Posted by cgeisel11 | 11-10-2015 @ 06:27 AM | 9,858 Views
Huck It's Cold - Collin (5 min 33 sec)

Posted by Vapor Trails | 11-05-2015 @ 03:53 PM | 20,310 Views
Kewl Warbirds...

My gs P-47, vs a full scale F-16
Posted by Flyboys714 | 11-05-2015 @ 02:30 PM | 10,397 Views
Have a giant stinger with Sachs 4.2 69 cc gas engine and a seagull ultimate biplane with a satio 125 and both planes have good servos in them .i have flown them many times and they fly great. For a short time price reduce .500 will get them both until November 13th .these planes are well worth this buyers must come and pic up .and yes ready to fly .....my contac num 4782301051
Posted by rolling circle | 11-03-2015 @ 10:19 PM | 16,831 Views
Hello everyone. Another little vid to show off the extreme characteristics of this fun new foamy from Twisted and RC Factory. It's a real sweet setup. I'm flying 9x4.2 Carbon props from PT (available at Twisted) and TP 325 mAh 2S packs that are 70c (Magna Series). It's very lite but you can fly it outside in light breeze. Real cool

THE EDGE V3 SUPERLITE (2 min 59 sec)

Posted by Mode One | 10-27-2015 @ 08:52 PM | 10,567 Views
How much clearance is needed for adequate protection from overheating of adjacent aircraft plywood structure? I've got a DLE 55RA with stock DLE cannister and header pipe installed in an Extreme Flight RC 88" Edge 540. Right now the minimum clearance is about 1/4" between the header pipe and the under side of the the motor box.
Posted by rolling circle | 10-19-2015 @ 11:44 PM | 18,937 Views
The new EDGE 540 V3 from Twisted. This plane is really going to be sweet for indoor this year. It does vector the motor off the rudder servo if you want. Super Light, thin EPP, just enough carbon to make it strong and you know, like all TH products, it's durable. Tried it out in the outdoors on a 2S 360 and liked it. Indoors, it's going to be great. Just got it trimmed and looking forward to seeing some new motor packs in the mail soon. In the vid, it is all stock with the Twisted Digital power combo and it is vectored.

Much more to come on this new release.

THE EDGE 540 V3 (1 min 51 sec)

Posted by Scottsrn | 10-19-2015 @ 11:25 PM | 13,194 Views
Really this is from my copy of FSX on my computer.
Posted by Kendalldad | 10-19-2015 @ 07:35 AM | 14,570 Views
So I decided to sell my 108 extra 330 and build the new 106 3dhs edge 540
powerplant = Gp123 on mufflers
Servos= Savox 1270tg
Posted by pittsartist | 10-15-2015 @ 04:56 PM | 13,515 Views
A young chap I met at the UK R/C Nats a year or two back is now doing a media course and needed to make a mini documentary as a course assignment.

Here's the result. Hopefully worth a watch for a few minutes.

(how many of you can identify with the "plane on a stick" comments ? ..... can't believe I was the only one )

The Dream | A Pitts Artist (11 min 3 sec)
Posted by Kevinlau | 10-15-2015 @ 05:56 AM | 12,110 Views
DOMAN RC HOBBY offers a economy series of low profile servos for 1/10 rc drift car, these series servo have been on market for 1year yet,feedback well in China market,we hope more and more people enjoy it,the spec as bellow:
Item No. DM-S0911M
Voltage: 4.8V-7.4V
Speed: 0.12 sec/60deg (4.8v) 0.10sec/60deg (6.0v)
Torque: 7.1kg.cm (4.8v) 8.5kg.cm (6.0v)
Size: 40.5mmX20mmX28.3mm
Weight: 50gram
Motor: Brushed
Gear Train: Metal(Titanium gear)
Ball Bearing: 2BB
Type: Low Profile Servo

Item No. DM-CLS119TD
Voltage: 4.8V ~ 7.4V
Speed: 0.08 sec/60deg (6.0v) 0.07sec/60deg (7.4v)
Torque: 8.3kg.cm (6.0v) 9.5kg.cm (7.4v)
Size: 40.5mmX20mmX25.5mm
Weight: 45gram
Motor: Coreless
Gear Train: Metal(Titanium gear)
Ball Bearing: 2BB
Type: Digital,Coreless,Low Profile Servo
Posted by pittsartist | 10-14-2015 @ 03:54 PM | 12,078 Views
Some pretty much "raw" footage of my initial attempts at Aerobatics in my new RV-6

Quite a contrast to the Pitts, much faster speeds and more height gain / loss within each figure - but actually quite satisfying to fly.

I really enjoyed the bit at the end playing in the clouds. The extra speed over my Pitts makes for a more dynamic feel to this particular experience.

Anyway, hope you like it (but please don't expect any elaborate editing / multi camera angles - this is "as is", 1 angle / take and some music added.)

