The GiantRC SwapShop!

FlightPower EVO-RX 2100 mAh 7.4v Li-PO Receiver Battery! NEW

zzw26n@comcast.net — Sun, 22 Nov 2009 00:54:04 +0100

Posted by: zzw26n

Description: For Sale Price $23, plus $6 Shipping, USA Only New FlightPower EVO-RX 2100 mAh 7.4v Li-Po Receiver Battery Retail for Battery $43.99 Includes: (1) EVO-RX 2100 mAh 7.4v Li-Po Battery http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWRT0&P=7 Pay Pal & MO Only, Questions to zzw26n@comcast.net

FROMECO (1) 5200 mAh Lithium_ion RX Battery! New!

zzw26n@comcast.net — Sun, 22 Nov 2009 00:47:45 +0100

Posted by: zzw26n

Description: For Sale Price $40, plus $6 Shipping, USA Only New FROMECO 5200 mAh 7.4v Lithium_Ion Receiver Battery Retail for Battery $72.00 Includes: (1) 5200 mAh 7.4v Lithium_Ion Battery Pay Pal & MO's Only, Questions to zzw26n@comcast.net

FROMECO Scale Avionics - Complete 50cc Set Up!! NEW!!

zzw26n@comcast.net — Sun, 22 Nov 2009 00:27:05 +0100

Posted by: zzw26n

Description: For Sale Price $190, plus $9 Shipping, USA Only Complete Battery & Switch Set Up from FROMECO Scale Avionics Retail for package is over $270 Includes: (2) Silver Badger Switches with Charge Port - Deans in / Deans out (1) Fromeco Regulator with Deans in / two JR leads out (1) Fromeco 5200 mAh with Deans out (1) Fromeco 2400 mAh with Deans out Pay Pal & MO Only, Questions to zzw26n@comcast.net Buyer must Pay within 3 Days of Offer. No Buyers outside the US.

Radio Function/Switch assignment labels for JR XP9303

cykhoi1@new.rr.com — Sun, 22 Nov 2009 00:06:14 +0100

Posted by: Sukhoi1

Description: I purchased a XP9303 (Used) Transmitter configured for Heli use. I am in the process of reassigning function switch locations on the radio to put it to an Acro configuration. Will pay up to $15 for the Acro function switch function labels (shipping included) to replace those used in the heli configuration.

Ultimate 37%

kwilson@deximaging.com — Sat, 21 Nov 2009 23:59:02 +0100

Posted by: kwilson

Description: Beautiful PAU 37% Ultimate biplane. Has DA-100, all Hitec 5955 servos, Smart-Fly electronics, titanium and carbon fiber linkages, carbon fiber wing tubes and landing gear, less than 20 flights. This is a fantastic value for the quality of aircraft.

Pilot figures that LOOK JUST LIKE YOU, From PILOT PORTRAITS�!

