Posted by Scottsrn | 04-25-2015 @ 06:05 PM | 10,498 Views
I was wondering would anyone know if it would be a bad idea to put a 3600 mah 4 cell lipo into my CZ yak. I'm doing a 3300 mah rightnow. The 3600 is no longer or wider just a little taller than my 3600 mah lipo, but it is 20% heaver than my 3300 mah lipos. It also a 40 c while my 3300 mah is just a 30 c lipo.
Posted by godofthunder77 | 04-24-2015 @ 01:54 PM | 9,931 Views
Hey Pilots!

We are running a registration to fly campaign! Check this out!


Must be pre-registered, present at the show, and checked in to fly at the event. Drawing to be held August 23rd at 3PM at registration booth!! OFFER IS FOR ONLY A LIMITED TIME SO REGISTER NOW!!

Register here NOW!!!! http://www.rcflightdeck.com/contesta...?event_id=3898


Posted by pittsartist | 04-21-2015 @ 10:40 AM | 10,810 Views
1m 50s film of a Pitts formation flight last Monday evening.

Hope you like it

Low Trail ......... A Pitts formation flight (2 min 7 sec)

Posted by Vapor Trails | 04-17-2015 @ 01:37 PM | 14,883 Views
Archaeopteryx Demo-Clip (7 min 38 sec)

really cool right?

Archaeopteryx crash COUBE ICARUS 2010 (2 min 0 sec)

Posted by skylandflier | 04-16-2015 @ 11:46 PM | 10,853 Views
The Road to 3D - PART 2

(If you havenít read Part 1, take a few minutes, go back and read it, and this will all make more sense! The Road to 3D is an entertaining look back at my 3 -year journey from total newbie, to 3D nut, to Co-owner of FlyBoys RC!

At this point, I had only been flying for just over a year, but I had already decided that I wanted to put aside all the endless foamies, scratch builds, leftover parts and side projects to pursue the art (sport?) of 3D. I was ready to put some focus into my hobby! Clearing out the clutter and ushering in "the good stuff" was the plan. "Quality over quantity" was my mantra!

Flying 3D requires a lot of trust in your airframe, and the confidence that it'll perform the way you expect it to on every flight. So, switching from foamies to a balsa airframe was obviously the next step. Of course I was a little nervous about balsa planes, cause when they crash, it's usually a big pile of sticks and a trip to the hobby store! Up until now I was flying mostly foamies, which were much easier to repair. But the time had come to take the next step.

Iíll always remember the first balsa plane I bought. It was a used 51" Slick 360 from Hobby King that I bought from a guy on Craigslist.

Name: HK Slick 51%22.jpg
Views: 184
Size: 1.21 MB
Description: Name: 1st Balsa Plane.jpg
Views: 209
Size: 255.0 KB

It was a BNF, which caught my attention, cause franklyÖ Iím not much of a builder. Seriously, building drives me crazy. I'm so impatient! I just want to fly the damn things! Am I alone on this? When I first flew the Slick 360, I was amazed at how little drag there was over the wings as opposed to the way foamies felt in the air. This thing glided through the air like glass, and I was amazed at how responsive it was. It was exhilarating to fly but honestly, it was a little scary too! I was no longer dealing with the flex and forgiveness of a foamy, so my stick movements were doing much more now! I immediately had to land and adjust my rates to compensate for this. And there was so much more momentum and lift now with a wood plane, it never wanted to come down! Clearly, no foamy would ever be able to compete with the stability, tracking, strength-to-weight ratio, and maneuverability of a balsa airframe, so needless to say I was hooked on wood!

In the following year I think I went through 3 of these Hobby King Slicks... plus a few others! OK, you're probably asking, why was I going through so many planes? Well, I had an airfield in my backyard and I hated practicing on the simulator, so you do the math. If it was a half decent day to fly, I was out there pushing the limits. (And killing planes.)

But, I was also still in the habit of bargain shopping. Buying cheaper planes, servos, batteries, and ESCs all eventually led to bad things happening at some point. I'm not saying there was never any pilot error... there was PLENTY of that! But I started realizing that better equipment meant a more trust-worthy plane, and a better flying experience overall.

Name: 51%22 HK Slick in the dirt.jpg
Views: 188
Size: 1.22 MB
Description: Name: Orange Slick Snapped.jpg
Views: 188
Size: 1.24 MB
Description: Name: HK Edge 540.jpg
Views: 216
Size: 535.2 KB
Description: Name: 48%22 HK Domin8tix.jpg
Views: 180
Size: 580.6 KB

Orphaned wings....

