XTREME COMPOSITE EDGE 540T 2X2

[BaldEagel]

blaiss

There was a single sheet of contents which came with the plane showing the former, also if you go onto the Graupner web site and look for the "WP EDGE F3A 2x2m" there order No 9386 there is a very helpfull manual for building the electric version which you can use as a suppliment too the BVM manual.

If I can dig out the contents sheet I will take a pic and post it here.

Mike

[blaiss]

Thanks. I downloaded the Graupner manual, and I also found it in my manual from BVM with a photo of the former in question on page 15. I spoke with Bob at BVM, and he was unaware of the defect but acknowledged the omission and will be supplying these free of charge to his customers.

[BaldEagel]

One other thing I found was that the rudder control horn and the rudder servo arm are not the same width accross the control link fixing holes, this would introduce slack when operated, this in itself is not a big problem but esthetically its horrid.

Mike

[BaldEagel]

If you guys are interested I have put a dual carbon horn build thread here: http://www.rcuniverse.com/forum/m_7203928/tm.htm

Mike

[BaldEagel]

Finally installed the virtual cockpit, the extended front dash hides the high mounted tank necessary because I used a cannister exhaust.

Mike

[2x2Boy]

Hi guys,

Just thought I would let you's know that I have an xtreme comp edge 540 2x2 with smoke in it if you have any questions about how I have done any of it. By the way I love how it fly and does 3D they look awesome in the sky because it is different and is an EDGE lol.

Cheerz,
Dave