mikebrentct@yahoo.com — Sat, 21 Nov 2009 23:07:29 +0100

Posted by: Winginnit

Description: Now, you can have a personalized, one-of-a-kind pilot for your R/C Airplane from Pilot Portraits�, carved directly from LIGHT-WEIGHT contest-grade balsa to look JUST LIKE YOU! Chris Woycke just received his Pilot Portrait� of his son, Nick (red hat above). He'll be flying his dad's 40% Extra 260! Brad Parsons of Napa, California just received his Pilot Portrait (orange hat above). It's going into a Slick 540. FORGET THAT 'HELMET HEAD! You can now have either your favorite celebrity piloting your beautiful r/c airplane.. or YOU. Pilot Portraits� are unique to your likeness and individually hand-carved and painted using your photo reference so that they resemble YOU and nobody else. Finally, a pilot figure that will fit within your canopy and cockpit exactly as you've always wanted it to. You can order extras to personalize your pilot and make it LOOK- JUST-LIKE-YOU!: Sunglasses, headphones, hat with logo... just ask! Each pilot is made-to-order and scaled to fit your R/C Aircraft and yours alone. You've always wanted to 'pilot' your own airplane... NOW YOU CAN! Simply provide digital photos of yourself by following the guide below: 1- Measure the area within your cockpit from the canopy floor to the top of the clear canopy where your pilot will sit. 2- Measure the width of the canopy floor from left to right making sure this is the exact area where you will mount your pilot. 3- Provide 4 photos (jpegs if possible) of the person who will be carved in balsa: one of the front of the face; one of the left side of the face; one of the right side of the face. Finally, one of the back of the head. 4- Stipulate whether your radio control plane is 1/5 scale, 1/6 scale, quarter scale, 27%, 31%, 33%, 35%, 40%, 50%, etc. Your personalized, one-of-a-kind and hand-carved pilot from Pilot Portraits� will be shipped insured via priority mail. PayPal, Money Orders, Personal Checks accepted. Please go to my web-site to see more Pilot Portraits� and additional information: http://www.mikebrentart.com/pilotportraits.html YOU CAN EMAIL YOUR QUESTIONS DIRECTLY TO: mikebrent@charter.net Order Your Pilot Portrait� And Compliment Your R/C Aircraft By Putting YOU In The Pilot's Seat! Prices for Pilot Portraits� start at $129.99.

2 brand new Aerovate 45cc rear induction gas motors

james_senicka@symantec.com — Sat, 21 Nov 2009 23:05:09 +0100

Posted by: jsenicka

Description: I have 2 brand new in box Aerovate 45cc rear induction gas engines. Never mounted or run. 2 year warranty card still in the box. These were bought brand new from KMP less than a month ago for a warbird project my Dad was looking at, and we decided to go a different direction. Comes in original box with all parts still in original bags. Free shipping in US. These sell for $299 plus shipping. My loss is your gain. Looking for $250 each shipped in US

120 size (70" to 74" WS) 3D/aerobatic plane with 25cc to 40cc gas engine

sparky_@charter.net — Sat, 21 Nov 2009 20:50:09 +0100

Posted by: sparky7670

Description: Looking for a ready to fly 120 size (70" to 74" wingspan range) 3D/aerobatic plane (e.g., Edge 540, Yak, Extra, Sukhoi SU-26, etc.) Needs to have a reliable gas engine with electronic ignition in the 25cc to 40cc range. This is a first gasser for me and doesn't have to be new or in perfect condition. However, I do want a solid plane with good power to weight for 3D. I don't need a receiver but we can discuss servos, batteries, etc., that may be in the plane. I'm in central CA near the coast around 200 miles north of LA. Will meet halfway up to 120 miles or so. Otherwise, we can discuss shipping options.

Engel 31.5x12 CF Prop

flyinrazrback@yahoo.com — Sat, 21 Nov 2009 19:53:57 +0100

Posted by: Flyinrazrback

Description: This is an Engel 31.5x13 CF prop. Prop is in excellenct condition but has one spinner rub mark on the front (see pic). It has been drilled for DA/3W 150 bolt patterns. This was my fav 150 prop. Asking $70 shipped. PM if interested.

NIP Smart Fly Bat Equalizer 3D

flyinrazrback@yahoo.com — Sat, 21 Nov 2009 19:21:53 +0100

Posted by: Flyinrazrback

Description: New in package Smart Fly Equalizer 3D. Asking $30 shipped. PM if interested.

NIP Smart Fly Bat Share

flyinrazrback@yahoo.com — Sat, 21 Nov 2009 19:19:02 +0100

Posted by: Flyinrazrback

Description: I have a new in package Smart Fly Batshare. Asking $20 shipped. PM if interested.

