Restoring a 3DHS 87" SHP

Home

My FlyingGiants

Blogs

Classifieds

FORUMS

Members

News

Search

Find New Posts

All Forums

Subscribed Forums

View Unanswered Threads

Search Forums

Show Posts Show Threads

Advanced Search

Tools

Post Hucker

Mark Forums Read

Sign Up!

almmendes · 11-09-2009, 11:56 AM

Well, I might be crazy but I always loves this 3DHS 87" SHP airframe and I was able to put my hands in one, but needing fixing. For those that know me I like things well assembled and if possible better than new, so there's major intervention needed on this model as well.

You can find this amazing model created by 3DHS and Scott Stoops (great guy and great pilot) at http://www.3dhobbyshop.com/detail.aspx?ID=2280

We have holes on the wings, not just converging issues but broken wood, nothing major like ribs or spars. We do have a dent on the leading edge but it will be fixable too.

The fuse needs a major overhaul...

The landing gear area needs to be re-engineered. Covering will be done in a lot of areas mainly on the bottom of the fuse.

This aircraft was running on gas, then electric and now I'm planning on going back to gas.

My major issue so far is some hinges slightly loose. 1mm play... I do want to make sure I won't have problems in flight so I'll have to come up with something to solve this problem. Still studying that approach... ideas welcome

I'll start posting pics of progress, ideas and comments. Please let us keep this post without any personal offenses to airplane brands or people.

First picture shows two color versions and my buddy Cory holding them. He owns the white version and my version is the red one (not that one). Next pictures showing the bottom are after I cut and removes covering off. I wanted to take a look and be able to work in it as needed.

Thank you for looking and for your support.

GO Flying Giants

edg · 11-09-2009, 12:34 PM

Hey Antonio......Looks like a good project for the winter months. I'll be happy to take a look at the fuse damage so that parts can be made. From the pics the damage doesn't look too bad but......

Let me know

Ed

almmendes · 11-09-2009, 01:10 PM

Update...

Holes on the wings got covered with new wood and now just missing sanding and covering on the bottom. On the top I removed traces of old covering that was ripping of and one of the wings till needing leading edge work. To come...

I'll send new pics on the fuse update later.

Ed, thank you so much but Norman is already working on that. If I end up needing any help you'll be the man. Thanks

RC-3D · 11-09-2009, 01:40 PM

I hope you get your SHP back together soon. This is one of my favorite 50cc airframe.

Tom

edg · 11-09-2009, 04:12 PM

Looks like you are well on your way.......Let me know if you need anything.

Ed

AllBread · 11-09-2009, 07:20 PM

Looks good Antonio - glad to see this thing getting the TLC that it needs, it went to a good home! Sure enough, as soon as I walked back inside after you left I found 2 wing bolts. I'll get them to you soon.

Ryan

grimgrinnin · 11-09-2009, 07:43 PM

Ummm, what did you do Ryan?????

AllBread · 11-09-2009, 09:13 PM

	Quote: Originally Posted by grimgrinnin
	Ummm, what did you do Ryan?????

Oh, you know, bought it flew the heck out of it, ripped the gear off a few times, hit a fence or two and then decided it was time for a 100cc so I sold it to someone who could actually restore it to it's former glory and get a whole 'nother life out of it. Win/Win for everyone, I think!

almmendes · 11-09-2009, 09:35 PM

	Quote: Originally Posted by AllBread
	Oh, you know, bought it flew the heck out of it, ripped the gear off a few times, hit a fence or two and then decided it was time for a 100cc so I sold it to someone who could actually restore it to it's former glory and get a whole 'nother life out of it. Win/Win for everyone, I think!

Yeah, win/win... however I'm not sure I'll let you fly it again after restored

Just kidding... Ah, ah, ah...

Aren't you coming for the electric fly-in next weekend, if the weather allows?? If so, please bring me those wing screws and if you remember that broken model. Let me know if you want me to pick it up because I'll be in Boulder next Wednesday afternoon. I'll fix it and then help people with the buddy box for 3D begginers.

Thanks Ryan

sukhoi26mx · 11-09-2009, 10:16 PM

	Quote: Originally Posted by grimgrinnin
	Ummm, what did you do Ryan?????

