Ultimate Biplane 33% ( 100cc ) from world models

[wifpwcf]

i got mine today & its a 3w 106cs going in it with emcotec tg servos,how do i put pics up it aint the same as before

[RustyTumbles]

Click post reply, and then on the paper clip at the top of the reply box. Select image and type reply and then click submit.

[SUPER STRICK]

rusty- do you know how to keep the flying wires tight on the 33 % world models.

[RustyTumbles]

	Quote: Originally Posted by SUPER STRICK
	rusty- do you know how to keep the flying wires tight on the 33 % world models.

No sorry dude. I would imagine you need a turnbuckle of some discription.

[hugo111]

Tried a ship's chandlery ??? they have very fine steel wire, crimping tools and quick snap SS fittings.... that's where I'll go when I get to that.

[hady]

hi guys i have found a great modification for my ultimate 33% regarding the turnbuckles from unscrewing. great idea takes 1h to do but save precious hours from now on. instead of screwing 8 small and delicate turnbuckles that become loose , i have found a way to keep them screwed and fixed with cyano all i have to do is to unscrew or unscrew 4 screws. it only takes a minutes to get my plane ready. here are some pictures of what i did. PS sorry for the quality of the pictures they are very bad i will try to make new one on the weekend and post them again, but you can see and understand the modification i did.
waiting for your comments i am soo proud of myself
cheers

[khan]

That is a great idea! Will do that with my 33% WM Ultimate. By the way, I have all hitec 5955 servos on mine with a smartfly power distribution module and two LiIon Bats. On the nose there is a 100 DA (of course). Great flying plane.

[hady]

i didn't really try it to the extreme i only did 3 flights. still tuning but it seems very easy and very good plane. although i did this modification i think i am gona fly it more often its soo easy now.
yes its heavy tale i had to put all 3 battery's NIMH on the front. i am using 8 servos 8511 and i also did another modification which is the rudder servo i put them in the fuselage with floating bell crank.

[SUPER STRICK]

show us the end of the wires at the wings also. that is neat will do mine like that when i see your other pics.

[SUPER STRICK]

please send us more pics of the wires. thats neat. mine is coming in at 29 lbs. does that seem heavy?

[hady]

hi super stick. the wing end is the same as it comes in the box the only thing i did is that when you modify and you tune the cords. all you have to do is to put cyano on the turnbuckles in order to fix them once for all.
if you need to take them off all you have to do is to loosen the screw on the modification you made and the wire will come lose .

[hady]

u still in the norm for 3D still good.
here are some pics but i will try to take some pics when the plane will be all joined together on the week end i will post them on Monday and here is a tip for





not loosing the screws anymore

[khan]

I put the 2 rudder servos in the tail and moved the engine about 1/4 of an inch forward with spacers. This helps qith the balance without the need of any pull-pull extra hardware. It can do square knife edge loops. Still tunning.

[wifpwcf]

hi guys a few pics of mine its the only yellow 33% ulti in australia.3w106cs,i cant wait to stack the 2 small ones ontop.then my 42% under them

[francis l m]

Hi Guys

Can some one tell me where is the exact position to measure the CG
On the 33% Worldmodels Ultimate.

Thanks
Francis