35% TEXAS 260 ONLY 24Lbs!!!

keithav8tr@sbcglobal.net — Sat, 21 Nov 2009 18:02:03 +0100

Posted by: KMcDonald

Description: TEXAS 260 The Texas 260 is a custom built 260 based on the 35% Troy built 260. The differences between the Troy built and Texas 260 are as follows. 1. Carbon Fiber Cowling 2. CF Canopy & Hatch 3. CF Wing tube 4. CF Wheelpants 5. CF Tailwheel 6. CF Control horns 7.Full span ailerons, increased the area of Rudder and Elevators for Max 3D performance. Added balanced tabs to elevators. 8.Leading edge of wing and Tail group are Razor sharp for better boundary layer separation, helps on the high alpha/stalled maneuvers. Equipment BME 110 Extreme- Super light and powerful. Hovers at half throttle Hitec 5945�s and all flight controls. 2X aileron, 2X Rudder, 1X Elevator,1X throttle 2X Fromeco 2400 Li-ion packs, 2X Fromeco Regs, 2x JR heavy duty switches. SWB Servo arms on all servos. TNT custom bent main gear. Hangar 9 Wing and stab covers included. The airplane weighs ~ 23-24lbs and flies fantastic. I have never flown a lighter wing-loaded plane than this. It flies awesome 3D as well as IMAC type flying. I would rate the plane as a 8-8.5 out of ten. The cowl was repainted a year or so ago and the yellow does not match 100% perfectly but is close. Airplane ready to fly minus prop and Rx, Priced to sell $2500. Local pickup only or will deliver within 50miles of the DFW area. WILL NOT SHIP!! Please email for info, offers or more pics,,Thanks.

QQ 101" Yak 54 Airframe only!

ryan4keene@yahoo.com — Sat, 21 Nov 2009 16:31:40 +0100

Posted by: squidster

Description: PICTURES TO COME SOON! QQ Yak 54 101" in the Kimball scheme. I am selling airframe with dubro hardware valued around $100. It has all of the push rods and horns except for the rudder. The plane was involved in a rough landing but was repaired stronger than it was before. The only noticable damage is to the cowl; and it can be fixed, it just needs some paint work. The plane flys IMAC and 3D very well. I never really 3D'd it hard, just some harriers and hovers. I took 4th with it at an IMAC contest in GA right after the maidin the day before.

eflight min edge 540 3d

tiffylover15@aol.com — Sat, 21 Nov 2009 14:42:41 +0100

Posted by: tiffanylover15

Description: have a eflight mini edge 540 for sale it has about 4 flights on it and it flys great has unlimited power it has a himaxx outrunner it has futaba mini servos in it comes with a extra cowl and the wheel pants have not been put on yet had to put bigger wheels on it beacuse of the grass field i am flying off of i am asking 200 -300 for the ready to fly with a airtronics 6 channel and reciever i am willing to ship depending on how far away and the buyer pays for shipping please email me at tiffylover15@aol.com

Parkzone BF-109G .15 motor NEW

misplacedtexan53@gmail.com — Sat, 21 Nov 2009 14:03:11 +0100

Posted by: misplacedtexan

Description: This is the motor that comes with the BF-109G from Parkzone,I pulled this out to replace with a different power setup.It is brand new,never had a volt put to it. Price includes shipping

3W 157 Stock Mufflers

lezlee@TeamHeninger.com — Sat, 21 Nov 2009 06:02:09 +0100

Posted by: Phil Heninger

Description: Need Stock mufflers for a 3W 157

futaba t9chp fm/pcm heli/plane radio system

johnsheri@windstream.net — Sat, 21 Nov 2009 05:43:41 +0100

Posted by: johnsheri

Description: like new fuatab t9chp 9 channel transmitter. still has the protective coating on screen. comes with i receiver. all like new. 150.00 obo shipped in the usa. johnsheri@windstream.net or john 440-994-9477

Ignition for a ZDZ super 80

Unlimitedflyer@Comcast.net — Sat, 21 Nov 2009 03:21:56 +0100

Posted by: unlimitedflyer

Description: I'm looking for an ignition for a ZDZ super 80RV-J. In good working condition.

