Wolverine setup with two regulator and one Rx

[kingfd]

Thank you guys!!! when it will be ready I will update with pics of the setup

Daniel

[kingfd]

	Quote: Originally Posted by JoeAirPort
	I use a single batt and switch with a Dean's Ultra on the input and two JR plugs on the output for my 50cc planes. I just use a really good quality switch and a very low impedance battery pack (1950 FAUP 5-cell) and install them right. I never have problems on 5 planes setup like this. No regulators for me. My next 50cc setup will probably be 2 x A123 1100mah into a Wolverine with two Dean's Ultra inputs and two JR output plugs.

Hey Joe!
My recommend about using a A123 battries is to use the Fromeco Kodiak switch with the Amp counter. why? Because the A123 is alway (after10-15min) showing 6V when you check it, so you cant know when you need to recharge the battery. but whaen you use the Kodiak swutch you know how much mAp was wasted from your battery.

that just my recommend

Daniel

[vicent99]

it´s posible to join to sahara´s regulator with only one pin flag to turn on them.

thanks a lot

[Fromeco]

Hi Vicent99

No you can't, this has to do with board level things and crossing ground planes in a bad spot. It is a good idea in theory but don't do that.

KC