Posted by flyracer | 11-18-2015 @ 12:37 PM | 11,500 Views
Just completed the last SW district IMAC contest out at Las Vegas. I spent the entire year in the Sportsman bracket and it was an amazing experience. I saw my scores and skills consistently improve from beginning of the year to the last contest. I got to participate in the Tucson Aerobatic Shootout, competed against/with International Sportsman pilots and got to scribe next to legendary personalities in the Industry and Precision Aerobatic arena (Jerry H thank you!).

Along the way there were trials and tribulations that tested my resolve to be a better precision aerobatic RC Pilot... however, through the support of my wife and my team mates (Team Kaos), I achieved some amazing milestones in 2015. The foundation is set for the 2016 IMAC season!

Posted by pittsartist | 11-17-2015 @ 02:30 PM | 10,407 Views
Well, yet again it's that time of year.

2015 has been fantastic for me. My first visit to Oshkosh, my first complete aircraft build finished (and flown). Numerous "once in a lifetime" views of the world from the air, 6 or 7 films (I even seem to have finally seem gotten to grips with Premier Elements at long last !)

Anyway, here it is - 150 flying hours shoe horned into 4 minutes

I really do hope you enjoy watching it

Time Flys 2015 - An Aviators Yearbook (4 min 17 sec)

Posted by cherrybomb48 | 11-15-2015 @ 09:25 PM | 12,123 Views
Got to put the first four flights on my new Aeroworks Yak 55 today. My first thoughts are that this plane is very fun! It tracks super clean lines and with a little more adjustments to the CG it will do some great 3D. I got some video of the last flight before we packed up tis afternoon.

Hope you guys enjoy!

Aeroworks 50cc Yak 55m (7 min 4 sec)

Posted by Gtinbm | 11-15-2015 @ 01:19 PM | 8,568 Views
Building my first giant scale and gas airplane !!!
I recently acquired a 72" yak 55 (thanks again Dave!!), it is going to be my first gas plane, I am so used to the ease of electrics that this has been a bit of a project, I still have yet to get my dle 35 idleing good. I just haven't had much time to get it tuned with a two year old running around, but I am excited when its ready for its maiden. I will update some pics soon.
Posted by cgeisel11 | 11-10-2015 @ 06:27 AM | 9,365 Views
Huck It's Cold - Collin (5 min 33 sec)

Posted by Vapor Trails | 11-05-2015 @ 03:53 PM | 16,157 Views
Kewl Warbirds...

My gs P-47, vs a full scale F-16
Posted by Flyboys714 | 11-05-2015 @ 02:30 PM | 9,920 Views
Have a giant stinger with Sachs 4.2 69 cc gas engine and a seagull ultimate biplane with a satio 125 and both planes have good servos in them .i have flown them many times and they fly great. For a short time price reduce .500 will get them both until November 13th .these planes are well worth this buyers must come and pic up .and yes ready to fly .....my contac num 4782301051
Posted by rolling circle | 11-03-2015 @ 10:19 PM | 14,354 Views
Hello everyone. Another little vid to show off the extreme characteristics of this fun new foamy from Twisted and RC Factory. It's a real sweet setup. I'm flying 9x4.2 Carbon props from PT (available at Twisted) and TP 325 mAh 2S packs that are 70c (Magna Series). It's very lite but you can fly it outside in light breeze. Real cool

THE EDGE V3 SUPERLITE (2 min 59 sec)

Posted by Mode One | 10-27-2015 @ 08:52 PM | 10,192 Views
How much clearance is needed for adequate protection from overheating of adjacent aircraft plywood structure? I've got a DLE 55RA with stock DLE cannister and header pipe installed in an Extreme Flight RC 88" Edge 540. Right now the minimum clearance is about 1/4" between the header pipe and the under side of the the motor box.
Posted by rolling circle | 10-19-2015 @ 11:44 PM | 16,450 Views
The new EDGE 540 V3 from Twisted. This plane is really going to be sweet for indoor this year. It does vector the motor off the rudder servo if you want. Super Light, thin EPP, just enough carbon to make it strong and you know, like all TH products, it's durable. Tried it out in the outdoors on a 2S 360 and liked it. Indoors, it's going to be great. Just got it trimmed and looking forward to seeing some new motor packs in the mail soon. In the vid, it is all stock with the Twisted Digital power combo and it is vectored.

Much more to come on this new release.

THE EDGE 540 V3 (1 min 51 sec)

Posted by Scottsrn | 10-19-2015 @ 11:25 PM | 12,517 Views
Really this is from my copy of FSX on my computer.
Posted by Kendalldad | 10-19-2015 @ 07:35 AM | 13,642 Views
So I decided to sell my 108 extra 330 and build the new 106 3dhs edge 540
powerplant = Gp123 on mufflers
Servos= Savox 1270tg
Posted by pittsartist | 10-15-2015 @ 04:56 PM | 13,060 Views
A young chap I met at the UK R/C Nats a year or two back is now doing a media course and needed to make a mini documentary as a course assignment.

