Dynam RC Detrum's blog View Details
Archive for July, 2020
Posted by Dynam RC Detrum | 07-31-2020 @ 03:37 AM | 8,533 Views
3.7mm or 4.2mm hub/axle hole through the wheel can be choose
5.5 in(140mm) dia.
Works well on grass & paved runways
add metal Metal fittings
The wall thickness is consistent throughout the wheel giving you a balanced tire

DYNAM RC 5.5" Diameter Smooth Surface Rubber Tire & Wheel for RC Airplane Replacement Parts(2-Pack) (0 min 13 sec)

Posted by Dynam RC Detrum | 07-22-2020 @ 02:39 AM | 9,562 Views
Detrum Z3 nitro version is a flight controller for fix wing airplanes, It connects to the receiver on the airplane to provide the flight control.

Z3 supports 5 flying modes: 1. Return Home Mode: once actuated, the airplane flies back to the location where it takes off regardless of the airplane flight attitude; 2. Normal Stabilization Mode: provide basic gyro function to the airplane; 3. Safe Mode: control the airplane with pre-set parameters including altitude and direction; 4. 3D Lock Mode: hold the position when actuated and 5. Autopilot Off Mode: pilot takes full control of the airplane.

When the transmitter signal is lost due to out of range or the airplane is out of position due to pilot mistake, the autopilot functions and takes control to fly the airplane automatically back, which gains precious time for the pilot to react!

Z3 has an innovative and simple way to actuate the horizontal calibration, in the way that a computer or power reset are not needed.

Z3 is compatible with ALL of major 2.4 G systems in the market and it supports DSM, S.BUS, PWM receivers. Pairing with a Detrum program card, the parameters can be easily programmed.

Detrum Z3 ( Nitro version) according to the characteristics of Nitro & Gas Airplanes with large vibration, we have optimized the filtering algorithm to eliminate the impact of engine vibration on flight control, so that Flight control can be applicated on methanol aircraft and gasoline aircraft. And according to the throttle control mode of the gasoline-powered aircraft, the adjustment of the throttle stop and the adjustment of the idle speed are added, so that the aircraft does not have the risk of stalling or the throttle servo being damaged when returning from self-driving.

Return Home

Adding path control based on the auto-recovery mode, it allows the airplane to automatically plan the path, lead the airplane back to the starting point. Height is controllable during the return flight. You can exit the return mode at any time by waving the return switch, supporting one-button return and signal loss return.

Main Control IC

32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset

Control Algorithm

Original airplane attitude stabilization algorithm and control algorithm. Support normal wing, fly wing, V-tail airplanes, and 3D planes.

Flight Mode

Four flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance). You can switch between different modes by the toggle switch.

Adjusting the Gain

Set the gain and other programmable items with 3in1 program card.


Support PPM, S.BUS, S.UBS2, DSM2 and DSMX receivers



Hi All , Could you please recommend good youtube reviewers for this ? Thank you !