Cap 580

munchkin91995@aol.com — Sat, 21 Nov 2009 01:21:02 +0100

Posted by: 3d "kid"

Description: This cap 580 has a 1(BME 100 2(645MG SERVOS (7) 3(Has DA stanard mufflers 4(You will just have to add a reciver and go (note:had a 9303 2.4 sytem on it ) This BME is a very good smooth running egine, Also has all aluminium linkages and servo arms

Ace Digipulse

mike_elaine@comporium.net — Fri, 20 Nov 2009 23:35:48 +0100

Posted by: eznsc

Description: Ace Digipulse charger. Will pay a fair price for one in good condition. I understand these are no longer available from Ace.

BEAUTIFUL,CLEAN COMP ARF KIWI SCHEME 260 2.6 DA 100

ajtacz628@yahoo.com — Fri, 20 Nov 2009 23:34:48 +0100

Posted by: AJTACZ628

Description: A BEAUTIFUL SUPER CLEAN KIWI SCHEME Comp arf 260 2.6 w/ a super clean DA 100 w/ stock mufflers ,true turn spinner ,and JXF 27X10 PROP, dont know the motor history but from the looks its fresh and barely ran , There are no electronics in airframe as of now .. can include 4 HI TEC 5985 and 2 JR 8711 and 1 JR. ST125 metal gear for throttle..............$ 2600.00 w/ servos or $2200.00 airframe and DA 100

Delete.

ottertok2004@yahoo.com — Fri, 20 Nov 2009 20:09:14 +0100

Posted by: Adrenalin2m

Description: Found some.

JR Matchboxes (3)

wrigleyville101@yahoo.com — Fri, 20 Nov 2009 18:14:58 +0100

Posted by: smokin

Description: I have (3) JR Matchboxes for sale. These have been used for a few dozen flights and are like new. They sell new for $69/ea. I'll sell them for $45/ea shipped CONUS or $120 for all three shipped CONUS. Thanks for looking. Matt

Fromeco Regulators

wrigleyville101@yahoo.com — Fri, 20 Nov 2009 18:09:14 +0100

Posted by: smokin

Description: Ok guys... I have (2) barely used Fromeco Regulators. These are the Saraha Deans in Deans out setup. They sell for $54 new and I will sell the pair for $60 shipped CONUS. Thanks for looking! Matt

42% AeroWorks Ultimate Bipe (new version)REDUCED

tonywhite@galaxyblimps.com — Fri, 20 Nov 2009 02:45:30 +0100

Posted by: Galaxy 3D

Description: I am selling this airplane because of loss of work. I really hate to let this one go. It is an awesome flying airplane. This airplane is priced to sell so please only serious offers. This airplane has fewer that 10 flights on it and the motor is broke in properly. Here is a list of the equipment in the plane: -3W 220CS (wo/paint) 4 cylinder engine w/canisters -3W 32X12 carbon prop -5" aluminum spinner (AirWild) -12CH 2.4 JR receiver (bind and fly) -Data logger -2ea Spectrum 7.2v Li-poly receiver packs 6000mAh -2ea Thunder Power 7.2v ignition packs 1320mAh -Hitec 7955TG's on all flight surfaces (4 on the rudder) -Sullivan Sky Writer smoke pump w/3cell Li-poly pack I have reduced the RTF to $5,800.00 (have $6,500 invested) I am willing to sell airframe w/ radio gear only for $3,500.00 Will crate and ship for additional $200.

2002 Ford E-150 Work Van

joe@angelsonwheels.com — Fri, 20 Nov 2009 00:51:24 +0100

Posted by: juicesqueezer

Description: 2002 Ford Work Van- Drove to work and hauled rc airplanes. Cold air, new tires, new brakes and ball joints and has indoor outdoor carpet on floor of van in rear. Very dependable vehicle and would be a great hauler for Giant Scale. I am looking more for a family size vehicle, so reason I am selling. 91,000 miles on the V6 engine. Fuel mileage not bad for a van at around 20 to 22 mpg. I would not be afraid to drive this anywhere. Thanks for looking!

