logo
nzflyer21's blog View Details
Posted by nzflyer21 | 07-11-2019 @ 09:18 PM | 441 Views
Hi, sorry I just realized I actually haven't put a picture up of what I am building.
It is a Morane Saulnier WW1 aircraft 1/3 rd scale. The plans are from BUSA
I am yet to decide on which aircraft to model or base my paintwork on as there are several really nice schemes out there to choose from.
I hope it ok to post these pictures as I retrieved them from the internet
Posted by nzflyer21 | 07-11-2019 @ 09:02 PM | 451 Views
Hello there again
Well I have managed to get out to the garage for a couple of hours today I took a small fan heater as a comrade to in an attempt to keep me warm. Didn't work, it was still cold.
So I will put up a few pictures of my efforts. I wanted to show you the small saw bench I purchased from AliExpress this year. It has really improved my cuts and keep the cross cut square in both ways. Across and downwards.

I also purchased a very small engineer s square which is proving very handy in my effort to maintain a good finish to my work. The little saw bench can easy handle up to 1\2 inch balsa wood with ease and if you go quietly it will rip the 1\2 inch as well. It can manage thin ply ok but does not like 1\4 inch at all.
I started the tail plane and elevator in this session and set out where my Robart hinges are to go . I drilled the holes and made small notches to get a closer fit.
I think this has worked out good doing this part early in the build.
Posted by nzflyer21 | 07-10-2019 @ 12:03 AM | 610 Views
Hello again
Well again I find myself doing other things instead of working on the Morane.
Bitterly cold over the last 3 weeks with the temperature remaining cool.
We are waiting on our new log fire to be installed so doing it about hard.
Today I decided to recover an old hobby king trainer I have had for years.
It had a horrid pink film on it so time for that to go
The bones of it are still good. But very faded and the control horns I discovered during the striping down were in fact very brittle and broke as I was removing them which was disconcerting. I last flew it about 6 months ago I think so I count myself lucky not to have had a crash.
So this afternoon I pulled most of the old film off and recovered with some red film I have about. The wing is in good condition and I will place a servo in each side instead of the one central servo.
Oh well at least I feel that I have done something constructive ,not scale but something to quickly do.
Posted by nzflyer21 | 06-28-2019 @ 01:22 AM | 1,225 Views
Hello there
Well not much building this week, cold , frosty and busy at work.
My son has liberated our second vehicle for several weeks so having to walk to work in the 0530hrs frosts. What is worse is our other vehicle is too small to get a plane in.
The Morane Saulnier plans are not or don't appear to have all the details, so a bit of detective work is needed. It pretty much admitts to that the the manual from BUSA, That's ok I have time on my side.

Although there is a term that I am of sure about if you can help me with that "BHD" it is in relation to the formers .
I will attach photos.
Another thing that has been somewhat confusing,but I followed the instructions was the placement of a former at the back of the cockpit area which required me the leave a gap between one former and another?
I can't see why it is need, but I am sure all will be revealed in the fullness of time.
Posted by nzflyer21 | 06-25-2019 @ 12:21 AM | 1,463 Views
Hi again, well not much more completed this weekend, a bit of a disaster really, my son arrived with his lovely french girl for the weekend which was very nice. But my son had a project in mind to complete and as the weather was not that flash or warm ,he decided to build his cabinet in the garage.
It turned out to be a very dusty affair, pretty much covering everything in a coat of dust!
So I have spent the last few days cleaning and getting everything back to square one againl
About correctly mounting servos
.
I looked up about how to use the servo eyelets properly, I remembered reading a while ago that the eyelets go to the bottom of the servo. I have done this no, it does seem to make a difference, they feel more secure now
Is this correct?
What are your thoughts on this ? Any comments would be welcome.

I added extra support to my servo rails by placing and gluing some small plywood supports over the top of the rails. A bit of added security.

.
Posted by nzflyer21 | 06-21-2019 @ 04:55 AM | 1,652 Views
Hello there, I haven't got much completed over the last few days. The weather has turned really cold, we have had several big frosty mornings in row and by the time I get home from work there is only about an hour's light left and the temperature drops really quickly , making it to cold to be out in the workshop.

I positioned my large Hi-Tec servos where I felt they should go.which ended up being further back then I wanted. The plans don't give any clues as to where they should go,but still should be just ahead of the CG.

I am planning on a pull pull system for the rudder and elevator at this stage.
Also planning on doing a bit of scale detail in the cockpit, so have been thinking about overall accessibility to make sure I can get to the servo positions if needed once the plane is completed.
Posted by nzflyer21 | 06-18-2019 @ 02:08 AM | 1,783 Views
Hi there
I thought I would add a few pictures of the fuselage progress for the 1\3 rd scale Morane Saulnier.
I have spent abit of time working out the engine position and servo position s for the throttle and choke on the Moraine Saulnier the fuselage progress to date seems to be going along nicely. When I started to look at this model ,there seemed to be limited construction pictures online. Maybe I was looking in the wrong places.
As I mentioned earlier this is my first adventure into gas engines so lots to find out about them..
Anyway just wanted to say hello again.
Posted by nzflyer21 | 06-16-2019 @ 08:41 PM | 1,857 Views
Hi there, just wanting to introduce my self today, I am pleased to have found this web site, I have found lots of interesting topics and ideas.
I love reading all the tips and great ideas on offer and have made use of some of them. I have always flown with glow engine and now I have started my first gas engine product, A Balsa USA Morane Saulnier 1/3rd scale.

I have built the 1/4 scale Fokker DVII from scratch, it is yet to fly. Very busy at work at present so it will have to wait.

I will pop a picture on today for you to see, I have tried to give it some weathering effect to give that a go.