Name: Wings.jpg
Views: 205
Size: 764.8 KB

Remember what I said in Part 1 about how cleaning out the hangar was going to SAVE me money in the long run? Well, it didn't really work out that way. This 3D stuff was getting to be serious business! I'm not sure why, I was't planning on competing or anything like that. I guess I just enjoyed the hell out of it, and I had no intention of stopping here.

Eventually I had to get a better transmitter, cause the DX6i was no longer cutting it for me. The next logical step would have been a DX8 or something, but no... I went straight for the DX18! In retrospect, that was the best decision I ever made! It was a huge leap in quality and functionality. It had better gimbals, more resolution, tons features, and it fit my freakishly large hands better! I still use it today!

Name: DX-18 on the table.jpg
Views: 182
Size: 374.5 KB

I started buying airframes from 3D Hobbyshop, Extreme Flight, and eventually AJ Aircraft, which all proved to be phenomenal airframes! And of course the REAL 51" AJ Slick... still one of my all time favorite planes. I think I went through at least a couple of those too! But I always kept another plane or two in the hangar. Like the Extreme Flight Extra 300 EXP, and the AJ Aircraft Laser 230Z. All incredible airframes. They were built better, flew better, drew straighter lines, had less coupling issues than their less-expensive competitors. Once again, the quality of the products I was buying was giving me more and more confidence to try new maneuvers and improve my 3D skills.

Name: 51%22 AJ Slick & DX18.jpg
Views: 187
Size: 803.0 KB
Description: Name: 51%22 Slick small.jpg
Views: 187
Size: 1.03 MB
Name: 56Laser.jpg
Views: 196
Size: 513.8 KB
Description: Name: Planes at Sunset small.jpg
Views: 207
Size: 850.4 KB
Name: 3D Balsas in the Hangar.jpg
Views: 209
Size: 764.0 KB
Description: Name: 60%22 Extra EXP.jpg
Views: 193
Size: 729.2 KB

I also started buying better electronics like Hitec, Castle, Motrolfly, and Hacker, as well as Falcon and Xoar props. I love the throttle response of the Castle ESCs, the sturdiness and reliability of Hitec servos, and the smooth, quiet feel of Falcon wood and CF props. All of which improved my flying skills immensely. Of course, with all the programming features that Hitec and Castle possessed, I had to get learn about that as well. Of course being a Mac guy, I had to pick up a used PC laptop from my neighbor! $cha-ching!$ (It was only $50. Bah!)

Name: Extra and laptop.jpg
Views: 200
Size: 721.0 KB

So, you may be wondering, why do none of my photos have planes in the air? Well, flying at home has it's advantages and disadvantages. I was mostly flying alone, so there was rarely an able-bodied photographer around! But eventually I purchased a GoPro which helped the situation a bit.

Name: GoPro.jpg
Views: 204
Size: 665.8 KB

51" AJ Slick VIDEO------------->
AJ Slick 51" - Backyard Throw Down - Pilot: Darren Rust (3 min 28 sec)

I started picking up various maneuvers pretty quickly. I became more attentive to my setups. I was very interested in getting the airframe to fly straighter and more predictably by balancing the plane for dead-center neutral CG, which worked best for me. I spent a little more time measuring out the throws so they were perfect all around. I dug into the DX18 to create mixes to correct coupling issues, as well as adjusting throttle curves and setting maximum throws to achieve more aggressive stick response. Knife edges became straight as an arrow, hovering was not a struggle, harries and waterfalls were effortless. (Oh, and I started learning the NAMES of these maneuvers too!) I was really getting the planes to perform well. I had more confidence to try new maneuvers because I could trust the plane would do what I wanted it to. I eventually had the guts to try knife edge spins and other tumbling moves cause I had the confidence to fly out of them! And things got lower and lower, and lower...

Eventually, I ventured out of my back yard and started attending some local fly events, which was a real eye opener for me. I had so much to learn yet in this hobby, and I finally had a chance to meet other 3D addicts and share ideas and experiences!