Here's the result. Hopefully worth a watch for a few minutes.

(how many of you can identify with the "plane on a stick" comments ? ..... can't believe I was the only one )

The Dream | A Pitts Artist (11 min 3 sec)
Posted by Kevinlau | 10-15-2015 @ 05:56 AM | 11,625 Views
DOMAN RC HOBBY offers a economy series of low profile servos for 1/10 rc drift car, these series servo have been on market for 1year yet,feedback well in China market,we hope more and more people enjoy it,the spec as bellow:
Item No. DM-S0911M
Voltage: 4.8V-7.4V
Speed: 0.12 sec/60deg (4.8v) 0.10sec/60deg (6.0v)
Torque: 7.1kg.cm (4.8v) 8.5kg.cm (6.0v)
Size: 40.5mmX20mmX28.3mm
Weight: 50gram
Motor: Brushed
Gear Train: Metal(Titanium gear)
Ball Bearing: 2BB
Type: Low Profile Servo

Item No. DM-CLS119TD
Voltage: 4.8V ~ 7.4V
Speed: 0.08 sec/60deg (6.0v) 0.07sec/60deg (7.4v)
Torque: 8.3kg.cm (6.0v) 9.5kg.cm (7.4v)
Size: 40.5mmX20mmX25.5mm
Weight: 45gram
Motor: Coreless
Gear Train: Metal(Titanium gear)
Ball Bearing: 2BB
Type: Digital,Coreless,Low Profile Servo
Posted by pittsartist | 10-14-2015 @ 03:54 PM | 11,556 Views
Some pretty much "raw" footage of my initial attempts at Aerobatics in my new RV-6

Quite a contrast to the Pitts, much faster speeds and more height gain / loss within each figure - but actually quite satisfying to fly.

I really enjoyed the bit at the end playing in the clouds. The extra speed over my Pitts makes for a more dynamic feel to this particular experience.

Anyway, hope you like it (but please don't expect any elaborate editing / multi camera angles - this is "as is", 1 angle / take and some music added.)

Vans RV-6 Aerobatics and some Cloudbusting (6 min 51 sec)

Posted by FlyerEd | 10-12-2015 @ 04:04 PM | 10,501 Views
I am building a Mitsubishi Zero with a wing span of 2.1m, link: http://www.hobbyking.com/hobbyking/s...18&aff=1934455
Flying weight will be approx. 6.5kg. I have chosen a 60cc Saito radial 4 stroke engine and I would like to run a 3 blade prop, can someone help me in sizing it, the engine model is Saito FG-602R3. Any other tips would be gratefully appreciated. Thanks Ed

Posted by 108buzz | 10-10-2015 @ 08:59 PM | 11,009 Views
What are some of the best 50cc wood kits? P-51, FW190 or Spitfire?
Posted by AceWingCarrier | 10-03-2015 @ 01:12 AM | 12,506 Views
HI Guys
We have a new Transmitter Glove/Mitt for FPV flying. This transmitter Glove will fit the transmitter with monitor mounted up to 12" inches in height. When you fly all year round you need something to protect and keep your hands and equipment out of the elements and warm.
We have twelve colors to choose from, a must have.
In cold weather, getting those beautiful shots in the snow, near the ocean where there is mist and sand or for your buisness shooting for your clients in all types of weather a great investment to protect your electronics.
We are the first in the Nation and World wide to produce a FPV Transmitter Glove /Mitt For First-person view (FPV), also known as remote person view (RPV).
We have our original and the new Version for FPV
Name: Extreme Trans Glove FPV.jpg
Views: 184
Size: 589.7 KB
FPV Transmitter Gloves
Thank You For coming Bye
Ace Wing Carrier
Products Made In The USA
Posted by rolling circle | 09-29-2015 @ 09:27 PM | 16,278 Views
Hello everyone!

Here's a video we put together to show off our North East Region's finest contest of the year, the regional finals we know by the name of Black Dirt. It's situated in Goshen, New York centered in some lush farmland for sure.

The video includes freestyle flying by greats like Tyler McCormack and Chris Thorpe. We always like to shake off the contest jitters and throw down some high energy freestyles before we head home.

Special thanks to Cody Wojcik for getting video of my freestyle.

Bittersweet to have a great time and yet to also know it will be quite some time before we see each other again to compete.

So, hope you enjoy the video folks. Take care!!!


Posted by pittsartist | 09-29-2015 @ 10:42 AM | 12,738 Views
A re-edit of my last film of Wales. Some colour correction and re editing to make as watchable as poss rather than just a "holiday" video.

Dragon Lands (3 min 26 sec)