60% BH EXTRA, HOW BIG IS TOO BIG ?

[3drat]

	Quote: Originally Posted by jimbomilligan
	I took the friday off so I can have the xtra day at the event. Problem is my friends trailor I borrowed last year will be in use on a job site. Will only have one plane as the jeep can only fit one 35%. Any suggestions???

The roof i do it
cg

eli looking good mate i can not wait to see the vid good luck
cheers glen

[smokin]

rent a commercial van.... or a uhaul pull behind trailer!?!?!?!

[Tikka]

	Quote: Originally Posted by snap a saurus
	Tikka 200 inch Ultimate is almost full scale, WOW. I am working on programing the plane now and being extra careful and taking my time, I am also waiting for the prop. Tikka, you are welcome at any Huckfest and if you ever make the One in CT, you're welcome to stay at my house, just let me know, I must warn you though, Huckfests are addictive.

Hi Elie.

I will come to the Huckfest in CT, when is it this year? Maybe I can make it. It is really nice of you to invite me to stay at your house,and I accept the invitation. I think it will be a blast. One cracy norwegian visiting the US and A. Looking forward to it.

[snap a saurus]

	Quote: Originally Posted by jimbomilligan
	I took the friday off so I can have the xtra day at the event. Problem is my friends trailor I borrowed last year will be in use on a job site. Will only have one plane as the jeep can only fit one 35%. Any suggestions???

At least you will make it with One plane, I will take that but more is better.

	Quote: Originally Posted by ChickenStick Rick
	Get a bigger Jeep!

Yes get a 150% Jeep.

	Quote: Originally Posted by 3drat
	The roof i do it cg eli looking good mate i can not wait to see the vid good luck cheers glen

The roof isn't a bad idea.
Thanks Glen

[snap a saurus]

	Quote: Originally Posted by smokin
	rent a commercial van.... or a uhaul pull behind trailer!?!?!?!

There you go, here is another good idea.

	Quote: Originally Posted by Tikka
	Hi Elie. I will come to the Huckfest in CT, when is it this year? Maybe I can make it. It is really nice of you to invite me to stay at your house,and I accept the invitation. I think it will be a blast. One cracy norwegian visiting the US and A. Looking forward to it.

Crazy Norwegian, don't forget to bring your 200 Inch Ultimate, just kidding. Mark your calender, the Huckfest is July 31, August 1 and 2 and yes it will be a blast just like every Huckfest has been, see you and cheers

[jimbomilligan]

Excellent ideas!! Maybe if I had a 200" Ultimate I could fly over there!!

[RollingHarrier]

Hey Elie, Check out these guys for props.
http://www.sensenichprop.com/
Just ran across them on the web.

[66stang]

Eli is it true if you get a flat on your trailer, you can use the tire off your plane for a spare?

[Mike Busutil]

	Quote: Originally Posted by RollingHarrier
	Hey Elie, Check out these guys for props. http://www.sensenichprop.com/ Just ran across them on the web.

I use these props on our UAV's at work, they do well but I have never used one on a 3D plane before.

[snap a saurus]

	Quote: Originally Posted by RollingHarrier
	Hey Elie, Check out these guys for props. http://www.sensenichprop.com/ Just ran across them on the web.

Jim
I can't find One in the 38 to 40 inch range

	Quote: Originally Posted by 66stang
	Eli is it true if you get a flat on your trailer, you can use the tire off your plane for a spare?

Stang, it's big enough but no way they are too expensive, the spare is much cheaper.

	Quote: Originally Posted by Mike Busutil
	I use these props on our UAV's at work, they do well but I have never used one on a 3D plane before.

Mike
Maybe I should try an airboat prop, I think it will 3D well.

[WrongWayRC]

Snap....I stilll have the 38x14 JC SuperProp order for you. Don't hold me to it but am hearing couple more weeks. I am not sure if Donnie has mentioned it to you on not. Will that be your break in prop or the one after break in?

Richard

[RollingHarrier]

	Quote: Originally Posted by snap a saurus
	Jim I can't find One in the 38 to 40 inch range

Oh Ya I forgot the one you needed was so small!

[John Light]

Tikka,
I would like to see some pictures of the 200 inch Ultimate you are building. What do you think the weight will be and will it have flying wires on the main wings? If you need a 684, I have another brand new one with the y pipes and cans I would sell you at a real good price. (I also have some 342's left if anybody is interested) Our Ultimate is a weimo kit but I am not using his wings or stabs. I am going to make my own because I can make them alot lighter. Also I am going to do the main wings so they don't need flying wires. My weight will be 100lbs or less. I want to make sure it is legal to fly at our events.
Thanks,
John Light
EXTREME HOBBIES

[snap a saurus]

	Quote: Originally Posted by WrongWayRC
	Snap....I stilll have the 38x14 JC SuperProp order for you. Don't hold me to it but am hearing couple more weeks. I am not sure if Donnie has mentioned it to you on not. Will that be your break in prop or the one after break in? Richard

Richard, no problem, I need that prop, I am not sure if it will be the break in prop, I have a feeling it will be the after break in prop, we will find out, please let me know when you get it.

	Quote: Originally Posted by RollingHarrier
	Oh Ya I forgot the one you needed was so small!

Yes a 38x14 is small

	Quote: Originally Posted by John Light
	Tikka, I would like to see some pictures of the 200 inch Ultimate you are building. What do you think the weight will be and will it have flying wires on the main wings? If you need a 684, I have another brand new one with the y pipes and cans I would sell you at a real good price. (I also have some 342's left if anybody is interested) Our Ultimate is a weimo kit but I am not using his wings or stabs. I am going to make my own because I can make them alot lighter. Also I am going to do the main wings so they don't need flying wires. My weight will be 100lbs or less. I want to make sure it is legal to fly at our events. Thanks, John Light EXTREME HOBBIES

I like to know too.

[Tikka]

I don't have any pictures yet, most of the wood for the airframe has been cut, and my main issue is GLUE. But I'm close to decide on what glue to use. The wing ribs are lacercut, and will be built like the fullsize Ultimate's wings. Flying wires is not an issue I have thought too much about, but I was planning on using it. My goal of weight is 132 lbs, ready to fly. Many builders in Norway and England, think I will end up with a weight, twice as much as that. They say it MUST be that heavy, or it will fall apart during flight. Well, we'll see. Planning on using 2 Seikos pr wing half, 2 Seikos for the rudder, and 8 400oz/in servos on the elevators. I was planning on using a 3W 520cc 4 syl engine, but will not decide before I know a little more about the weight. But I'll keep you updated, and maybe start a build thread here at FG.

Back to you, Elie