Hobbico Hobbistar60 RTF w/ full gear

louisiana_outlaw@yahoo.com — Fri, 20 Nov 2009 00:39:14 +0100

Posted by: BOSSIER_ROB

Description: Here is a near brand new Hobbistar60 RTF with O.S.61La. I'm selling for a friend. His son was interested in the hobby but had to take a year away for surgery and lost interest. It was flown less than 10 times,all by me with him on a buddy box. It was stored inside until last week when it was sent to the garage and had a small hole poked in the wing covering along the way through the door. I will patch that before shipping. That's the only flaw. He is selling all field gear with it including: Futaba radio system included with the combo from Tower Hobbies, 1500mAh Ni-Mh Rx battery Field box with detachable starter box, Tower Power Panel Hobbico Torque Master starter/ 12v battery combo Electric fuel pump Glow ignitor for the box and one rechargable Several assorted ca glues, epoxy, spare props,plugs,tools, etc. Never used new heat gun and iron combo and lastly, a Triton2 charger used four times. Basically, you have everything you need to charge and fly. It is perfect for anyone entering the hobby. I highly reccommend it as a first plane. Feel free to PM me with any questions. He will ship at buyers expense and I will make sure it's boxed properly for the trip. Prefer Paypal, but open to other options

40% Carden Extra 300 Midwing: The Extra is nearly perfect, a couple very small hangar rash dents.

k.van@earthlink.net — Fri, 20 Nov 2009 00:33:46 +0100

Posted by: Kris

Description: DA150 with MTW 110 canisters Pete�s Model Carbon Spinner Mejzlik 28.5 x 12s 3 blade prop Carden Canopy Helmut TBM Wing Bags Carden Super Carbon Main Gear Titanium Tail wheel Covered in Monokote Smartfly Power Panel Smartfly Dual Turbo Regulator MPI Regulator on ignition 2 Fromeco 5200 LiIon 1 Fromeco 2700 LiIon AR9000 Rx 2.4ghz Professionally Framed Flies Straight and True Less than 75 flights No 3d, No hard landings or prop strikes Airframe $2500 Bind and Fly $5200 Will not ship but will drive a reasonable distance Serious Inquiries Only! Will not part out.

JR 10x old style transmitter and 2 910z recievers

jonnybdotcom@yahoo.com — Thu, 19 Nov 2009 23:51:19 +0100

Posted by: 50%PITTS

Description: I have for sale a JR 10x Transmitter with touch screen and hand made wood carrying case with 2 JR 910z Recievers.... All work great and transmitter will work with the JR spectrum module available from horizon hobbies. All 3 have been sent for check ups to horizon hobbies and have a very clean bill of health. I have used this transmitter and recievers for the last 3 years and love them, I have now converted all my planes to work on the spectrum system thru my JR 9103 so this transmitter is no longer needed. Shipping included in the price to the united states. Pictures are available upon request! Transmitter is on channel 18!!! 72 mhz Payment accepted as money order or western union, money gram Please call 607-423-8459 for any other detailed questions Thanks for looking Jon PS yes a wall charger is included with this... The transmitter battery pack is only one season old and its a 1100mah nhd THIS TRANSMITTER IS CURRENTLY IN PCMZ MODULE BUT CAN BE USED WITH THE NEW SPECTRUM MODULES FROM HORIZON HOBBIES

Wanted: CC85HV or Jeti Spin 99

tonealone@telus.net — Thu, 19 Nov 2009 23:50:40 +0100

Posted by: tonealone

Description: Wanted: CC85HV or Jeti Spin 99 Thanks

Hacker C50 14XL or 15XL w/ 6.7:1 Gear Drive

tonealone@telus.net — Thu, 19 Nov 2009 23:49:47 +0100

Posted by: tonealone

Description: Wanted: Hacker C50 14XL or 15XL w/ 6.7:1 Gear Drive Thanks

TT TOC Extra 260 100% R.T.F.