Name: 3D Amigos.jpg
Views: 196
Size: 1,003.8 KB
Description: Name: Planes at 3M.jpg
Views: 201
Size: 943.7 KB
Name: Planes @ Watts 2014.jpg
Views: 207
Size: 909.6 KB
Description: Name: 3D Friends.jpg
Views: 209
Size: 976.6 KB
Name: IMG_3836.jpg
Views: 207
Size: 602.1 KB
Description: Name: IMG_3837.jpg
Views: 220
Size: 809.3 KB
Name: IMG_3838.jpg
Views: 224
Size: 835.7 KB

I was pretty happy with things at this point. I was flying pretty good, I had a good stock of planes, I started meeting up and flying with some new found friends, and I thought this was probably good enough for me. But it wasn't until I picked up a 3DHS 72" Extra that things changed for me again! I discovered that going bigger was definitely better!

Name: 72%22 Extra 330SC thumbs Up.jpg
Views: 196
Size: 1.14 MB

Stay tuned for "The Road to 3D - Part 3"
Posted by Pecanpatch | 04-16-2015 @ 10:19 PM | 12,871 Views
Tiggers Big Day

TiggerBats big show (Not a Drone or UFO) (7 min 47 sec)

Posted by skylandflier | 04-15-2015 @ 08:46 PM | 11,097 Views
The Road to 3D Ė PART 1

Name: Hoverin'.jpg
Views: 190
Size: 602.4 KB
Description: Name: Slick Hover 89.png
Views: 188
Size: 759.6 KB

Hey guys! This is my very first blog entry, and if all goes well, it won't be my last. I'll start with some backstory for entertainment sake, and later transition to a more informative approach for future entries. Hopefully someone out there will find it entertaining or amusing... or maybe even helpful! Haha! So, here goes...

This is my road to 3D.

At the time of this post, it'll be almost 3 years since I picked up my first transmitter (a Spektrum DX6i) and started flying RC. And in a seemingly short amount of time, I transitioned from a total newbie, to a crazed maniac, up-all-night, 3D addict, to co-owner of an online retail hobby store! What the #@%? Let me try to explain...

See, here's the deal... I live on some acreage right, and I fly over this huge field just beyond my back yard... like, all the time! I've got no trees, no power lines, and strangely tolerant neighbors. It's sick! And this juxtaposition to such open skies and plenty of grass to land on was the perfect storm to instill in me this terrible... AWESOME addiction!

Let's go back 3 years. I blame this all on my brother. He did it! He introduced me to this hobby in May of 2012, and I was particularly interested in what he was doing with scratch-built foamies. He was making these cool things out of pink construction foam and flying them around, and I thought man, I dig this! I especially liked the concept of a "low-cost", and somewhat recyclable hobby. Crash your plane? No problem! Just cut out a new one, throw in your electronics, and off you go!

Name: Pink Foamie.jpg
Views: 187
Size: 504.8 KB
Description: Name: Pink Foam Jet.jpg
Views: 193
Size: 670.5 KB
Description: Name: Pink Large Foamy.jpg
Views: 195
Size: 796.9 KB

I soon realized it wasn't quite THAT simple. There's a lot to learn here! But I thought maybe I'd ease into it with this Air Hogs glider travesty that I spent WAY too much time on. And no, it didn't fly worth a crap. I wasn't ready for this yet, I needed to get down to the basics.

Name: AirHogs Plane.jpg
Views: 185
Size: 568.2 KB
Description: Name: Air Hogs Garbage.jpg
Views: 152
Size: 335.1 KB

Scratch-building didn't exactly fit into my schedule. I'm a self-employed musician, singer, and studio producer with 3 kids, a wife and a mortgage! There wasn't a lot of time to fly planes let alone build them from scratch! But regardless, RC flying was something I HAD to try. So, I bought a Tx and a SIM and learned to fly on the computer first. Which was great advice from my brother.


"Don't fly a real plane first... you'll just crash it! Learn on a SIM." (I gotta provide SOMETHING useful in this post!)

A few weeks of practice in my off hours was enough to get my head straight. Then it was time for my first plane. An ARF foamy was a good starting point. It was low-cost, and most of the build was done for me... sweet! My first plane was a Hobby King Bixler, which incidentally was the best plane to train with! It was so docile and floaty, you could belly-land it in the grass, and yet if you hammered the throttle, it was quite a sporty little plane!

Name: Bixler days.jpg
Views: 181
Size: 469.2 KB

I flew the crap out of that thing! I put lights on it, tried some FPV... It was a great plane! Of course I crashed it a bunch, and repaired it, but that's the beauty of foamies! If you got glue, you're back in business! But eventually they don't fly great, they're heavily laden with glue and tape, and you end up throwing them in the garbage, and buying a new one. I think I went through 3 or 4 of them.

