John
The plane is an ARF but what makes it so hard to work on is the size, being so big you can't just maneuver it like a 40% so it takes a little longer to finish, the Grommets worked fine on the motor, I will try them and see what happens, beggers can't be choosers, the pitt Beotches did it so I will take it, I usually order stuff that I expect to use and happen to have the 10/32 hardware which I used, I stock up good on just about everything, I have ordered few things to finish the plane, everything else I had, I need to get a prop and need your advice, I will give you a call to discuss that, here is the link to the tires, I got it from Bill.
http://www.sullivanproducts.com/WheelsMainFrame.htm

	Quote: Originally Posted by MikeC3D
	Make a CF spinner, I bet I know someone that has molds.....

Mike, I like the CF spinner idea, how can we get a 7 inch One, otherwise I am putting a 6 inch CF spinner.

[snap a saurus]

	Quote: Originally Posted by JClark
	Better hurry John, April is getting closer. Better tell that pit biotch Jared to get on the ball and help you get these things together.

Mr Clark
Stay away from this, don't listen to him john, I want to be the only One with a 60%.

	Quote: Originally Posted by Slayer
	Elie, only one thing comes to mind, B to da A to da D --- A to da double S !!!!!!!!!!!

It will have BAD ASS on it

[Bunky F. Knuckle]

Elie, sorry to say, I'm not able to help you reinstall the LG into that monster, like we did to your Edge.

[3dAndrew]

Hey Snap, is it possible for me and my dad to drive up from long island to see you maiden this thing? Please..... I have grown since last year so i might be able to assist with the engine starting!LOL Let me know when your done, the day that you maiden this monster will be HISTORY OF THE GIANTS!

[snap a saurus]

	Quote: Originally Posted by Bunky F. Knuckle
	Elie, sorry to say, I'm not able to help you reinstall the LG into that monster, like we did to your Edge.

Bunky, good to hear from you, ok you don't have to reinstall the gear but how about fixing the prop??, I still have that One.

	Quote: Originally Posted by 3dAndrew
	Hey Snap, is it possible for me and my dad to drive up from long island to see you maiden this thing? Please..... I have grown since last year so i might be able to assist with the engine starting!LOL Let me know when your done, the day that you maiden this monster will be HISTORY OF THE GIANTS!

Andrew, sure, I will let you know, the only problem is if you come up here and we have an issue and the plane don't fly, I hate to see you disappointed, you will have to come at your own risk.

[snap a saurus]

	Quote: Originally Posted by Bunky F. Knuckle
	Elie, sorry to say, I'm not able to help you reinstall the LG into that monster, like we did to your Edge.

Bunky, good to hear from you, ok you don't have to reinstall the gear but how about fixing the prop??, I still have that One.

	Quote: Originally Posted by 3dAndrew
	Hey Snap, is it possible for me and my dad to drive up from long island to see you maiden this thing? Please..... I have grown since last year so i might be able to assist with the engine starting!LOL Let me know when your done, the day that you maiden this monster will be HISTORY OF THE GIANTS!

Andrew, sure, I will let you know, the only problem is if you come up here and we have an issue and the plane don't fly, I hate to see you disappointed, .

[Craven]

ECHO!!

[Bunky F. Knuckle]

No kiddin, Greg!!! I think he was excited to hear from me..... Down there little fellow!!!

Elie, note to self man.......... Only push the reply button ONCE!!!!

I'll fix the prop, only if I can glue the tip back together!!! Some 49 hour epoxy would work nice!!!

[askforplanes]

This motor would be perfect http://starrair.com/pages/engines.html (if specs are accurate). Compared to the 3w 342 it is about 6lbs lighter, has 4 more hp (up to 9 more) and is 62cc's smaller.

[John Light]

Jared,
I don't think I will have a problem getting the planes done for the Dallas event. I just hope we get the new trailer by then. I sold my 28 foot enclosed trailer and I ordered a new 40 foot trailer. The company told me I should have it by the end of March. I hope so because it will take a couple of weeks to get it ready to haul airplanes and by then it will be time to leave for Dallas. We will just have to wait to see what happens.
John Light
EXTREME HOBBIES

[JClark]

Good luck John.
Hopefully you guys will make Dallas, if not I am sure we will get together sometime.

[TheTank]

	Quote: Originally Posted by askforplanes
	This motor would be perfect http://starrair.com/pages/engines.html (if specs are accurate). Compared to the 3w 342 it is about 6lbs lighter, has 4 more hp (up to 9 more) and is 62cc's smaller.

Only if he wanted to spin some serious rpms and go pylon racing! 900-9600RPM range with recommended props of 22x40 and 21x29... Not exactly ideal for this application. Probably a relatively short stroke motor designed for high rpms and racing applications...

[John Light]

OK guy's I need a little help. Does anybody have the new web site address for the company in Germany that produces the big ultimate and the big raven? I don't have any problems with our big ultimate, I just want to ask Olaf some questions. The web site used to be weimo.net.
Thanks,
John Light
EXTREME HOBBIES

[askforplanes]

	Quote: Originally Posted by TheTank
	Only if he wanted to spin some serious rpms and go pylon racing! 900-9600RPM range with recommended props of 22x40 and 21x29... Not exactly ideal for this application. Probably a relatively short stroke motor designed for high rpms and racing applications...

Here is an ad from rcu http://www.rcuniverse.com/market/item.cfm?itemId=351845, it says they have a 3d version.