Aerotech R/C Models is BACK!

[Pro1Foam]

	Quote: Originally Posted by sukhoi26
	Apparently you don't read all the post on here.These are New owners. Matt didn't buy the old problems.

Hey, its always worth a try.

I know things will change but when you buy a company you buy its reputation also.

Good luck to you guys and I wish you the best.

[smokin]

We at The New Aerotech are ready and willing to accept full responsibility for any Aerotech related issues dating from April 29th, 2009 on. That is when we purchased the assets of this company. We are fully aware that some folks will have some assistance questions regarding previous dealings and we are certainly willing to listen and get you to the people that are responsible for all Aerotech dealings prior to our acquisition of the assets. I am quite certain that everyone that deals with The New Aerotech will quickly see that we are 100% customer service driven. We can only strive to impress on a going-forward basis and hope to be given the benefit of a clean slate.

Thank you and again, we look forward to meeting as many of you as possible!

Keep Flyin'!

Matt Mikesh

[Pro1Foam]

	Quote: Originally Posted by smokin
	We at The New Aerotech are ready and willing to accept full responsibility for any Aerotech related issues dating from April 29th, 2009 on. That is when we purchased the assets of this company. We are fully aware that some folks will have some assistance questions regarding previous dealings and we are certainly willing to listen and get you to the people that are responsible for all Aerotech dealings prior to our acquisition of the assets. I am quite certain that everyone that deals with The New Aerotech will quickly see that we are 100% customer service driven. We can only strive to impress on a going-forward basis and hope to be given the benefit of a clean slate. Thank you and again, we look forward to meeting as many of you as possible! Keep Flyin'! Matt Mikesh

I just got off the phone and will second his comments from above. I wish this transaction would have taken place long ago. This model line is one of the best and I expect a full recovery!!

Matt, thanks for all that you do.

Pro1

[VooDoo Child]

	Quote: Originally Posted by "X" Rated
	Can I be on your pilot team????

Haaaaaay !!! I am already working this side of the street LOL

[fingers]

This sounds awesome! so I have to put in my request. I will start with the why, I am building from plans the 35% Wendell Hostetler Pitts s1-11b. The plans are very old school hand drawn nothing is going easy AT ALL! So I would like to see a nice cad drawn laser cut Pitts Challenger, not the m-12 or an Ultimate but a well designed Challenger. This fine plane has gone the way of the dinosaur. It needs to be brought back to the main stream and I feel you guys are the ones to do it.

[heath bomb]

Hey Matt,

I have an older Aerotech edge and the instruction manual is non-exstinant and basically I have screwed everything up in the process (trial and error new builder). Could I buy you and Rob a few cases of your beverage of choice at the St. Louis Huckfest in exchange for building tips? Also I was looking on the website and the old owner stated that the Yak 55 will be available in June. Is that still true? One final question will you have any parts available for the edges b/c I am pretty sure that I will either be needing some or possibly a whole new wing kit? Thanks again for taking this on and I know it will be a success.

[eagle flyer]

Hi i visted your website and it looks good. I have a question, Your 50cc yak is out of stock, when do you expect to have them in stock and are you going to build a 50cc size Extra 260.

[sweetpea]

The website is still the "old" website. Its also already been posted that this summer is when the real changes will happen and production will really start. More to come after the Nall as the new owners are headed there!

[VooDoo Child]

They are already at the Nall......reached there around 5:00 today....Lucky Dogs.

[Gordo]

This is the best . To see guys come together to make a new venture out of an old hat . Fresh blood and full sails always make for a winning combo . CONGRATS and the best. Gordo

[dicksnyder]

I ordered an Aerotech 35% Edge in Jan from Starrflight. It came in March, just 36" sheeting some real soft 3/8th sq and plans. The wing tube and LG was included. April most of rest came, ply parts etc. Canopy came by itself from west coast. No 48" sheeting, Had to beg John for instructions. Tom nusta e-mailed him 25 times trying to get all the kit parts. I finally bought all the wood I needed and started building, but my heart isn't in it. The wheel pants were CRAP so I sent them back to John last Monday. Am hoping these guys will help me out on them. They were way too big, had been patched several places, had 1/4" holes in them. Was gonna fix them up, but decided weren't worth effort. Don't know how guy could include them in a kit.
Does anybody know if new guys will be using same addess, e-mail, etc.?
If anybody knows of new address or whatever, would appreciate a note.
Thanks, Dick Snyder n52ds@verizon.net

[sensei]

There new phone number is 563-321-8455, keep in mind that the new owners are not responsible for the dealings of past, but I am sure they will do what they can for you within reason.

Bob

[Cracky]

Congratulations!!!

[LawnJockey]

Here is my Aerotech kit . I love the way this plane flies.

LJ

[ohahonen]

Good luck to the new owners! I wish you all the best. What is the situation with Aerotech Pitts Model 12S Python ARF? Will it be continued?

Best regards,

Otto