GIANTS FROM DOWN UNDER (Continued)

[boxhead41]

	Quote: Originally Posted by vincentp
	scott, one more thing, you will probably want to go with a higher cell count, if you do the math you will find you will be pulling more current than the speedy can deliver.. result is letting the smoke out. Don't ask me how I know this.. (anyone want a slightly (ab)used 100A turnigy speedy ). I'm using this one in my angel.. works great : http://www.hobbycity.com/hobbyking/s...idProduct=8921 Vince.

thanks for that vince im not sure what it weighs as it is a new plane in the box, it says for .60-.90 or electric so i am looking at what i need to set it up as electric to fly here at home so i can get a little practice here on those calm afternoons, thats why i asked im not sure what to put in it just thought that set up would do the job without being too overloaded thanks for the help i will do a little more hunting now

[boxhead41]

	Quote: Originally Posted by Jag01
	Agree with Vince, 5S would be the shot and perhaps this motor http://www.hobbycity.com/hobbyking/s..._270Kv_/_2100W However I would reccomend 30c or 40c packs. cheers, jeff

thanks jeff
i looked at that one as well but wasnt sure whether to go with that one or the other one.

[Phillip Daynes]

HI guys All listed flyers sould have recieved an email regarding entry conformation to the marsters so please fill it in and send it back . Mark Eastern was the only one that the email seems not to have reached. So I will try to reach him tomorrow.
PS there will be an asaa funded bbq on friday night at the caravan park with an informal metting weather permitting.

cheers Phillip Daynes

[Jag01]

Boxhead,

mate to give you a point of reference, I fly one of these, http://www.dghaikong.com/showpro.asp?ID=29

On the motor your first choice of motors http://unitedhobbies.com/hobbyking/s..._580Kv_/_1580w

I use a 5s 3700mah 25c pack, running an 80 amp speedy, swinging a 15x8 prop it pulls about 58amps and the vertical flight performance is unbelievable.

I can easily get 7 minutes of IMAC style flying out of it and still have reserve in the battery.

Cheers,

Jeff

[boxhead41]

	Quote: Originally Posted by Jag01
	Boxhead, mate to give you a point of reference, I fly one of these, http://www.dghaikong.com/showpro.asp?ID=29 On the motor your first choice of motors http://unitedhobbies.com/hobbyking/s..._580Kv_/_1580w I use a 5s 3700mah 25c pack, running an 80 amp speedy, swinging a 15x8 prop it pulls about 58amps and the vertical flight performance is unbelievable. I can easily get 7 minutes of IMAC style flying out of it and still have reserve in the battery. Cheers, Jeff

thanks jeff they are basically the same size plane so the set up i was looking at should be fine then this is the plane it is going into
http://http://www.aero-works.net/sto...il.aspx?ID=336
its 60in wingspan with a 55in fuse all going well i shall order some gear for it today.
regards scott

[timbo0279]

	Quote: Originally Posted by Richo
	No Corona's yet!! I'm still at work! Tim, you need to get a job that keeps you busy!!!! Still need to keep the headers at the same length, I'm also not to keen on the rear header butting into the front one. A nice Y branch would be more efficient. To keep the lenght the same, perhaps start the front header bending back 40mm and the rear header bending forward 40mm.

Here you go mate... Have a look at the attached pdf.. option 2 is the easiest, can keep them at 240mm in header length.. but it has a drop of 130mm... option 1 has a longer header length, at 313mm, but it maintains the 80mm drop...

The only problem I see with these options is fabricating the 2 into 1 join in the middle... going to be fiddly... Let us know if I am on the right path...

[Jamieman]

	Quote: Originally Posted by timbo0279
	Here you go mate... Have a look at the attached pdf.. option 2 is the easiest, can keep them at 240mm in header length.. but it has a drop of 130mm... option 1 has a longer header length, at 313mm, but it maintains the 80mm drop... The only problem I see with these options is fabricating the 2 into 1 join in the middle... going to be fiddly... Let us know if I am on the right path...

Impressive drawings man.

What cad you using

[nakia]

FOR SALE OR SWAP

Set of MTW TD110K Cannister Mufflers
Price $260
Used set of MTW TD110K Cannisters. Condition is fair, have a few dints in them here and there but function perfectly. Call mobile 0458713547 *WILL TRADE BOTH FOR 1 MTW TD75*

Contact - nakia brewer on Telephone - 02 49329056 nakia.brewer@westrac.com.au

[3dubya]

wing tube yaks out luke yipee..

[scottb]

	Quote: Originally Posted by 3dubya
	wing tube yaks out luke yipee..

Has it been TD tested?
Pink Panther mk1 is reborn and flies tomorrow.
Scottb

[3dubya]

	Quote: Originally Posted by scottb
	Has it been TD tested? Pink Panther mk1 is reborn and flies tomorrow. Scottb

ill test it. look after my bm6 horse

[RustyTumbles]

What is going on with that avitar TD??????? It's like photographic evidence of a mum joke......

[Stu_D]

Did you notice that TONY is Y NOT backwards .

[mad mal]

td you are a disturbed man thats for sure! looking forward to bm6 Thanks stu/phill.

[TROYS PIT-BITCH]

The tube version looks sweet TD