planebender@sbcglobal.net — Thu, 19 Nov 2009 22:04:44 +0100

Posted by: planebender

Description: I built this Badd Ass 260 about 6 months ago and the owner is forced to sell, He found only enough time to put on about 35 flights and the plane shows NO signs of wear. It's in awesome condition. Plane comes 100% RTF with the following Equipment: DA150 with DA Compact Cowl mufflers (Installed brand new) (14) JR 8611A servos SWB servo arms all around SWB Rudder system (5) JR matchboxes Mejlik CF Spinner Mejlik 32X10 CF Prop JR 921 2.4 Reciever All pushrods are Titianum with Dubro HD Ball links (2) Duralite lith Mangoniese 3000 packs and (1) 2150 LI pack on Ign. (3) HD chargejack switches Custom Pilot head Wing bags Just Bind, Fuel and Fly! I would be happy to ship this plane at buyers expence. Thanks, Dave (916) 716-7348

Smart-Fly Ignition Kill

thickey@carolina.rr.com — Thu, 19 Nov 2009 22:04:42 +0100

Posted by: teedee

Description: Like new Smart-Fly optical kill switch,price includes shipping. I dont need it so save some money by buying this for less.

35% J'tec Panzl, DA100 Ready to Fly!

jwalker@rfmd.com — Thu, 19 Nov 2009 19:59:02 +0100

Posted by: Unbalanced

Description: Hardly flown J'Tec Panzl built from a PAK. (Partially Assembled Kit) Covered/Painted to match John Klatt's Air National Guard Staudacher/Panzl show plane. Covered in Monokote and custom vinyl. No sagging or wrinkles! Control surfaces are sealed with matching covering. DA-100 (broken in, less than 4 gallons). Flex headers and JMB cannisters. Mejzlik 28-10. Carbon Spinner. Hitec 5955 Titanium Gear servos except for Rudder (JR 8711) and Throttle (126MG). Aluminum servo arms with Dubro ball links and carbon/steel pushrods. Aluminum wing/stab tubes. Aluminum landing gear (slightly caddy wampus from a deadstick landing). Smart Fly Power Expander. Smart Fly fiber optic ignition kill. Smart Fly Servo Equalizer 2's for ailerons. Fromeco Wolverine switch. Fromeco Sahara voltage regulator. 2x 5600 mAh LiIon battery packs - Rx. 2600 mAh NiMh ignition battery. MPI Ignition battery switch. 32oz Dubro tank. McFueller fuel dot. Custom painted Aces of Iron pilot figure. Dash panel. Wing/stab/rudder bag. - Hanger 9. JR 9ch 2.4GHz Rx (Optional/negotiable) Minor hanger rash, but overall pretty presentable. No time to fly. Must sacrifice! No lowballers please! LOCAL pick up. I will meet within a reasonable distance for the right buyer. Questions? Call me at 336-601-4626

Futaba 12FG 2.4ghz FASST system!!

pizan98@yahoo.com — Thu, 19 Nov 2009 19:50:38 +0100

Posted by: oregonrc

Description: Used for roughly a season and a half. Sale includes the transmitter with a Futaba case, stock 7.2V 1700mah battery, upgraded 7.2V 2000mah battery, manual and 1-R608RS FASST receiver. Very nice condition.

First generation Double Vision

www.varnerpainting@msn.com — Thu, 19 Nov 2009 19:00:08 +0100

Posted by: painter

Description: Double Vision I bought it when it first came out . It only has less than a gallon of fuel threw it . I am selling airframe only I Dont want to ship it if possible.

