Ultra Light 55% Extra 260

[BigBird]

	Quote: Originally Posted by sensei
	Here is a little more work done. Bob

Bob,
Where did you get the CNC bottle cap? Do you still have to glue them on or does it have an o-ring seal?
Thanks,
Jason

[khedge]

	Quote: Originally Posted by sensei
	I am thinking about 2 or 3 weeks

Cool sounds good, what is the proper way to build an air scoop to pull air out of fuse for my pipes. I was just think of making a small box around were the pipes exit. Man that DA-200 looks small in that huge cowl of your 260

[sensei]

	Quote: Originally Posted by BigBird
	Bob, Where did you get the CNC bottle cap? Do you still have to glue them on or does it have an o-ring seal? Thanks, Jason

They come out of Germany for I think around $25.00. They have an o-ring inside of them, so you do not need to glue them, but you can.

Bob

[Mr.E]

Bob, this thing is looking more and more like one hell of an airplane! Keep up the good work, and make sure you make Mike do some sweeping of all that sawdust, maybe with an apron on too..

I am ready to get down there and hang with you boys and make one hell of a killer video for you! New Comp, Check.. New Video Software, Check... Bad ass song, Check.... Video of Bob wringing this tubby bastad out, pending...

Russ

[sensei]

	Quote: Originally Posted by khedge
	Cool sounds good, what is the proper way to build an air scoop to pull air out of fuse for my pipes. I was just think of making a small box around were the pipes exit. Man that DA-200 looks small in that huge cowl of your 260

Place a lip at the front of the exaust opening, it will work like a cowl flap and exccelerate the air as it moves over the lip causing the air to be scavenged from thr fuse.

Bob

[sensei]

	Quote: Originally Posted by Mr.E
	Bob, this thing is looking more and more like one hell of an airplane! Keep up the good work, and make sure you make Mike do some sweeping of all that sawdust, maybe with an apron on too.. I am ready to get down there and hang with you boys and make one hell of a killer video for you! New Comp, Check.. New Video Software, Check... Bad ass song, Check.... Video of Bob wringing this tubby bastad out, pending... Russ

Thanks buddy, and I look forward to seeing you again.

Bob

[Tex]

	Quote: Originally Posted by sensei
	air to be scavenged from thr fuse. Bob

What dictionary did that come from.......... (scavenged)

[bzrogers]

Bob,

Your plane ugly naked. Get back to work and give me something cool to look at!

[BigBird]

	Quote: Originally Posted by sensei
	They come out of Germany for I think around $25.00. They have an o-ring inside of them, so you do not need to glue them, but you can. Bob

Well I googled Germany and found nothing but pictures of Hitler and Blonde chicks that could cause a car wreck walking down the road.
Do you know the name of the company? Where can a person buy them?

[gapple12]

	Quote: Originally Posted by BigBird
	Well I googled Germany and found nothing but pictures of Hitler and Blonde chicks that could cause a car wreck walking down the road. Do you know the name of the company? Where can a person buy them?

Here is what I have found Jason....hope you know German

http://richter-lackierung.de/aktuali...dellflug.htm#h

[khedge]

	Quote: Originally Posted by sensei
	Place a lip at the front of the exaust opening, it will work like a cowl flap and exccelerate the air as it moves over the lip causing the air to be scavenged from thr fuse. Bob

Thanks Bob. The plane is looking good

[bzrogers]

	Quote: Originally Posted by BigBird
	Well I googled Germany and found nothing but pictures of Hitler and Blonde chicks that could cause a car wreck walking down the road. Do you know the name of the company? Where can a person buy them?

Together or seperate? I thought Hitler's girlfriend was a brunnette?

[Cracky]

	Quote: Originally Posted by BigBird
	Well I googled Germany and found nothing but pictures of Hitler and Blonde chicks that could cause a car wreck walking down the road. Do you know the name of the company? Where can a person buy them?

Give Trent a call. I think a while back he had a couple of caps that he was getting rid of. Not sure the size, but they might be the ones you are looking for if he still has them.

[Bam Bam]

	Quote: Originally Posted by sensei
	Like Dean told me the first time I used 30-NF, play around with it on some scrap foam and balsa, and you will see how it handles prior to using it on a flight surface. Bob

Thanks for that Bob!
The part that i really cant get my head around though, is that if the bond is instant as soon as you touch the two surfaces together, what's the point of bagging it or putting it under weights?
What happens if there is an air bubble stuck in there when you lay down the sheeting?
Sorry for these anoying questions, but that glue is hard to get here and expensive, so before i get something like that, i just wanna understand it in our application.

[sensei]

	Quote: Originally Posted by BigBird
	Well I googled Germany and found nothing but pictures of Hitler and Blonde chicks that could cause a car wreck walking down the road. Do you know the name of the company? Where can a person buy them?

I bought mine from Jack at the hobby shop, he knows how to get them buddy. just PM him.

http://www.flyinggiants.com/forums/members/wb5ziy.html

Bob