logo
Posted by extraeddie | 05-26-2009 @ 10:05 AM | 3,282 Views
Guys and Girls, can anyone tell me the hanger 9 ultracote colors are for qq pitts python kimball design? Thanks Eddie
Posted by erwin peters | 05-18-2009 @ 10:48 PM | 2,811 Views
hey AW flyers, what would be a safe distance to move back the CG for 3D fly . I started with 3.5" suggested by the manual and have move it back 3/8" more. How far from the leading edge and the tip of the wing can I move the CG without trasspassing a stable limit?

regards

Erwin Peters
Posted by 1rookie | 05-18-2009 @ 09:48 PM | 2,548 Views
Needing all the information and help. I can get about setting up a 30% Edge 540 PAU Leaning towards a DL55 or a DA50 for power , Hitec 5645MG on elevators and ailerons, 645 ganged on pull-pull for the rudder to cut down on current draw, 4.8 volt 1600ma on ignition ,with two 6 volt batteries of at least 2000ma for the receiver and probably a 42% battery share device on seperate switches for each battery, also an opti-kill switch. But I am open to any and all suggestions to set this up properly for enjoyable flying thanks 1rookie
Posted by OLD AUSSI | 05-13-2009 @ 03:21 PM | 2,368 Views
I am planning on attending my first Joe Nall event and have found that I have misplaced my AMA card. will they let me in on my AOPA card?
Posted by steve71 | 05-04-2009 @ 07:11 AM | 3,190 Views
putting together my h9 carden yak with 3w 85 twin, anyone tell me which 3 blade prop to use and can i use powerbox gemini with 2 kokam 2400 7.4 lipos for engine and reciever.
Posted by eor2002 | 04-30-2009 @ 08:02 PM | 2,586 Views
putting it back together
Posted by eor2002 | 04-30-2009 @ 07:50 PM | 2,669 Views
home made pipes
Posted by flynz4me | 04-20-2009 @ 04:26 PM | 10,039 Views
What did you all use on your first Freestyle?? Mine will be the Queen/David Bowie "Under Pressure" song...

Under Pressure (3 min 54 sec)


Comments??
Posted by bmxgt13 | 04-15-2009 @ 11:31 PM | 2,214 Views
I just bought a .40 size katana, will my OS .40la motor work on it with a 12.25x3.75 prop, or shud i try and fix my broken .46 motor and put that on instead? If anyone has suggestions please let me know.
Posted by Phantom66 | 04-08-2009 @ 08:38 AM | 3,175 Views
Hey guys just wanted to know whats the best Fuel Filter...out there for gas powerd engine..

Thanks...
Posted by scottr/c | 04-07-2009 @ 08:48 AM | 3,164 Views
my extra 260 with a mt 57 and canister eq6 is weights 19 lbs 8 oz i think this a bit heavy for a 50cc plane anyone ones thoughts?
Posted by MadMonkey | 04-05-2009 @ 03:53 PM | 7,007 Views
Last weekend I finished up all the little bits on the EZ Star UAV and headed for the field late Sunday. The wind had died down to nothing, which is not that common for spring in DFW.

I performed the maiden without the camera so I wouldn't risk a few hundred bucks extra on the plane

It flew just about perfectly, but it was slightly tail heavy due to the layout I had selected. Once I landed and installed the camera, TX, and battery however, it was perfect. Here's some pictures.

Completed plane




Me and my silly mug



Very basic base station setup... it's going to change a lot before the Airsoft event this thing was made for



And a couple of in-flight pics

Flyby


Flaps down for landing


So far it's a success. The event is coming up in two weeks, so we'll see how it goes! I think I'll modify one of the Wild Hawk kits I have for a backup airframe, just in case. Don't want to risk it all on one plane!<object width="425" height="344">

</object>I took off again with my base station on, and got a couple of minutes of video. Here's the results... I didn't have a way to directly record from the receiver, so we had to film my monitor. We'll have better quality next time!
<object width="425" height="344"> <embed src="http://www.youtube.com/v/2Tp5bKWz4mU&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></object>
Posted by water | 04-05-2009 @ 01:54 AM | 2,440 Views
i need some help on hanging from the prop,
i need to know how much extra power i will need in my engine,
propeller selection,
and ballancing the aircraft before flight,
and last how do i do it
Posted by mwills | 04-04-2009 @ 05:51 PM | 2,469 Views
does anyone have any info on them???? from nitroplanes ???? are they any good????
Posted by unojrcan | 04-04-2009 @ 03:45 PM | 2,253 Views
I HAVE A NEW JR R2000 RECEIVER FOR SALE. I WANT $110 PLUS SHIPPING. YOU CAN EMAIL ME
AT [email protected]
Posted by Jr25 | 03-30-2009 @ 11:29 PM | 2,503 Views
I recently crashed my WildHare Edge 540 (28%) and am looking to replace it with a 50 cc Yak. To keep the cost down, I am looking at either the AK Models (Rich Models) Yak 54 or the 50 cc RC League Yak 54. Both are priced about the same and come standard with CF tubes and landing gear. Any advise on which one is a better plane? For what it's worth, I'm not looking for something to do 3D with as I typically just enjoy flying around. Also worth pointing out is I have a Zenoah G62 that survived the crash and I would like to stick it on whatever I buy.
Any advise would be greatly appreciated.

Thanks,
Jr
Posted by erwin peters | 03-29-2009 @ 12:56 PM | 3,176 Views
Hi , my engine is a 102, the originally exit mufflers tubes were short on my round YAK cowling in order to exit enouhgt the cowling (they were inclined to the center of the engine). I replace the tubes with a 1/32 bigger the inside diameter and 1 3/4 " longer and keeped them incline to use the same exit hole in the cowling. the engine dropped from 6.400 to 6.000. The longer tubes have something to do with the lower RPM??

also I switch from 26-10 bolly to 26-10 Xoar both woods.
Following is a picture with the old tubes
best regards and thanks for your time

Erwin
Posted by MadMonkey | 03-28-2009 @ 10:43 AM | 6,537 Views
The UAV is almost done! All I have left is finishing the radio equipment installations, touch up the paint, and install the camera.

The camera is a KX191 and it has excellent quality. I think it's going to work well... Sunday should tell the tale though (maiden).

I squared off all the girly edges of the Easy Star, enlarged the rudder, and added ailerons to the wing (which will also act as flaps and spoilers). It looks nice! I'm using a Grayson Super Sonic V2 for power, which should be decent. Still haven't decided on gyros yet, but if I use them it will probably be yaw and roll.

Anyways, another update once it has flown!
Posted by kenny newton | 03-28-2009 @ 08:50 AM | 2,295 Views
where to buy one, the katana gs 70 size? anyone know?
Posted by john5909 | 03-17-2009 @ 03:53 PM | 2,813 Views
had the pleasure of meeting badbrad of Badbradsgraphics over a first time phone order this morning.what a good man,spoke to me as if I was a long time friend , told me of his new high office position of President of his local r/c club. congrats brad ! but back to the story, I ordered some powered by DL cowling decals & brad was in such a good mood that as a 1st time buyer he thru in a large powred by DL for the top of the cowl on my 30% yak for free! phenominal! just thought I would spread the good word about one of our friends on this forum.he has my support and hopefully one of these days I can meet the Man in person. good luck el presidente!