35% Aeroworks 260 wing

marzo91@charter.net — Thu, 19 Nov 2009 18:53:42 +0100

Posted by: Terry Marzofka

Description: I need a right side 35�roworks 260 wing. I also need a cowl. 715-570-3671 Thanks!

bergen magnum 44 3d turbine heli poss. trade for large scale

mactonite@mac.com — Thu, 19 Nov 2009 18:33:40 +0100

Posted by: tr0cks

Description: complete rtf skookum flybarless canopy is prior to clearing, looks like glass new 5500.00 come test fly 8717's spartan gyro bls251 on tail skookum flybarless electronics scott greys 3d 710mm blades v-tail 105mm blades custom canopy painted by acehelis looks like glass 5 gallon elec jersey modler fueler full of fuel 1 outrage 5000mah 7.2v lipo for receiver 1 outrage 5000mah 7.2v lipo for turbine easily get ten 10 min. flights on a single charge flight times are 11 min just flying around or 8.5 minutes of hard 3d flying

Precision Aerobatics extra 260

www.varnerpainting@msn.com — Thu, 19 Nov 2009 18:33:04 +0100

Posted by: painter

Description: Precision aerobatics extra 260 . I bought it took the plastic off and put it up. Comes with everything and i will bubble wrap it back up before its sent off.

3W 210 CS engine W/headers REDUCED

tonywhite@galaxyblimps.com — Thu, 19 Nov 2009 17:54:16 +0100

Posted by: Galaxy 3D

Description: This engine has never been flown. It has about 2 gallons of 50:1 lawn boy through it on a test stand. It is a Competition Series motor I ordered unpainted (because they run cooler without the paint) with a rear output shaft (we use the shaft to mount an on board starter) and with dual ignition. This is a sweet running engine with tons of power. I must sell this engine so I reduced the price to $2,100.00

QQ Pitts PythonREDUCED

tonywhite@galaxyblimps.com — Thu, 19 Nov 2009 17:39:24 +0100

Posted by: Galaxy 3D

Description: Again I must sell because of job loss. This airplane has very few flights on it. Only damage was when the landing gear mount came lose during a landing on a very ruff field.The landing gear mount has been repaired and reinforced. He is a list of the equipment: -3W 106CS (new) -JR 9CH 2.4 receiver (bind and fly) -Hitec 5955TGs on all surfaces (2 on rudder) -2ea Fromco 7.2v 5200mAh flight packs -1ea Fromco 7.2v 2600mAh ignition pack -Decal package from Bad Brad Graphics I am reducing the price to $2,500.

Mejzlik prop

www.varnerpainting@msn.com — Thu, 19 Nov 2009 17:10:04 +0100

Posted by: painter

Description: Mejzlik prop 22/10 on strikes drilled for DA50. Make offer please.

Spinners

www.varnerpainting@msn.com — Thu, 19 Nov 2009 17:07:16 +0100

Posted by: painter

Description: From left to right 3 1/2 , 3 1/2 , 4 1/2 , 5 w/ 1/2 in offset for composite arf plane. make offer for all. They are all tru turn.

Futaba 9ZAP PCM 1024Z

www.varnerpainting@msn.com — Thu, 19 Nov 2009 17:00:36 +0100

Posted by: painter

Description: Futaba 9ZAP transmitter R149DP reciever FP-TK-FSS synthesizer system FP-TP-FM w/ #32 crystal Futaba case

Seagull Ultimate Biplane RTF

omni_vega@yahoo.com — Thu, 19 Nov 2009 06:11:43 +0100

Posted by: flyboy28

Description: This is a ready to fly biplane. never abused or any hard landings just time to move on. Pull-Pull Rudder 3010 Futaba Servos on Ailerons and Rudder Original yellow wheelpants not installed, but included when sold. Ready to fly, less receiver. She has a Supertigre 90 that takes her to no limits.. Thanks

