9c HELP! trying to program ailerons with the elevator for walls and elevators

[jacksons air]

I'm trying to program the ailerons to operate with the elevators in the up position with a switch to perform walls or elevators and no success my set up is using ch1 and ch7 for ailerons and ch2 and ch8 for the elevators ive tryed programming it but cannt get both to deflect in the up position they oppose each other? Any help would be appreciated!!

[3D-Seth]

I don't use spoilerons. Much easier for me to just do it with elevator only. Much more aileron authority this way too.

Seth

[3Dguy]

	Quote: Originally Posted by jacksons air
	I'm trying to program the ailerons to operate with the elevators in the up position with a switch to perform walls or elevators and no success my set up is using ch1 and ch7 for ailerons and ch2 and ch8 for the elevators ive tryed programming it but cannt get both to deflect in the up position they oppose each other? Any help would be appreciated!!

I did it, but I forgot how...If someone doesn't chime in, I'll check what I did, but I agree with Seth...elevators only.

[Woodie]

	Quote: Originally Posted by jacksons air
	I'm trying to program the ailerons to operate with the elevators in the up position with a switch to perform walls or elevators and no success my set up is using ch1 and ch7 for ailerons and ch2 and ch8 for the elevators ive tryed programming it but cannt get both to deflect in the up position they oppose each other? Any help would be appreciated!!

I can't remember if the 9C has the 'airbrake' function, but the newer Futabas do. I think that will do what you want. Hit the airbrake switch, both ailerons move up a programmed distance but still retain the aileron function.

Woodie

[FranciscoOrtiz]

You can do it.
Set the ailerons on channels 1 and 6, elevator on 2 and 8, if you have your aileron servos in 1 and 7 you have ail dif on, just set flaperons and your ailerons will work as flaps too, set your flap-elevator mix on and elevator-flap too. then you can tune the movement you need, just remeber when elevator goes up, flaperons go down.
You could use the airbrake function too but if I´m not wrong it sets flaps to preprogramed possition and it isn´t proportional to elevator movement