Name: Bixler Lights.jpg
Views: 178
Size: 881.9 KB
Description: Name: Bixler FPV.jpg
Views: 163
Size: 1.06 MB
Description: Name: Bixler Garbage.jpg
Views: 154
Size: 510.1 KB

I felt so guilty! There's no money in the family budget for extravagant activities like this! My wife thought I was going crazy or going through a mid-life crisis! (Which isn't far from the truth.) But this was a great discovery! I would work in my home-studio, and then go out and fly till the sun went down! Life was good! Eventually my wife realized the beauty in it. I was a much happier dad, and better yet, I was always home! And seriously, flying at home is AWESOME! Every RC pilot would probably agree, and is probably a little envious of my situation.

Name: Screen Shot 2015-03-06 at 2.38.23 PM.jpg
Views: 192
Size: 211.7 KB

This is kind of like living next to a Starbucks! I don't have to travel any further than my back door to feed my little "addiction". But with every addiction there is a downside. The downside was... I got pretty good at it! And of course I started buying more planes, and buying tools to fix those planes, and buying replacement parts for them... like props, batteries, servos, motors, glue, and.... you guys know what I'm talking about. Soon, there were planes all over the place! And now my wife was getting worried!

Name: Blue Foamy.jpg
Views: 177
Size: 382.8 KB
Description: Name: Foamy fly Day.jpg
Views: 172
Size: 957.3 KB
Description: Name: Mini SBach.jpg
Views: 163
Size: 609.2 KB
Description: Name: ThunderPower Charger.jpg
Views: 179
Size: 761.8 KB
Description: Name: PopWing.jpg
Views: 183
Size: 1,013.9 KB
Description: Name: FunBat.jpg
Views: 180
Size: 343.5 KB
Description: Name: Tech One Swift.jpg
Views: 161
Size: 1.26 MB
Description: Name: Tempo.jpg
Views: 183
Size: 598.7 KB
Description: Name: Bloody Wonder.jpg
Views: 184
Size: 707.8 KB
Description: Name: Zephyr Mod.jpg
Views: 153
Size: 608.6 KB
Description: Name: Foamie Hangar.jpg
Views: 173
Size: 896.7 KB
Description: Name: Stryker.jpg
Views: 176
Size: 586.9 KB
Description: Name: Yellow Zag.jpg
Views: 160
Size: 523.0 KB
Description: Name: Turnigy Batts.jpg
Views: 173
Size: 802.7 KB
Description: Name: SBach.jpg
Views: 177
Size: 330.2 KB
Description: Name: Tech One Trainer.jpg
Views: 180
Size: 720.5 KB
Description: Name: Foamie Collection.jpg
Views: 159
Size: 477.0 KB

... just to highlight a few. As you can see, I was bound by this terrible "guilt" of buying planes. Actually, I was bound and determined to fly everything I could get my hands on! Because as you all know, the maiden flight is the big thrill, right?! It's something you want to experience again and again! I once tried to explain this feeling to a non-RC person and it went something like this: "Learning to fly RC is like a young man having for the first time: Once you learn how, you don't want to stop!" OK, I'm not sure I said it exactly like that, but the point is... this was getting out of hand! I was driven by the fear of NOT having a working plane in the hangar! I mean c'mon, when you're a newb, you crash a lot! So having a ton of planes was good insurance! But in reality, I was getting frustrated with all the airplane maintenance I was doing! I had no workshop or garage space to do all this! We were sort of living amongst the "plane-hem". (short for plane mayhem...) anyway, I was spending more time managing the hangar than I was flying! Not to mention I was getting nickeled and dimed to death with all the little parts and gadgets!

It was this frustration that led me to an epiphany. I had to narrow down, and prioritize my hobby! For those of you who are at this juncture right now, I give you...