Carden 104" Yak 54 KIT 32% (100cc)

sbcs121@hotmail.com — Thu, 19 Nov 2009 05:23:05 +0100

Posted by: Crash & Burn

Description: Giants, Brand new in the box Carden 32% Yak 54 kit ready to ship to your workshop. I have decided to build a second 40% aircraft, so this beauty has to go. I will be including a brand new menz cut 4" Tru-Turn spinner drilled for DA100 with the sale. Would be willing to meet for delivery within reason, other shipping is buyers responsibility. Thanks for Looking

TTOC 33% Extra 260, DA85, MTW Can, 7855's,A123

merinodds@hotmail.com — Thu, 19 Nov 2009 04:51:20 +0100

Posted by: merinodds

Description: Only 5 flights on this one...need room for new birds. VIDEO: http://www.youtube.com/watch?v=pNvwn8xwv_k&feature=related TTOC 33% Extra 260 DA-85 MTW Cannister- rear output 7 7955TG's A123's (3) Kodiak switches (3) Smartfly Pro Optical Kill JR R921 with 2 remotes No original hardware used. (rocket) Wing bags Carbon wingtube Carbon spinner Mejlik 26X10 prop Only thing it needs is wheel pants, got grass cracks from flying at our club field. This thing is unreal! Amazing power-to-weight RTF! I will ship via greyhound but of course I prefer pick-up TRADES WELCOME - I need a DA170, other trades considered just let me know.

40% Godfrey 300

jraycut@gmail.com — Wed, 18 Nov 2009 23:33:55 +0100

Posted by: jraycut

Description: BBW Godfrey 300 monokote covered DA170 RE3 30-13 Mej Prop 8711HV servos all around Red Aero Pilot wing/stab/rudder bags extra canopy/wood (uncut) Tru-Turn spinner J&J tailwheel Aluminum servo arms Titanium links Fromeco Batteries Fromeco Charger JR 9303 2.4 radio ....and everything in between will not ship.

Spektrum VR6010 10 amp regulator and 2S 4000mAH lipo receiver pack

Draknkep@pacbell.net — Wed, 18 Nov 2009 23:33:53 +0100

Posted by: Draknkep

Description: One Spektrum VR6010 10 Amp regulator, and one Spektrum 2S 4000mAH RX pack, in "as new" condition. The regulator has less than 25 flights on it in the plane shown in the photo, and the battery has been charged twice (once before use, and once after the days flying) and used for four flights in one day. I have since sold the plane, but the gentleman who purchased the plane did not want this system. The regulator was bought new for the plane as was this battery. The reason for the difference in number of flights, is that I made a mistake, and left the original battery that I had bought plugged into the regulator, and even though the switch was off, the regulator still draws .01milliamps, and it ran the battery down flat and ruined it, so I bought a new one, then sold the plane a couple of weeks later. The regulator sells for $74.95... as found here...http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMVR6010 ...and the battery sells for $129.00 as found here... http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMB4000LP ... and I also have the optional splitter, that splits the output to two universal (JR/Futaba, etc.) plugs so that you can plug these into any two receiver ports to deliver the full power output) as found here.... http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMYHEC36 I am asking $135.00 for both including shipping anywhere in the conus. I will ship elsewhere, but at additional cost to buyer. As I have never sold anything on Flying Giants before, I don't know if there is a rating system here, but you can check my Ebay ratings under the name Draknkep (218 positive, no negative or neutrals), and the same name on RCGroups. PayPal only please... If you want more info, feel free to email me at Draknkep@pacbell.net, or call me at 408-799-6612.

Aero-Works 42% 260

daveandbethsrillito@comcast.net — Wed, 18 Nov 2009 22:49:30 +0100

Posted by: Dave Hargrove

Description: Aero-Works 42% 260 QB plane only for sale. has low time on air frame, set up for DA-170 and RE3 pipes. Will have the plane at the South West reginals as a backup. No shipping. Call me at 520-481-3726