Posted by hexflangea | 10-21-2020 @ 03:20 AM | 3,237 Views
hex flange wood screw
Haiyan Longcheng Standard Parts Co., Ltd. is a well-know China Countersunk wood screw manufacturers and Countersunk wood screw factory, It is located in the middle section of Shanghai-Hangzhou Expressway and is frequently located in Chapu Port. TNow it is renamed Haiyan Longcheng Standard Parts Co., Ltd. It has a history of more than ten years. It specializes in manufacturing and selling all kinds of wholesale Countersunk wood screw products and has the right of self-export. The company relies on the quality management system of ISO 9001:2000 to strictly control the quality of products and work, to achieve interlocking, using PDCA cycle to ensure product quality and meet customer needs.
Posted by alanwood | 10-21-2020 @ 12:53 AM | 3,240 Views
Cleaning a window is an extensive job and you need to get the assistance of certified cleaning professionals who can work at a great height if you have to get windows high above the ground cleaned up in a proper way. You have to get a portable work platform to be able to have the window cleaned up in a proper way. Here are some of the top things that you need to do prior to starting work on a portable work gondola for window cleaning.

Check the safety harnesses

It is important to check the entire length of the harnesses, and make sure that there are no damaged or defective spots anywhere. The harness must be completely reliable. Make sure that it comes with a dependable safety lock which can get activated in the event of a fall.

Look at the joining point

Find out whether liners exist in the joining point between the safety rope and the anchor of the window cleaning gondola. Do not commence work if you are not able to find the same. In case you find window cleaning has already started, order it to be halted immediately.

Check the ambient conditions

Find out whether there are any distractions in the form of too high wind, extreme heat, drizzle etc that might disturb cleaning professionals while on the suspended access platform. If the ambient weather conditions are not suitable for working, it is better not to go ahead with the project. There can be risks otherwise, which is of course the last thing you would like to be bothered about.
Posted by Carlton | 10-17-2020 @ 12:23 PM | 3,403 Views
Looking to sell my aero works extra 260. With a da 100. Excellent condition Hitec 5955 all around Asking $ 1300.00 or best
Posted by felisanchez1978 | 10-14-2020 @ 05:03 PM | 3,780 Views
I just applied some decals that I think make my Cub look more real and cool as well....scale airplanes are fun to make and this one is not the exception
Posted by gloriairizarry | 10-06-2020 @ 01:45 AM | 4,909 Views
Gohrbpo provides the outsourcing and payroll services for the growth of your business. Our experts can run HR and payroll processes 24/7 from anywhere. We mainly work for start-ups, small businesses, and corporate. Hire the best HR consultants Company.

HR consultant
Payroll services

Posted by felisanchez1978 | 10-05-2020 @ 11:13 PM | 5,062 Views
finished applying rivets (finally got the glue mix right), assembled the plane and it looks fantastic...also added a locking system (pretty easy) to hold the window open (not for flying though) and also got 2 videos of the lights working...

lights at night
Hangar 9 Carbon Cub lights at night (0 min 40 sec)

Hangar 9 carbon cub lights (0 min 35 sec)

Posted by felisanchez1978 | 10-04-2020 @ 10:42 PM | 5,163 Views
I just glued the fuel cap assembly on both wings, the pitot tube on the left wing behind the landing light as positioned in the real plane and started to test rivets...i am trying to get the elmer's glue and water mix correct...
Posted by felisanchez1978 | 10-02-2020 @ 10:52 PM | 4,885 Views
Glued the window and now both window and door can close....i made it close tight cause some people said that the window and door tend to open mid-air.
Posted by felisanchez1978 | 10-01-2020 @ 11:20 PM | 5,010 Views
I got some details: control sticks glued and functional, removable velcro seats.

Handmade seat belt (took me 2 hours) glued and fully functional, as well as pilot ready to fly....added a life vest as souvenir in the back of the cockpit too.

throttle levers installed, seat belt mechanism, headset, flap lever ....haven't glued the right window yet....maybe over the weekend

i am planning to apply decals maybe next week and therefore making it look more scale day after day...hope you guys like it..

as you can see, i love scale details ....more details coming soon
Posted by felisanchez1978 | 10-01-2020 @ 09:25 AM | 4,764 Views
glued the door and also inside the cockpit i got a panel installed where i will install some scale things
Posted by felisanchez1978 | 09-29-2020 @ 10:56 PM | 4,991 Views
Finally assembled cowling, prop and spinner. Getting the cowling to fit nicely took me 1 hour adjusting it....pain in the neck....it sure looks nice and ready to soar the skies....choke rod visible
Posted by felisanchez1978 | 09-29-2020 @ 10:53 PM | 4,771 Views
I decided to go full scale in terms of the antennas, black one is a long range 5G and the white one is the COM one....some comments would be helpful and rewarding....also tried installing some scale rivets (screws) but i would love to get them 1 mm smaller though..
Posted by felisanchez1978 | 09-29-2020 @ 10:51 PM | 4,777 Views
finished installing CDI wire and spark plug cable. Also i made a manual choke wire easily accessible through the cowling...also fuel dot in the cowling installed
Posted by felisanchez1978 | 09-29-2020 @ 10:48 PM | 4,772 Views
glued windshield and top window
Posted by Carlton | 09-28-2020 @ 09:51 PM | 4,739 Views
Looking to purchase a ultra flash jet , can anyone give me some fees back on this bird ? What am getting going with the evo flash ? Also are there any build on this jet. Thanks
Posted by felisanchez1978 | 09-27-2020 @ 11:10 PM | 4,984 Views
Today I started to add scale details...looking forward to creating a very scale cockpit with seat belts, levers, etc....hope you guys like it...gluing canopy and windows tomorrow
Posted by felisanchez1978 | 09-27-2020 @ 11:09 PM | 4,923 Views
installing first seat gluing rails to floor and using velcro for easy removing
Posted by felisanchez1978 | 09-25-2020 @ 11:53 PM | 4,555 Views
I installed a red light on the panel to know when power is ready as well as a voltmeter so I can see battery level easily. Also installed second cover inside the fuselage to hide the tons of cables there. Any comments are welcome.... Looking forward to installing seats and pilot
Posted by felisanchez1978 | 09-24-2020 @ 09:05 AM | 4,738 Views
I attached the wings and struts and they look ok....my baby helped me paint the tank tray and the back of the firewall.....next step is to star with the fuel tubing and tank setup
Posted by artifdhdgoor | 09-24-2020 @ 01:11 AM | 4,141 Views
Yican Handicraft Factory is a famous China Products Manufacturers and Products factory, mainly producesChina Cement mini Buddha Statues factorycement handicrafts at the forefront of cement handicraft manufacturing. Over the years, product quality has become better and better, and the process has become more mature. There are more than one thousand products, including all kinds of exquisite cement pots, cement ornaments, cement hanging pieces, cement candlesticks, cement Buddha statues, wholesale Products and so on. Our products China cement handicrafts Suppliersare exported to all markets around the world and are becoming more and more popular and selling.