logo
Posted by felisanchez1978 | 09-29-2020 @ 10:56 PM | 192 Views
Finally assembled cowling, prop and spinner. Getting the cowling to fit nicely took me 1 hour adjusting it....pain in the neck....it sure looks nice and ready to soar the skies....choke rod visible
Posted by felisanchez1978 | 09-29-2020 @ 10:53 PM | 192 Views
I decided to go full scale in terms of the antennas, black one is a long range 5G and the white one is the COM one....some comments would be helpful and rewarding....also tried installing some scale rivets (screws) but i would love to get them 1 mm smaller though..
Posted by felisanchez1978 | 09-29-2020 @ 10:51 PM | 194 Views
finished installing CDI wire and spark plug cable. Also i made a manual choke wire easily accessible through the cowling...also fuel dot in the cowling installed
Posted by felisanchez1978 | 09-29-2020 @ 10:48 PM | 194 Views
glued windshield and top window
Posted by Carlton | 09-28-2020 @ 09:51 PM | 338 Views
Looking to purchase a ultra flash jet , can anyone give me some fees back on this bird ? What am getting going with the evo flash ? Also are there any build on this jet. Thanks
Posted by felisanchez1978 | 09-27-2020 @ 11:10 PM | 517 Views
Today I started to add scale details...looking forward to creating a very scale cockpit with seat belts, levers, etc....hope you guys like it...gluing canopy and windows tomorrow
Posted by felisanchez1978 | 09-27-2020 @ 11:09 PM | 518 Views
installing first seat gluing rails to floor and using velcro for easy removing
Posted by felisanchez1978 | 09-25-2020 @ 11:53 PM | 809 Views
I installed a red light on the panel to know when power is ready as well as a voltmeter so I can see battery level easily. Also installed second cover inside the fuselage to hide the tons of cables there. Any comments are welcome.... Looking forward to installing seats and pilot
Posted by felisanchez1978 | 09-24-2020 @ 09:05 AM | 996 Views
I attached the wings and struts and they look ok....my baby helped me paint the tank tray and the back of the firewall.....next step is to star with the fuel tubing and tank setup
Posted by artifdhdgoor | 09-24-2020 @ 01:11 AM | 991 Views
Yican Handicraft Factory is a famous China Products Manufacturers and Products factory, mainly producesChina Cement mini Buddha Statues factorycement handicrafts at the forefront of cement handicraft manufacturing. Over the years, product quality has become better and better, and the process has become more mature. There are more than one thousand products, including all kinds of exquisite cement pots, cement ornaments, cement hanging pieces, cement candlesticks, cement Buddha statues, wholesale Products and so on. Our products China cement handicrafts Suppliersare exported to all markets around the world and are becoming more and more popular and selling.
Posted by huacai | 09-23-2020 @ 10:22 PM | 1,016 Views
Company is mainly engaged in powder coating products production ,marketing and development, Company has 34 Semi-automatic production lines and ZEPPELIN bonding machine from Germany, production of 30 thousand tones within a year.
HUACAI regard product quality as the life of the enterprise, We strictly control the quality of products, in addition to own Resin factory, we use advanced testing instruments(SHIMADZU XRF,Mastersizer 3000E, Datacolor 400) to test products.
HuaCai
Posted by felisanchez1978 | 09-23-2020 @ 06:10 PM | 1,084 Views
I just wanted to add another picture of how these tundra tires look like....really huge....i will not inflate them more than the original air they came with due to extra bouncing when landing...
Posted by felisanchez1978 | 09-23-2020 @ 06:07 PM | 1,086 Views
A little bit of a mess with cables and also i will install some monokote-covered cardboard pieces in the back so i can hide cables and servos
Posted by felisanchez1978 | 09-23-2020 @ 06:05 PM | 1,088 Views
Scale lights positions, i made a light casing for installing the nav and strobes...not finished yet though...also the beacon underneath the plane can be seen
Posted by felisanchez1978 | 09-23-2020 @ 06:03 PM | 1,089 Views
FIREWALL WITH MOUNT INSTALLED AND HOLES DRILLED
Posted by felisanchez1978 | 09-23-2020 @ 07:00 AM | 1,128 Views
I decided to install the CDI on a side of the front of the fuselage using double-sided tape....i will be securing it later on when all the set up is finished
Posted by felisanchez1978 | 09-22-2020 @ 03:13 PM | 1,222 Views
Installed struts but have not tried to attach them to fuselage yet
Posted by felisanchez1978 | 09-22-2020 @ 03:11 PM | 1,221 Views
I decided to install the tachometer in the panel of the plane to make it look like a GPS jaja...the battery compartment will be hidden to make it look more scale
Posted by felisanchez1978 | 09-22-2020 @ 03:09 PM | 1,223 Views
Assembled and changed the color of the elevator and part of the rudder just to make it look different from other Cubs...hope you guys find it interesting
Posted by felisanchez1978 | 09-22-2020 @ 02:31 PM | 1,229 Views
LANDING GEAR ATTACHED WITH TUNDRA TIRES