Ultra Light 55% Extra 260

[TX Newbee]

	Quote: Originally Posted by BoneDoc
	Maybe a 5x10 V nose with the spinner and rudder off?

V nose for sure gives you 18" to 24" depending on manuf.

I'm going to think positive. Don't really want to have to buy a new custom trailer to fit in my garage that will hold her.

We'll see once it is all done the prop to Vertical measurement and see if it will work.

[smokin]

damon.... call me on the aerotech line in the morning tomorrow....563-321-8757. i haven't forgotten for you man! it's just been a crazy busy time for us!

i look forward to hearing from you.

matt

[TX Newbee]

	Quote: Originally Posted by smokin
	damon.... call me on the aerotech line in the morning tomorrow....563-321-8757. i haven't forgotten for you man! it's just been a crazy busy time for us! i look forward to hearing from you. matt

No worries,
I'll catch you tomorrow.

[sensei]

	Quote: Originally Posted by TX Newbee
	Great news about the trailer I was just starting to trailer shop. I'm so glad to hear it will fit! This plane gets better and better! I love the Biela 26X12 on my 100cc Edge and thought that is what you were running on the 100cc. Any thoughts on 33X12 vs the 30X13 or even the Biela 30X14? http://www.aircraftinternational.com...elaCarbon.aspx

I have never tried a Biela, 33X12, 30X13 or the 30X14, so I would not be a good source of information on these items, but I would like to hear from those who have used them.

Bob

[MikeC3D]

[quote=TX Newbee;935748]Great news about the trailer I was just starting to trailer shop. I'm so glad to hear it will fit! This plane gets better and better!


Just a hint, but I was looking at trailers awhile back, and if you dont mind driving to Georgia....you can buy factory direct and save BIG $$$. I was about to pull the trigger on a 28' with just a few options for $4500.00. nothing super fancy, just light ply on the inside, but for me its comes natural to finish it out with eminities. 16-20 footers for $2500-4000 all day long. just google factory direct trailers....

[Craven]

Good info Mike. They also make a ton of trailers in Elkhart , Indiana and you can get some really good deals if you're willing to drive there and pick one up. I just don't think there is any way that a 10' trailer will suffice to carry this plane.

[jonathanmanopla]

WHEN THE PLANE ITS GOIN TO FLY, I WANT TO SEE

[GMoney]

	Quote: Originally Posted by jonathanmanopla
	WHEN THE PLANE ITS GOIN TO FLY, I WANT TO SEE

Do you mind ALOT of people around for the maiden? I live close enough to make a day trip out of it. maybe even do some flying (with my traditional heavy planes). Maybe I could just bring out the camera's?

[jonathanmanopla]

pleasee because i live in panama city , but i continious saw this thread

[ddlstang]

sounds like you need to have Giants live feed of the maiden, no preassure there.

[gapple12]

Im sure everyone and there mother will be there. I believe Bob plans on doing his maiden flight in Kingsbury Texas at the Tri-City Flyers club.

[TX Newbee]

	Quote: Originally Posted by sensei
	I have never tried a Biela, 33X12, 30X13 or the 30X14, so I would not be a good source of information on these items, but I would like to hear from those who have used them. Bob

I just ordered a 33X12 so I'll bring it down next time you're flying and we can test it out.

[quote=MikeC3D;935970]

	Quote: Originally Posted by TX Newbee
	Great news about the trailer I was just starting to trailer shop. I'm so glad to hear it will fit! This plane gets better and better! Just a hint, but I was looking at trailers awhile back, and if you dont mind driving to Georgia....you can buy factory direct and save BIG $$$. I was about to pull the trigger on a 28' with just a few options for $4500.00. nothing super fancy, just light ply on the inside, but for me its comes natural to finish it out with eminities. 16-20 footers for $2500-4000 all day long. just google factory direct trailers....

Awesome thanks. The challenge is I have to be able to fit it in my garage so it has to be built low. Silly HOA rules. I found some good deals on a 12ft. V nose custom built, I just don't want to have to switch trailers if I don't have to I love my current set up. I'll check your sources too thanks.

	Quote: Originally Posted by Craven
	Good info Mike. They also make a ton of trailers in Elkhart , Indiana and you can get some really good deals if you're willing to drive there and pick one up. I just don't think there is any way that a 10' trailer will suffice to carry this plane.

Craven,
I don't think it will fit but as I said will remain optimistic about it. Time will tell. I'll check into Indiana as well. I know Waymatic is there and have purchased some trailers from them in the past for a previous business. Thanks for the feedback!

[sensei]

	Quote: Originally Posted by GMoney
	Do you mind ALOT of people around for the maiden? I live close enough to make a day trip out of it. maybe even do some flying (with my traditional heavy planes). Maybe I could just bring out the camera's?

I don't mind who is there at all, so come on...

Bob

[Craven]

I'll bring the strippers...........

[ddlstang]

	Quote: Originally Posted by Craven
	I'll bring the strippers...........

Now that would be worth a 10 hour drive.