Tip #2

Ask yourself this simple question: "What kind of RC flying do I enjoy the most, or DO the best?" Is it fixed-wing, helis, multi-rotor, scale, warbirds, gliders, 3D, pattern, sport, foamies, balsa, pushers, pullers, gas, electric...? What really "turns your prop"? (another dumb made-up saying.) Once you figure that out, focus on that aspect of the hobby, and steer clear of the rest. Avoid the temptation of buying that new plane-of-the-month, just cause you wanna "see how it flies". Spoiler alert! It flies a lot like the rest of your planes! Do this and you will be happier, more fulfilled, and your house, shop, garage, and trailer will be free of all that RC clutter and "Plane-tenance"... (plane maintenance... sorry...) Not to mention it'll be easier on your wallet in the long run! - More on this in Part 2

So I made my decision. For me, it was 3D all the way! The next day I began selling off all the "other stuff". Planes that weren't aerobatic I either sold them as BNF or I stripped out the parts and sold them off on Craigslist. They were only distractions to me now. (And by the way, I made back some nice cash doing this!) I kept a few of the nicer motors and servos of course. But I had embraced the reality that I didn't want to just fly around in a circle. I wanted to have something to work on. I wanted to strive for something new when I'd fly. And I didn't want to settle for planes that just flew. I wanted planes that flew GREAT! I longed for bigger and better things.

Name: Receiver Sale!.jpg
Views: 181
Size: 771.4 KB
Description: Name: ESC Sale!.jpg
Views: 176
Size: 640.6 KB
Description: Name: Motor Sale!.jpg
Views: 183
Size: 1.12 MB
Description: Name: Servo Sale!.jpg
Views: 185
Size: 1.22 MB

The truth is, I was already dabbling in some aerobatic and 3D maneuvers with a couple foamies before I knew anything about 3D... It was kind of by accident really! Loops, Rolls, Hammerheads, Harriers, even Hovering were things I was already trying, and getting pretty good at! But then I started watching some videos on Youtube of some great 3D pilots, and that sealed the deal for me. Wow! These were BIG 3D balsa monsters flying low, and the pilots flew the absolute snot out of these things! This was the real deal! I discovered that 3D was a huge, vibrant, and growing aspect of the RC hobby, and I HAD to dig a little deeper, cause this is exactly what I was looking for!

It was time to up my game!

Stay tuned for Part 2 of - "The Road to 3D"
Posted by pittsartist | 04-14-2015 @ 05:43 AM | 11,396 Views
piit4 by [email protected], on Flickr
Posted by naldin | 04-09-2015 @ 07:44 PM | 12,799 Views
Mobius - Firts Test

Primeiro teste com a Mobius (4 min 16 sec)

Posted by Erik | 04-03-2015 @ 05:40 PM | 11,625 Views
Today we put in a good days labour removing snow from our strip in Vesteraalen, Northern Norway. And tomorrow, the whole gang will be out playin :-)
Posted by Flyboy1111 | 03-29-2015 @ 12:11 PM | 11,860 Views
This year the Richardson Radio Control Club is sponsoring their 12th annual Gary Harvey Memorial Charity Fly In.
The past 4 years we have had over $10,000 in Raffle Prizes. This year will be our first 2 day event and we expect this total to be even higher.
Best of all is that ALL PROCEEDS from the raffle as well as pilot fees got to three area charities.
For information visit rrcc.org or contact CD Ed Kranz at [email protected]
Posted by Flyboy1111 | 03-29-2015 @ 10:31 AM | 11,576 Views
The Richardson Radio Control club is sponsoring their Annual Big Bird Fly on October 4th. Registration Fee remain $20.00. Come join us for a great day of flying fellowship good food and a great raffle. RC Works is sponsoring the event and has donated a DLE 20RA and a 71 inch GEE BEE Super Sportster. Other prizes from various hobby shops will also be in raffle.
For information contact Phil Cartwright at [email protected]
Posted by Lowrider27 | 03-28-2015 @ 09:39 PM | 11,952 Views
What a great hobby I've happened on. Well actually I guess I've, Re- Happened on. When I was in my early thirties I borrowed my Dad's motor home and loaded the wife and kids in it and headed out to sunny California to visit, ( of course) DisneyLand. It was on this vacation that I became interested in RC planes and flying. We visited a beautiful park dedicated to RC of all kinds, but the old fellas and their sweet RC planes really got me going.. A few of the fellas showed up withbigger planes than I had ever seen before, so big in fact that they wouldn't fit in their vehicles. Wow. I couldn't beleive the fun these guys where having! I had to buy a RC plane setup too. So after cajoling with the wife for two days,she said ok. I ended up buying a 4 channel Aero Sport transmitter andreceiver, with a .25cc Super Box Fly. What was the salesman at Hobby Lobby thinking. Here's a dumb Canuck , he doesn't know what he's getting into. !!! And boy, I was clueless. I went through two of those birds, with the longest flight of approximately 60 seconds. Those Box Flys were fast and Squirrely! Never did master the art of flying with that setup. No instructor, no simulator,poor signal strength and ample interference; just a lot of false bravado on my behalf.. Time warp ahead thirty some years,and here I am enjoying this hobby to the max. Only because of new, better electronics, a Phoenix Flite Sim, and a very forgiving Eflite Apprentice, I'm now able to fly with confidence in rain,snow,shine,and wind (lots of wind here on the Prairies) . And in less than 100 flying hours on the Apprentice, I've already stepped up to 1/4 scale with a Hangar Nine Super Cub . What. Beautifull flying airplane.. So stable in the air! Also because with the aid of my IPhone ,IPad and Flying Giants of course, I've been able to cram into this 62 year old brain more info than I could have cleaned by reading a dozen books and in one tenth the time. Aw Sum! Who says you can't teach an old dog new tricks? I just love these new fangled electronics! I think I might be addicted!
Posted by pittsartist | 03-24-2015 @ 10:55 AM | 12,469 Views
Airborne at last - 6 1/2 hours logged so far

