Northern SE IMAC '07 primer / bootcamp

[tl3]

	Quote:
	Guys, Any idea on what time things are going to start on Saturday.....

9:30 Sat, we'll start with classroom stuf and work from there. Couple of things to mention: Know your sequence inside and out, doesn't mean you have to have flown it a lot, just have the manuevers committed to memory, sequences are found here: http://www.mini-iac.com/DesktopDefault.aspx?tabid=1
Bring a stick plane, if you don't have one there are templates for making one here: http://www.mini-iac.com/DesktopDefault.aspx?tabid=129

Pilots, below is the most recent list, if your name is on it, please confirm with a pm to me.

1.)Kent Porter-sportsman
2.)Alex Porter-sportsman
3.)Kent Huntsinger-basic
4.)Josh Bunn-sportsman
5.)Pride Grim-basic
6.)Matt Richards-sportsman
7.)Bob Richards-sportsman
8.)Rodney . . . basic
9.)Pete Castine-adv
10.)Todd Beard-basic
11.)Mike Dinu-basic
12.)Jamie Turner-basic
13.)Kyle Stewart-adv
14.) Albert's Dad - Sportsman
15.)Tony W. - Basic

See ya all in a couple of weeks . . . bring your woolies!
t

[Downhumpty]

For the ones staying over night, where are you staying?

Kent Porter

[rmothers]

Motor Home We could problably squeeze one more....

[pcastine]

Kent,

We're staying at the Spring Hill Suites Richmond VA Center 9701 Brook Road Glen Allen , VA 23059. Map shows it's only about 7 miles from the field.


Pete

[toprudder]

I'm reserved at the Ashland Days Inn, 804-798-4262. Three miles away, Hotels.com says the room rate is $55. With AAA membership, 49.95. There are a bunch of hotels in Ashland.

Bob R.

[tonewms69]

Can someone post the actual address of the flying site, so I can enter into my truck GPS?

TIA,
Tone

[flyin woodbutcher]

11198 Cross Corner Rd
Ashland Va. 23005

[ifly3d]

so whats up for the evening events ? foamy flying or just drinking all of kents beer.

LOL Kent pm me with your cell number in case I need it

thanks, josh

[flyin woodbutcher]

anything you want. The heat in the barn is working good now. We can fly foamys , drink all the beer you can bring or work on broke planes.

FWB

ps I might have a few tasty beverages hiding in a corner somewhere.

[Bat Fastard]

We need a (LARGE) spot light for the foamys.

[prizzy]

hello! I am new to IMAC and flying in general. I am very excited about this weekend. I was wondering if this is going to be sort of laid back, or more formal? My friend and caller will be coming also, so we can both learn. Will there be open flying? Any 3-D instruction?

[tl3]

Hey Prizzy,
This will be about some instructional time indoors - covering material that is important to know when flying IMAC - and about flying. When it comes to being on the flightline, my goal is to have each participant fly with either Pete, Dave, me, or all of us, and get a comprehensive debrief afterwards. As for after-hours, well that's up to Kent Plan on about 9:30 - 4 on Saturday being "official" bootcamp time, and 10 - 1 on Sun - we'll get as much flying in as people's thumbs and fingers can handle. As for 3d - what's that? . . . I'm sure we can get you a few pointers. . .
t

[ifly3d]

DID HE SAY 3-D ???????? I bet you can get some of the guys to show you some stuff. I heard there was a pound over there My plane needs a wash. Hint Hint. Hey kent brake the ice out of it for the weekend.

[flyin woodbutcher]

We going to use the rudder on your plane to break the ice.

[tonewms69]

What channels are folks flying for this primer?

Mine is 41. It might not be a bad idea to put the list of names with perspective channels by them. ...just a thought....