logo
Posted by felisanchez1978 | 09-25-2020 @ 11:53 PM | 175 Views
I installed a red light on the panel to know when power is ready as well as a voltmeter so I can see battery level easily. Also installed second cover inside the fuselage to hide the tons of cables there. Any comments are welcome.... Looking forward to installing seats and pilot
Posted by felisanchez1978 | 09-24-2020 @ 09:05 AM | 362 Views
I attached the wings and struts and they look ok....my baby helped me paint the tank tray and the back of the firewall.....next step is to star with the fuel tubing and tank setup
Posted by artifdhdgoor | 09-24-2020 @ 01:11 AM | 401 Views
Yican Handicraft Factory is a famous China Products Manufacturers and Products factory, mainly producesChina Cement mini Buddha Statues factorycement handicrafts at the forefront of cement handicraft manufacturing. Over the years, product quality has become better and better, and the process has become more mature. There are more than one thousand products, including all kinds of exquisite cement pots, cement ornaments, cement hanging pieces, cement candlesticks, cement Buddha statues, wholesale Products and so on. Our products China cement handicrafts Suppliersare exported to all markets around the world and are becoming more and more popular and selling.
Posted by huacai | 09-23-2020 @ 10:22 PM | 426 Views
Company is mainly engaged in powder coating products production ,marketing and development, Company has 34 Semi-automatic production lines and ZEPPELIN bonding machine from Germany, production of 30 thousand tones within a year.
HUACAI regard product quality as the life of the enterprise, We strictly control the quality of products, in addition to own Resin factory, we use advanced testing instruments(SHIMADZU XRF,Mastersizer 3000E, Datacolor 400) to test products.
HuaCai
Posted by felisanchez1978 | 09-23-2020 @ 06:10 PM | 450 Views
I just wanted to add another picture of how these tundra tires look like....really huge....i will not inflate them more than the original air they came with due to extra bouncing when landing...
Posted by felisanchez1978 | 09-23-2020 @ 06:07 PM | 452 Views
A little bit of a mess with cables and also i will install some monokote-covered cardboard pieces in the back so i can hide cables and servos
Posted by felisanchez1978 | 09-23-2020 @ 06:05 PM | 455 Views
Scale lights positions, i made a light casing for installing the nav and strobes...not finished yet though...also the beacon underneath the plane can be seen
Posted by felisanchez1978 | 09-23-2020 @ 06:03 PM | 454 Views
FIREWALL WITH MOUNT INSTALLED AND HOLES DRILLED
Posted by felisanchez1978 | 09-23-2020 @ 07:00 AM | 493 Views
I decided to install the CDI on a side of the front of the fuselage using double-sided tape....i will be securing it later on when all the set up is finished
Posted by felisanchez1978 | 09-22-2020 @ 03:13 PM | 589 Views
Installed struts but have not tried to attach them to fuselage yet
Posted by felisanchez1978 | 09-22-2020 @ 03:11 PM | 588 Views
I decided to install the tachometer in the panel of the plane to make it look like a GPS jaja...the battery compartment will be hidden to make it look more scale
Posted by felisanchez1978 | 09-22-2020 @ 03:09 PM | 590 Views
Assembled and changed the color of the elevator and part of the rudder just to make it look different from other Cubs...hope you guys find it interesting
Posted by felisanchez1978 | 09-22-2020 @ 02:31 PM | 596 Views
LANDING GEAR ATTACHED WITH TUNDRA TIRES
Posted by felisanchez1978 | 09-22-2020 @ 01:32 PM | 609 Views
HI There

i just got my carbon cub and i am planning to get her as scale as possible.

first pics
Posted by rmasek | 09-20-2020 @ 12:42 PM | 1,109 Views
use to be red and white scheme redid entire air frame and recover.
Posted by yesterpvdc | 09-16-2020 @ 03:21 AM | 1,586 Views
Established in April 2000, Zhejiang Changyu New Materials Co., Ltd., is a professional China metalized PET films manufacturers and metalized Polyester films suppliers , Our products include metallized polyester film, MPET film, KPET film, coating film, ALOx film, PET film, etc. We keep stable cooperation with famous enterprises like Amcor, Bemis, Zijiang.In 2000, establishment of Haining Changyu New Metallizing Materials Co.,Ltd.In 2001, the metallizing equipment - American DARLY Custom Dyce-2200/the slitting equipment - British ATLAS MODEL CW800R SLITTERIn 2003, importing metallizing equipment - Germany Leybold Type TOPMET 2050B
Posted by orthobird | 09-15-2020 @ 10:00 PM | 1,906 Views
my dream plane.