IMG_3716 by [email protected], on Flickr

With spats

IMG_0086 by [email protected], on Flickr


IMG_0069 by [email protected], on Flickr

GPS @ 2600 RPM

IMG_0113 by [email protected], on Flickr

..... Happy !!!
Posted by Scottsrn | 03-19-2015 @ 04:32 PM | 13,025 Views
Think this the order of how I like learning to fly aerobatices.
Rolls slow rolls points rolls snap rolls, snap rolls are the ones that I could do a little better at my snaps with my CZ Yak Knife edge. I'm good at these. I can do them right to left and left to right
and with the bottom of the plane facing me. It just seem a little harder to do knife edge turn arounds and knife edge cycles rightnow. Those still scare me just a touch.
Rolling circles. I do theses good
Spins I should work on them from upside down my rightside up ones are find
Loop all other basic i mac aerobatices I have down.
Hover still a little hard to sometimes but I can hover.
Harrier up right and inverded
Rolling harrier I do theses a little better and easier with my profile.
Thorue rolls I'm learning this one on the sim rightnow. Then I will start doing it with my profile 3d plane before I try doing this with anything more than a profile plane.
blender I been doing theses with my PZ T-28 and my profile 3d.
The rolling loop. Bet this be the last thing I ever learn cause of how hard it is to really make look nice and not chush.
Is there any other way I should learn all these things or order to learn everything in.
Posted by rcflyer66 | 03-18-2015 @ 09:02 PM | 10,869 Views
Started working on my GS again after retiring it last July! I was breaking in new engine and didn't have it tethered down securely! Unfortunately, lost first knuckle on my finger!

GP EXTRA 330L 33%
3W 80xi
Falcon 26X8
Posted by djpower | 03-18-2015 @ 03:01 AM | 11,034 Views
Founded in July,2010 DJ engines is a dedicated manufacture for RC gas engine and parts. With professional design, precision machining and reliable quality management, we ensure the best quality of our products.
In addition to our great products, we emphasize our post sales service. Any comment or question of using or tuning our gas engines are welcome and will be responded promptly by emails. We promise our customers not only the best product but also the responsible service.
Our vision is to provide the reliable RC gas engines of excellent performance with reasonable price and bring the greatest joy of hobby for all the RC pilots around the world.
Try DJ engines, fly high in the sky and feel the difference!

Our website: www.djengines.com
Posted by Jim T. Graham | 03-17-2015 @ 09:01 AM | 40,592 Views
Who knew some paperwork in the mail could get me so amped up! I have been running an RC event for over 10 years now. It was mentioned to me by Randy Cameron that it might not be a bad idea to become a contest director with the AMA. Brilliant!! I took the test, got the required signatures and thanks to the help from my district VP Kris Dixon I'm official! Turns out Kris and his father camped next to us on the 3D line way back when at Nall. Kris's dad and I are both hair farmers and enjoy the sounds of the Allman Bros!

Thanks to Randy, Kris and the folks at the AMA for making me official!!
Posted by oldiegoldie | 03-13-2015 @ 03:36 PM | 10,893 Views
I would like to purchase a set of Bob Godfrey legible plans for a 32.5% Bob Godfrey Extra 300. Hopefully someone has a set of plans for this bird.