Glad to see that it went to a good home. Ryan, I think, fully intended to kill it off eventually

Antonio - looks like fun! Congrats!

Scott

almmendes · 11-10-2009, 08:05 AM

Update...

Here's how he fuse is going. The lower plate will have some holes but you can get the idea.

Great job Norman. Can't wait until I get more pictures from you...

RC4x4 · 11-10-2009, 01:12 PM

Looking good buddie!! It already looks better. I would love to come check it out after the Leaf fun fly. You'll have that guy looking great before you know it.
Let me know if you need anything.

Great Job!!

Cory

almmendes · 11-10-2009, 10:06 PM

Hey guys,

look at the pictures and see the awesome work Norman did. Amazing... It's really strong. Thank you so much Norman

RC4x4 · 11-10-2009, 11:48 PM

That looks great Antonio. Tell Norman great job. That look really strong and should work great.

Cory

sun.flyer · 11-11-2009, 07:06 AM

Nice work on the repairs!!

Tim

11-09-2009, 11:56 AM	#1
almmendes Antonio Mendes Join Date: May 2006 Location: Longmont, CO Age: 32 Posts: 890	Restoring a 3DHS 87" SHP Well, I might be crazy but I always loves this 3DHS 87" SHP airframe and I was able to put my hands in one, but needing fixing. For those that know me I like things well assembled and if possible better than new, so there's major intervention needed on this model as well. You can find this amazing model created by 3DHS and Scott Stoops (great guy and great pilot) at http://www.3dhobbyshop.com/detail.aspx?ID=2280 We have holes on the wings, not just converging issues but broken wood, nothing major like ribs or spars. We do have a dent on the leading edge but it will be fixable too. The fuse needs a major overhaul... The landing gear area needs to be re-engineered. Covering will be done in a lot of areas mainly on the bottom of the fuse. This aircraft was running on gas, then electric and now I'm planning on going back to gas. My major issue so far is some hinges slightly loose. 1mm play... I do want to make sure I won't have problems in flight so I'll have to come up with something to solve this problem. Still studying that approach... ideas welcome I'll start posting pics of progress, ideas and comments. Please let us keep this post without any personal offenses to airplane brands or people. First picture shows two color versions and my buddy Cory holding them. He owns the white version and my version is the red one (not that one). Next pictures showing the bottom are after I cut and removes covering off. I wanted to take a look and be able to work in it as needed. Thank you for looking and for your support. GO Flying Giants Attached Thumbnails 73.9 KB · Views: 101 73.3 KB · Views: 151 76.5 KB · Views: 112 68.7 KB · Views: 106 84.9 KB · Views: 95 65.8 KB · Views: 89 81.7 KB · Views: 50 85.6 KB · Views: 38 78.9 KB · Views: 42 62.9 KB · Views: 49 81.3 KB · Views: 40 83.4 KB · Views: 43 88.2 KB · Views: 35 66.4 KB · Views: 47 88.2 KB · Views: 49 __________________ Antonio Mendes http://www.milehighrc.com/

11-09-2009, 12:34 PM	#2
edg Flyin' Around Join Date: Sep 2009 Location: Longmont, CO Posts: 2	Re: Restoring a 3DHS 87" SHP Hey Antonio......Looks like a good project for the winter months. I'll be happy to take a look at the fuse damage so that parts can be made. From the pics the damage doesn't look too bad but...... Let me know Ed

11-09-2009, 01:10 PM	#3
almmendes Antonio Mendes Join Date: May 2006 Location: Longmont, CO Age: 32 Posts: 890	Re: Restoring a 3DHS 87" SHP Update... Holes on the wings got covered with new wood and now just missing sanding and covering on the bottom. On the top I removed traces of old covering that was ripping of and one of the wings till needing leading edge work. To come... I'll send new pics on the fuse update later. Ed, thank you so much but Norman is already working on that. If I end up needing any help you'll be the man. Thanks Attached Thumbnails 47.0 KB · Views: 66 37.8 KB · Views: 58 36.1 KB · Views: 46 __________________ Antonio Mendes http://www.milehighrc.com/

