Smart Fly EQ6

Home

My FlyingGiants

Blogs

Classifieds

FORUMS

Members

News

Search

Find New Posts

All Forums

Subscribed Forums

View Unanswered Threads

Search Forums

Show Posts Show Threads

Advanced Search

Tools

Post Hucker

Mark Forums Read

Sign Up!

BigJohn · 06-07-2009, 01:48 PM

Ok got a question here but first let me say what I have.I have a H9 33% Edge with a GT80 up front and yes I know its not the best chose but its what was put up front 4 years ago as thats what was recomended and it worked for me.I am resetting the plane up as I'm not a extream pilot just a sport pilot I don't see the need for over the top servo's as I used anologe last setup but have desided to up the servo install.I'm new to the EQ6 but like alot of what it has to offer with dual servos and no need for matchboxes.OK here is the thing I'm checking over all the items as I will be using Hitec 5625 dual setup on each aileron,single each side Hitec 7985 for elevators,single 7955 Hitec for rudder and a single analoge for throttle.The problem is when I power the system up the right aileron servo's hold but the left aileron servo's running in channel 6 jump and return to normal.Any reason for this as I'm still a few weeks away from putting it into the air.I'm using a JR 9303 2.4 with a Spektrum 9000 attatched to the EQ6 and am running 2x2s3700 LiPos for power.What do you think or is it nothing to worry about.John

Oilsands · 06-07-2009, 06:52 PM

I don't think it is a problem or anything to worry about, but I would ask Robert who would know for sure. He has a forum under the Everything Else and FG Sponsored Tech Support http://www.flyinggiants.com/forums/fg178/

ds1rc · 06-07-2009, 07:07 PM

BigJohn, re-bind the 9000 to the 9303, that should eliminate any failsafe irregularities. Then power up transmitter then receiver.

BigJohn · 06-08-2009, 12:00 PM

LOL you know what I didn't think to rebind as I did a rebind when I was matching the receiver to the radio.But since then I have just been pluging in servos and setting up the servo's.I will try that and if all else I will ask yet another question from Robert as I have asked a couple question already about the unit.I really like this thing as I keep playing around with it finding out more and more each time I fire it up.Thanks,John

sweetpea · 06-08-2009, 12:41 PM

Also make sure you don't have any of the power leads in the batt channel. I believe there is a note about that from SF.

06-07-2009, 01:48 PM	#1
BigJohn If I could I would Join Date: Jan 2007 Location: Fort Erie ONT. Canada Posts: 11	Smart Fly EQ6 Ok got a question here but first let me say what I have.I have a H9 33% Edge with a GT80 up front and yes I know its not the best chose but its what was put up front 4 years ago as thats what was recomended and it worked for me.I am resetting the plane up as I'm not a extream pilot just a sport pilot I don't see the need for over the top servo's as I used anologe last setup but have desided to up the servo install.I'm new to the EQ6 but like alot of what it has to offer with dual servos and no need for matchboxes.OK here is the thing I'm checking over all the items as I will be using Hitec 5625 dual setup on each aileron,single each side Hitec 7985 for elevators,single 7955 Hitec for rudder and a single analoge for throttle.The problem is when I power the system up the right aileron servo's hold but the left aileron servo's running in channel 6 jump and return to normal.Any reason for this as I'm still a few weeks away from putting it into the air.I'm using a JR 9303 2.4 with a Spektrum 9000 attatched to the EQ6 and am running 2x2s3700 LiPos for power.What do you think or is it nothing to worry about.John

06-07-2009, 06:52 PM	#2
Oilsands Oilsands Join Date: Nov 2007 Location: Fort McMurray, Alberta, Canada Posts: 1,403	Re: Smart Fly EQ6 I don't think it is a problem or anything to worry about, but I would ask Robert who would know for sure. He has a forum under the Everything Else and FG Sponsored Tech Support http://www.flyinggiants.com/forums/fg178/ __________________ Anthony MAAC#78933 IMAC#5720 PAU 36% Edge 540 Jtec 3.2m Extra 330L Comp-arf 2.6m Yak 55sp PAU mini Yak

06-07-2009, 07:07 PM	#3
ds1rc Bad-ass Super Contributer! Join Date: Jan 2006 Location: Aloha OR Age: 81 Posts: 217	Re: Smart Fly EQ6 BigJohn, re-bind the 9000 to the 9303, that should eliminate any failsafe irregularities. Then power up transmitter then receiver.

06-08-2009, 12:00 PM	#4
BigJohn If I could I would Join Date: Jan 2007 Location: Fort Erie ONT. Canada Posts: 11	Re: Smart Fly EQ6 LOL you know what I didn't think to rebind as I did a rebind when I was matching the receiver to the radio.But since then I have just been pluging in servos and setting up the servo's.I will try that and if all else I will ask yet another question from Robert as I have asked a couple question already about the unit.I really like this thing as I keep playing around with it finding out more and more each time I fire it up.Thanks,John

06-08-2009, 12:41 PM	#5
sweetpea If you can't HUCK it BLING IT! Join Date: Jan 2006 Location: Just Moved.......Hampton VA Age: 37 Posts: 9,269 Awards Showcase Total Awards: 2	Re: Smart Fly EQ6 Also make sure you don't have any of the power leads in the batt channel. I believe there is a note about that from SF. __________________ Offical Member of Team Caribou Lou "Some people spend an entire lifetime wondering if they made a difference in the world. But the U.S. ARMED FORCES don't have that problem." ...Ronald Reagan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Smart Fly regulators in parallel	simo10	Onboard Electronics	5	03-31-2009 01:54 PM
Smart fly P. expander Pro w/ Mpi regs?	djmisterpe	Onboard Electronics	11	03-31-2009 12:44 PM
AMA Convention: Smart Fly	Uncle Brett	Leading Edge Homepage Article Discussions	17	01-25-2008 08:10 AM
How to mount a Smart Fly power expander	Jason Michael	Onboard Electronics	4	01-17-2008 08:46 PM
Smart FLy Turbo-Reg	Neogenesis	What's Hot	30	10-17-2007 11:59 AM