Vans RV-6 Aerobatics and some Cloudbusting (6 min 51 sec)

Posted by FlyerEd | 10-12-2015 @ 04:04 PM | 10,882 Views
I am building a Mitsubishi Zero with a wing span of 2.1m, link: http://www.hobbyking.com/hobbyking/s...18&aff=1934455
Flying weight will be approx. 6.5kg. I have chosen a 60cc Saito radial 4 stroke engine and I would like to run a 3 blade prop, can someone help me in sizing it, the engine model is Saito FG-602R3. Any other tips would be gratefully appreciated. Thanks Ed

Posted by 108buzz | 10-10-2015 @ 08:59 PM | 11,477 Views
What are some of the best 50cc wood kits? P-51, FW190 or Spitfire?
Posted by AceWingCarrier | 10-03-2015 @ 01:12 AM | 13,013 Views
HI Guys
We have a new Transmitter Glove/Mitt for FPV flying. This transmitter Glove will fit the transmitter with monitor mounted up to 12" inches in height. When you fly all year round you need something to protect and keep your hands and equipment out of the elements and warm.
We have twelve colors to choose from, a must have.
In cold weather, getting those beautiful shots in the snow, near the ocean where there is mist and sand or for your buisness shooting for your clients in all types of weather a great investment to protect your electronics.
We are the first in the Nation and World wide to produce a FPV Transmitter Glove /Mitt For First-person view (FPV), also known as remote person view (RPV).
We have our original and the new Version for FPV
Name: Extreme Trans Glove FPV.jpg
Views: 209
Size: 589.7 KB
FPV Transmitter Gloves
Thank You For coming Bye
Ace Wing Carrier
Products Made In The USA
Posted by rolling circle | 09-29-2015 @ 09:27 PM | 18,717 Views
Hello everyone!

Here's a video we put together to show off our North East Region's finest contest of the year, the regional finals we know by the name of Black Dirt. It's situated in Goshen, New York centered in some lush farmland for sure.

The video includes freestyle flying by greats like Tyler McCormack and Chris Thorpe. We always like to shake off the contest jitters and throw down some high energy freestyles before we head home.

Special thanks to Cody Wojcik for getting video of my freestyle.

Bittersweet to have a great time and yet to also know it will be quite some time before we see each other again to compete.

So, hope you enjoy the video folks. Take care!!!


Posted by pittsartist | 09-29-2015 @ 10:42 AM | 13,162 Views
A re-edit of my last film of Wales. Some colour correction and re editing to make as watchable as poss rather than just a "holiday" video.

Dragon Lands (3 min 26 sec)

Posted by ditchit | 09-27-2015 @ 02:46 AM | 16,023 Views
Hi All - My passion outside work is flying RC. I fly my own jets and models at RC shows and events around the UK and while I'm not doing that I video the action. Over the Winter months I acquire and review new models and take them for a spin commenting on the good and bad.

Why not drop in, join the group or channel and see if I publish anything you might be interested in.

Dom (Essential RC)
Posted by AceWingCarrier | 09-27-2015 @ 12:32 AM | 11,796 Views
HI Guys
For all of you into Gliders we have a new style glider bag, The slim Line glider Bags. For many this will be an option for transport of your gliders. It's a nice design with the same key features as the standard Glider bags that we produce. They will come in many different sizes per customer request and an assortment of colors as well. Single and Double compartment.
Name: Slim Line Glider Bag By Ace Wing Carrier.JPG
Views: 190
Size: 167.8 KB
Slim Line Glider Bag
Thank You for coming bye
Ace Wing Carrier
Made In the USA
Posted by valkyrierc | 09-25-2015 @ 09:51 AM | 12,355 Views
Hello Im looking for a complete set of blueprints for a sport air 40. This was one of the best flying planes I ever had. I would like to scratch build one from the prints. Any help would be greatley appreciated.
Posted by slowgto | 09-22-2015 @ 06:53 AM | 11,483 Views


Ryan O'Connor is an adrenaline junky who has landed himself in the RC world. It all started for him one day, about twelve years ago. Ryan was surfing the web and stumbled across a flybarred RC helicopter website and his attention was peaked. He was so intrigued, he went and bought his first helicopter; from that moment on he was addicted. After ten years of flying helis, he decided to make the move to fixed wing. "Don't get me wrong, there is nothing wrong with some smack down on the deck (helicopters), but the gracefulness to all-out-crazy an airplane can do is just amazing." States Ryan.
Ryan flies at his home field in Wellington, Florida almost every day. When asked what his favorite part of flying is, Ryan replies with a simple "Not Crashing," followed by the real answer. "If I had to pick my favorite part of flying, it would be how awesome it is to see someone you helped learn to fly, make a successful flight on their own." As a father of two, one of which is learning to fly, and a very active member in the community, Ryan is always lending a hand and sharing his knowledge, and love, of the sport with anyone who asks.
For now Ryan is focused on IMAC, and his plans for the future are to compete in more competitions, and become a decent competitor from Sportsman all the way up to Advanced.