ConRadical's getting a new 150CC Plane... YOU PICK IT!

[ConRadical]

Ok guys, this is thread 1 of 3, getting a new plane. The plane is going to be completely chosen by what the FG community wants -- of course it's going to be pimped with FG swap all over it!
Background..
I'm getting a new plane setup completely, you guys get to chose EVERYTHING except you can't choose is the RX, it's going to be the Weatronics fully decked out with the GPS.. etc
see: http://www.flyinggiants.com/forums/s...ead.php?t=6058

I'm getting everything new so start posting your thoughts, starting with the airframe down to the control horns. Once there are a bunch of post i'll start sorting through everything and make a poll where every member can then vote. (Thread # 2 of 3)

Of course, after the polls done and i'll be the final Thread, 3 of 3.

Get on it boys! Keep it clean and the vendor bashing out!

~ConRadical

[SleepyC]

145" Clipped wing CUB.

Husquarvarna quadra 150 with spring starter,
Classic Futaba Gold top 8 channel radio (no expo)
and some good golden rod to connect all the surfaces.

You would be pimpin!

[ConRadical]

In that case sleep, you can hook me up really cheap.. Do you still have all those parts on your shelf?

[Cracky]

AWESOME...I love spending other peoples money....

First off, about the airframe......Kit or ARF? You willing to build if its a kit????

[plaster93]

So your the guy that hit the Powerball !!!

[ConRadical]

	Quote: Originally Posted by dgfick
	AWESOME...I love spending other peoples money.... First off, about the airframe......Kit or ARF? You willing to build if its a kit????

Hmmm, either is ok though in reality though i'm rather busy. For time sake lets make it am ARF

[ConRadical]

	Quote: Originally Posted by plaster93
	So your the guy that hit the Powerball !!!

No powerball, It's just time.

[Vic3D]

Composite ARF Extra 260, or Dalton 260.

Engine: 3W 157 on pipes.
Servos: 5955 Hitec.
Radio: Futaba
Batteries: 2 4800 and 1 2800 Fromeco, with regs.


Vic

[SleepyC]

Yea man... if your gonna pop the LOOT for a plane, get RUSSo to build you a 260, or the NEW 300!!

[torquen]

Con, save the hassel and just buy this http://www.flyinggiants.com/swapshop...uct=1890&cat=2 Its full ready to go all you have to do is put your weedtronics receiver in the plane and fly!!
Garrett

[zivbit]

QQ Pitts Python for 150cc
3W 157 + KS tuned pipes
3W round fuel tanks + clunk sets - 1 for fuel + 1 for smoke
hitecs 5955 all around
weatronic 10-20 my choice too...
Fromeco batt. packs
DUbro Horns HD
Seiko PS-50 for rudder + separate bat. pack
Adjustable uni-arm for the Seiko servo from airwild
Mejlick 3 blade prop
SWB pull-pull fittings set for rudder
Airwild MLP aluminium servo heads 1.5" single
J'tec clamp locs for neat instalation
Sullivan skywriter for smoke
NOLIMITZ matched spinner + pilot

I am done....

Cheers,
Ziv

[ConRadical]

	Quote: Originally Posted by torquen
	Con, save the hassel and just buy this http://www.flyinggiants.com/swapshop...uct=1890&cat=2 Its full ready to go all you have to do is put your weedtronics receiver in the plane and fly!! Garrett

Garrett, I'd love to have that but that's too much $$$

[ConRadical]

	Quote: Originally Posted by SleepyC
	Yea man... if your gonna pop the LOOT for a plane, get RUSSo to build you a 260, or the NEW 300!!

]

That might be an idea.

[Flyinrazrback]

Krill 39% Katana
3W 157 or ZDZ Super 160
Full Pipes, either K&S or Greves
Hitec 5955s all around
Fromeco peerless 4800s x2
Fromeco 2400 ignition battery

[torquen]

	Quote: Originally Posted by ConRadical
	Garrett, I'd love to have that but that's too much $$$

You will find that your going to end up with the same amount of money in pretty much any top model out there. Comp, Dalton, Carden ect. Only difference is you wont know because every part is being baught at different times. I just built a simple 35% plane for a friend and used all the discounts and everything from Tower on servos ect. Came out to 3,700 bucks! That was the cheapest I could built it for.
Also only a 900 dollar airframe.
Garrett