Scandalous Pattern plane build

[toddblose]

Ok, Biff asked me to do a build thread a while back so here goes.
The plane is the Scandalous from Chip Hyde.com and yes it's
a biplane. This is the updated version that Chip flew last year
at the AMA Nat's and the World's. The plane is a piece of work.
When I opened the box I was blown away by the quality of work
that is being done. The plane will take around a week to get together and
it could go quicker if you have the time. The plane comes painted, covered
and ready to be hinged. The fuse is paint with a clear coat. The wings, stabs
and rudder are covered in ultracoat. I will answer any questions that I can,
if not I will try and get the answer for you.

Here are 2 of the Scandalous bip's The pink one belongs
to B.W. Ponder and mine is the red one

[toddblose]

I used Sig Easy hinges on all surfaces and have the servos mounted.
The Scandalous comes with the servos cut out in the wings. I used the Futaba
9650 servos because the are a perfict fit. The aileron cut outs have already been boxed in so all that needs to be done is add 1/4in servo rails and hook up the
ailerons. I use the carbon rod with 2-56 allthread and Chip Hyde control horns

[toddblose]

There are 2 ways to do the elevator servos. If you go with a glow motor then
you can use the carbon rod system from Central Hobbies. I needed to try and save weight since I will be running the Hacker motors so I chose to put the Futaba 3150's in the stabs. I was able to cut and box in the stab with 1/16 balsa. Then added the hard wood to mount the servo.

[JeremyHolt]

That is a great looking bird, I know its going to fly great.

[toddblose]

Thanks, I wish I could take credit for it but That the way it
looks out of the box. I know it will fly Great

[Biff]

Nice work Todd!! You going electric or four banger? SWEET!!!!

[Boogie]

	Quote: Originally Posted by toddblose
	I needed to try and save weight since I will be running the Hacker motors

[yooki]

Is it going to be ready for the jetero contest Todd? Can't wait to see it. Looks great.

Do you think you're going to be able to get by with 9650's in the wings and 3150's in the tail? I know you're trying to save weight, but there has to be a better way to do it besides downgrading your servos.

[toddblose]

Brett,
I ran the 9650's all last year and B.W. ran the 3150's on his elevators
with no problem.

[snaprollsoda]

are these available is there a web site?

[Cracky]

	Quote: Originally Posted by toddblose
	. The plane is the Scandalous from Chip Hyde.com

http://www.chiphyde.com/html/aircraft/scandalous.html

[Edge 540]

.

[Luizinho]

Hello. I Am Luiz from www.netboxhobby.com In few days is arriving the Scandalous plane. Please vist the web page for more information.

[toddblose]

Luiz,
Keep me posted when they get here I still have people interested in the Scandalous and the Genesis. Also let me know if you have any Scandalous kits. There are a couple of people on my aera the want the kit.

[TeamFlyer]

Hi, Ya

I am proud to say I finished my Scandalous Bipe. I ended up retiering my genesis because it was having too many problems.



My Setup:
Axi 5330/18 with apc 21 x14
JR 8411 all around
Jr 9x v2
JR 770S
Thunder Power 10s 3p 5000