11-09-2009, 01:40 PM	#4
RC-3D Flyin' Around Join Date: Mar 2006 Location: Arlington, Tx Posts: 10	Re: Restoring a 3DHS 87" SHP I hope you get your SHP back together soon. This is one of my favorite 50cc airframe. Tom

11-09-2009, 04:12 PM	#5
edg Flyin' Around Join Date: Sep 2009 Location: Longmont, CO Posts: 2	Re: Restoring a 3DHS 87" SHP Looks like you are well on your way.......Let me know if you need anything. Ed

11-09-2009, 07:20 PM	#6
AllBread Bad-ass Super Contributer! Join Date: Dec 2007 Posts: 262	Re: Restoring a 3DHS 87" SHP Looks good Antonio - glad to see this thing getting the TLC that it needs, it went to a good home! Sure enough, as soon as I walked back inside after you left I found 2 wing bolts. I'll get them to you soon. Ryan

11-09-2009, 07:43 PM	#7
grimgrinnin Mmmmm, cake! Join Date: Dec 2007 Location: Surprise, AZ Posts: 40	Re: Restoring a 3DHS 87" SHP Ummm, what did you do Ryan?????

11-10-2009, 08:05 AM	#11
almmendes Antonio Mendes Join Date: May 2006 Location: Longmont, CO Age: 32 Posts: 890	Re: Restoring a 3DHS 87" SHP Update... Here's how he fuse is going. The lower plate will have some holes but you can get the idea. Great job Norman. Can't wait until I get more pictures from you... Attached Thumbnails 92.0 KB · Views: 109 69.1 KB · Views: 68 81.9 KB · Views: 100 59.3 KB · Views: 82 49.0 KB · Views: 95 __________________ Antonio Mendes http://www.milehighrc.com/ Last edited by almmendes; 11-10-2009 at 04:54 PM.

11-10-2009, 01:12 PM	#12
RC4x4 Bad-ass Super Contributer! Join Date: Sep 2007 Location: THORNTON, COLORADO Posts: 318	Re: Restoring a 3DHS 87" SHP Looking good buddie!! It already looks better. I would love to come check it out after the Leaf fun fly. You'll have that guy looking great before you know it. Let me know if you need anything. Great Job!! Cory

11-10-2009, 10:06 PM	#13
almmendes Antonio Mendes Join Date: May 2006 Location: Longmont, CO Age: 32 Posts: 890	Re: Restoring a 3DHS 87" SHP Hey guys, look at the pictures and see the awesome work Norman did. Amazing... It's really strong. Thank you so much Norman Attached Thumbnails 63.9 KB · Views: 110 70.8 KB · Views: 111 __________________ Antonio Mendes http://www.milehighrc.com/

11-10-2009, 11:48 PM	#14
RC4x4 Bad-ass Super Contributer! Join Date: Sep 2007 Location: THORNTON, COLORADO Posts: 318	Re: Restoring a 3DHS 87" SHP That looks great Antonio. Tell Norman great job. That look really strong and should work great. Cory

11-11-2009, 07:06 AM	#15
sun.flyer Go Bucks!!! Join Date: Jan 2006 Location: Swanton, OH USA Age: 38 Posts: 1,545	Re: Restoring a 3DHS 87" SHP Nice work on the repairs!! Tim __________________ TNT Landing Gear Want to become a better pilot? Click Here!! - I never fly alone. My co-pilot is always with me

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3DHS 51" slick or 3DHS 57" extra 330sc?	sprice50	General Discussion - Electrics	27	08-26-2010 04:35 PM
3DHS 51" AJ Slick vs. EF 48"Extra 300 EXP...	SportFlyer	General Discussion - Electrics	27	02-28-2010 10:00 AM
New 3DHS extra SHP!!!!!!!	Gonzoman	Airframes and Kits	10	09-06-2009 08:36 PM
3DHS Killer 87" Extra SHP	Radioactive	Build Threads - Electrics	66	08-25-2009 03:08 AM
3DHS 55" EXTRA SHP MAIDEN!	Radioactive	Build Threads - Electrics	20	02-08-2008 06:51 AM