50cc Yak 54 2.2m

[typer]

Also I made another landing gear, a fiber one, more ligther than the original. So thats all for the moment... lets hope we will fly our planes at the end :P

Ah, also I reinforced the platform with plywood of 3mm...
and very important, I reasambled the motor box...because of the glue!

I hope my experience with this plane will help you to fix the CG issue.

[hannustar]

does are some great modifications.i will get a cf landing gear and tail.also a cf wing tube and spinner.1 servo on rudder,no power boxes and no reg,only 1 for ignition.for rx 2 li-ion straight to rx.trying to save weight.no smoke,nothing.let me fly it like this for the show if it will be ready than we see or i get something bigger.but over all,does it handel 3d?
great pics there,if you have more just post :P

[typer]

Thank you!

I hope it will be a fine 3D, with one condition: weight between 7.9-8.5 Kg maximum.
I will come with new pictures soon I will finish the plane, lets hope no more than one week.

See you

[typer]

Also Im using 1300mAh(60g) Lipo for ignition and 2x1800mAh Lipos (180g) for receiver.
I use an Emcotec(90g). Im not a huge german fan , but thats ok for me.
A total of 350g, not bad .

Also I have CF spinner, but Im not so lucky with the tube. So good job with the tube! Its great you have one of CF .

[hannustar]

thanks,i think yes,i will be successful in getting between that waitbut never no.

i will put:
2x 42% Products- 6.6v LiPhos 1400mah
1x Duralite- 2150mah,Lithium-Ion 7.4v
1x Duralite- Regulator 7.5 amp to 5.6 volt, Duralite

[typer]

Id like to warn you 7.5Amps they are not enough for this plane(2.2m). Usually servos spikes are sometimes around 8Amps, so use something which can handle maximum of 20A-30A to be in the safe zone.

[hannustar]

you gut me wrong.that reg is for the ignition.for the servos i will connect the batt pack's directly to the rx

[typer]

Sorry, Ok. :P

[hannustar]

hehe.but thanks for taking care .what is the best prop for the dle 55 beacuse i will run the same engine.I ordered a 22x8 from hobbyking for running in and a vess 23-B for flying.

[typer]

O yes, VESS its the best choise, some guys around use this prop. But for the moment my choise was 23x8METTS 3D.

[hannustar]

hehe, thanks for the advice.im getting a prop cover for it, don't want it to get messy haha.also going to get a fromeco Wolverine Switch for rx.handel 2 batt's in one.to tell you the truth this is my first gasser so i am a bit confused for what to chose hehe.i think i'm gong for some good choices.

[typer]

Thank you also. Im sure your plane will be a nice one. I wish you just nice landings with your first gasser . I will come this week with updates :P.

[hannustar]

hehe,i hope so and you 2.thanks for pics,i will post mine as soon my first package arrives,that means hardware and some other parts.still didn't order landing gear a more as TBM doesn't have got all i need .so i think your gonna change the color scheme of you yak?

[typer]

O Yess!!!!! Thank you for asking because I forgot ... Its a surprise. I will repaint also the cover.

Ok ... will be orange with white and black :P.

[hannustar]

hehe,that will be nice once i saw an extra like that,it was awesome.hope you will finish it soon.i what to see how it comes