Spektrum AR7000 Beware!

[jaggededge]

	Quote: Originally Posted by jamesrxx951
	if it were me and i do have a 30%er, get rid of the nimh batteries and the bat share. just get the a123's like you said into a fromeco wolverine switch{prefered} into 2 ports into the receiver. you will have to "Y" one power wire into a servo wire. either rudder or throttle would be my suggestion.

After reading on here for a while that is what seems to be the simplest and most efficient way.
I went that route on mine. With the Wolverine switch you're load balanced so 2 1100 a123's will have the same capacity as 1 2200 a123 at the expense of current capacity. On top of all that its redundant so you end up with a very safe and light system that provides plenty of current for a 30% plane.

1100mah A123: 95g x 2 = 190g/33A cont.
Wolverine: 17grams
Total: 207g.

2200mah A123: 190g/66A cont.