 |
 |
 |
|
|
|
|
| ||||||
|
|
|
 |
||||
|
|
|
||||
| Welcome to The FlyingGiants Community! We're all about fun, and inside you'll find the greatest, friendliest, and most helpful group of people around! If this is your first time visiting, please check out site, and click here to sign up! We hope to see you soon!! |
|
|||||||
07-25-2009, 11:47 PM
|
#1 |
|
Fly it like you hate it
 
Join Date: Jun 2009
Location: Kingman AZ
Posts: 47
|
New 3DHS extra SHP!!!!!!!
The new 3DHS extra is here!!!! Anybody fly this beast yet. The video on their site is bard arrs
 Does the 50cc really pull it that good on a stock setup, personally I thought it was pretty amazing. Lets hear some comments. Anything really.I WANT ONE!!! ------------------- Fly it like you hate it !!! |
|
|
|
07-25-2009, 11:48 PM
|
#2 |
|
Fly it like you hate it
Join Date: Jun 2009
Location: Kingman AZ
Posts: 47
|
Re: New 3DHS extra SHP!!!!!!!
Forgot the email notification
|
|
|
|
|
07-25-2009, 11:53 PM
|
#3 |
|
Bad-ass Super Contributer!
 
Join Date: Jan 2006
Location: Wesley Chapel, NC, USA
Posts: 435
|
Re: New 3DHS extra SHP!!!!!!!
uh...the plane has been out for a year. Click this link for a longgggggggg thread on it. All the comments you want. It's a terrific plane.
http://www.flyinggiants.com/forums/f...a-300-shp.html
__________________
Lee |
|
|
|
|
07-25-2009, 11:57 PM
|
#4 |
|
Fly it like you hate it
Join Date: Jun 2009
Location: Kingman AZ
Posts: 47
|
Re: New 3DHS extra SHP!!!!!!!
Why is it listed as new on the web site?
|
|
|
|
|
07-26-2009, 12:06 AM
|
#5 |
|
Fly it like you hate it
Join Date: Jun 2009
Location: Kingman AZ
Posts: 47
|
Re: New 3DHS extra SHP!!!!!!!
I'm a little behind
|
|
|
|
|
07-26-2009, 12:18 AM
|
#6 |
|
Thanks for the Support!
 
Join Date: Jan 2006
Location: USA, OH, Aurora
Age: 40
Posts: 22,067
|
Re: New 3DHS extra SHP!!!!!!!
The 103" is new.
The 87" has been out for a while and is WAY bad ass, and the 103" promises to be even better. I have both. I have 100+ flights on my 87", and I'm just building the 103". Great plane!
__________________
Get the most current up-to-date R/C modeling news: www.flyinggiants.com www.rcgroups.com www.crackroll.com www.rccars.com
|
|
|
|
|
09-06-2009, 02:22 PM
|
#7 |
|
Flys Extra's
 
Join Date: Jan 2006
Location: Danville, IN USA
Age: 51
Posts: 7
|
Re: New 3DHS extra SHP!!!!!!!
SleepyC,
Just finished my 103" Extra 330SC. DA 100 with battery packs at the back of the radio compartment and rudder servos in tail. My CG is towards the aft side of the wing tube. I thought Ben told me the CG should be 140 - 145 mm (approximately 5.5") back from the wing tips. If so, mine comes out 1 - 1 1/2 ahead of that. How did yours balance and have you flown it yet? Regards, |
|
|
|
|
09-06-2009, 04:22 PM
|
#8 |
|
Closet Jesus Freak
Join Date: Jan 2006
Location: San Antonio, TX
Posts: 3,209
|
Re: New 3DHS extra SHP!!!!!!!
From the way you put your components, it sounds like it should balance fine. Can you show us a picture of your install?
Also, are you measuring it at the root or at the tip? |
|
|
|
09-06-2009, 08:27 PM
|
#9 |
|
Flys Extra's
Join Date: Jan 2006
Location: Danville, IN USA
Age: 51
Posts: 7
|
Re: New 3DHS extra SHP!!!!!!!
Gentleman,
Below is a couple of pics. I was measuring on the wing tip as I thought that was where Ben said to measure. However, it does balance about 2/3 of the way back on the wing tube. I have 6 other Extras of various sizes and nearly all balance on the wing tube. Weather was not favorable here today and rain for tomorrow. I can hardly wait to fly it after reading all the good stuff about it. Thanks, Blue Skies & Fair Winds, |
|
|
|
|
09-06-2009, 08:29 PM
|
#10 |
|
Flys Extra's
Join Date: Jan 2006
Location: Danville, IN USA
Age: 51
Posts: 7
|
Re: New 3DHS extra SHP!!!!!!!
Installation photo
|
|
|
|
|
09-06-2009, 08:36 PM
|
#11 |
|
Go Bucks!!!
Join Date: Jan 2006
Location: Swanton, OH USA
Age: 38
Posts: 1,545
|
Re: New 3DHS extra SHP!!!!!!!
With your rudder servos mounted in the tail and running stock mufflers (no cans) I would plan on actually moving your rx packs further forward on the rudder/rx tray.
I'm flying my 103" Extra with a DA-100 on MTW 75 TD cans and rudder servos in the tail and I have my rx/rx packs/regs mounted as far aft on the rudder/rx tray as possible. I have found that if you can get a CG of around 143mm measured at the wing tip from the leading edge the plane will fly nearly hands off inverted. Tim
__________________
TNT Landing Gear Want to become a better pilot? Click Here!! - I never fly alone. My co-pilot is always with me 
|
|
|
|
 |
 |
 |
 |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 3D Hobby Shop 87" 50cc Extra SHP | sukhoi26mx | Build Threads | 546 | 02-06-2012 09:44 AM |
| 3D Hobby Shop 87" 50cc Extra SHP SHIPPING! | SleepyC | Leading Edge Homepage Article Discussions | 346 | 04-02-2010 01:30 AM |
| e-flite extra 260 or 3DHS edge 540 | B_wilsonUSAF | General Discussion - Electrics | 8 | 11-17-2008 08:21 AM |
| 3D Hobby Shop 47" Extra 300 SHP | sun.flyer | General Discussion - Electrics | 12 | 04-08-2007 11:02 AM |