SHHHHHHH. DO not tell my boss........



otherwise:


I was able to arrange for the Old Dominion to not deliver to my house. Instead, I went and picked it up and then unloaded it when the boss went out to do some shopping.

This is what you get when you order the airplane:

very well packaged and two boxes.

One box is 82" long. this is the one that has the fuselage.

the other box has the wings.

The quality of the packing is very good and no damage.
Posted by brauster | 09-15-2020 @ 01:01 AM | 1,698 Views
ZheJiang VOB Technology CO.,LTD. comprehensive practice of modern enterprisemanagement system.30 years experience in product design and manufacture.Introduce well-known brand precision processing equipment.The annual output is 100% to meet all customer needs.ISophisticated scientific and technological innovation team, dozens of professional and technical personnel.National and international certification.
Posted by Teddy | 09-12-2020 @ 12:13 AM | 2,080 Views
Okay been flying 3d for 15 months, on my sixth plane
3rd PAU
Skywing Edge 60 inch
Pilot Extra 330sc
Aj Lazer

..been a hell of a journey this 3d flying...

The Plane specs
60 inch PAU supplied by CARF
Castle Talon 90 ESC
MKS HV 9767 Servos
Scorpion 540 kv 4020
4000 mAh nanotech LIPOS
Extra large 4 inch foam wheels for taking of on long wet grass fitted with pants...
16 x 7 Xoar prop or 15 x 8 prop
Has much rudder and elevator throw as I could make possible
The castle talon suffers from the connectors coming loose mid flight so I ended up using small silicone wire extension piece to allow a degree of flex and also found covering the connectors once installed with a strong silicone adhesive...this has been great, no disconnections since!!

What Expo's do folk use ?
I'm just in process of setting up a spektrum flight pack energy sensor, I've installed like the photo, had to resolder the negative wire 90 degrees and reroute through the box for a neat install...just waiting to receive a 12 inch long x-bus wire and I'll be good to go...
I'll also need to use some valuable Log file data to record what's the best landing flight pack mAh capacity to set the Low audible voice alerts...

A interesting side note..
I had a major near total loss crash after updating my DX9 to 2.06 software...
and had a email of SPEKTRUM a week later regarding the very update..
They said this...

Attention Spektrum owner,
Our records show that you recently updated your Spektrum DX radio to version 2.06. We are reaching out to make you aware of a potential issue with this recent update.
If using the Forward Programming feature with a AS3X/Safe stabilized systems including the AR637T, AR637TA and AR630 receivers, the AS3000 plug in module or the 6250HX helicopter flight controllers, in some cases incorrect stabilized control corrections can occur. If you updated to version 2.06 on your DX transmitters and use one of the above AS3X systems, we strongly encourage you login to your account and update to version 2.07.
We're sorry for any inconvenience. If you have questions, comments or concerns please feel free to message us directly via our support staff at

I do you use an AR637T Recieiver with forward programming too and it was great but I must admit since that update I ended up flying better with it off in really high winds which was unusual but I put it down to me being a relative novice at 3d...15 months and I can with some authority do rolling harriers so not to novice...but I still thought it's me.

Anyhow after a major crash maybe due to the operator but definitely not helped with the stabilizer from gyro being off!!..due to it not operating as normal.

Anyhow I mended the plane and went out again with stabilizer on only to find I was struggling to get it dialed in I even thought centre of gravity was off and changed all my expo settings and rates WHAT THE HECK???
and eventually had a another small crash creased the wing !!!!��

Up and till the update on the DX9 everything was great flew everyday at least 7 packs for the last month, so after receiving the above email it doesn't surprise me one bit...

What if any have any of you experienced with DX9 and the 2.06 software...???
Posted by Carlton | 09-11-2020 @ 08:06 PM | 2,114 Views
Looking for a good battery charger 4 ports would be nice. But 2 ports would be sufficient. Looking to charge Li-Po. Lithium ion life batt.